[PATCH v3] tty: serial: don't do termios for BTIF

[sean.wang]

From: Sean Wang <sean.wang@xxxxxxxxxxxx>

Bluetooth Interface (BTIF) is designed dedicatedly for MediaTek SOC with
BT in order to be instead of the UART interface between BT module and Host
CPU, and not exported to user space to access.

As the UART design, BTIF will be an APB slave and can transmit or receive
data by MCU access, but doesn't provide termios function like baudrate and
flow control setup.

Even LCR on offset 0xC that is just a FAKELCR
a. If FAKELCR[7] is equaled to 1, RBR(0x00), THR(0x00), IER(0x04)
   will not be readable/writable.

b. If FAKELCR is equaled to 0xBF, RBR(0x00), THR(0x00), IER(0x04),
   IIR(0x08), and LSR(0x14) will not be readable/writable.

So adding a new capability 'UART_CAP_NTIO' for the unusual unsupported
case.

Fixes: 1c16ae65e250 ("serial: 8250: of: Add new port type for MediaTek BTIF controller on MT7622/23 SoC")
Cc: Steven Liu <steven.liu@xxxxxxxxxxxx>
Suggested-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
Signed-off-by: Sean Wang <sean.wang@xxxxxxxxxxxx>
Signed-off-by: Ryder Lee <ryder.lee@xxxxxxxxxxxx>

--
v1->v2:
no change on termios->c_cflag and refine commit message

v2->v3:
change the naming from NMOD to NTIO as TIO is a well established prefix
for termios IOCTLs.
---
 drivers/tty/serial/8250/8250.h      | 1 +
 drivers/tty/serial/8250/8250_port.c | 5 ++++-
 2 files changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/tty/serial/8250/8250.h b/drivers/tty/serial/8250/8250.h
index 33ad9d6de532..234d8db470c0 100644
--- a/drivers/tty/serial/8250/8250.h
+++ b/drivers/tty/serial/8250/8250.h
@@ -82,6 +82,7 @@ struct serial8250_config {
 #define UART_CAP_MINI	(1 << 17)	/* Mini UART on BCM283X family lacks:
 					 * STOP PARITY EPAR SPAR WLEN5 WLEN6
 					 */
+#define UART_CAP_NTIO	(1 << 18)	/* UART doesn't do termios */
 
 #define UART_BUG_QUOT	(1 << 0)	/* UART has buggy quot LSB */
 #define UART_BUG_TXEN	(1 << 1)	/* UART has buggy TX IIR status */
diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c
index 0325f2e53b74..abc974b4113f 100644
--- a/drivers/tty/serial/8250/8250_port.c
+++ b/drivers/tty/serial/8250/8250_port.c
@@ -286,7 +286,7 @@ static const struct serial8250_config uart_config[] = {
 		.tx_loadsz	= 16,
 		.fcr		= UART_FCR_ENABLE_FIFO |
 				  UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT,
-		.flags		= UART_CAP_FIFO,
+		.flags		= UART_CAP_FIFO | UART_CAP_NTIO,
 	},
 	[PORT_NPCM] = {
 		.name		= "Nuvoton 16550",
@@ -2544,6 +2544,9 @@ serial8250_do_set_termios(struct uart_port *port, struct ktermios *termios,
 	unsigned long flags;
 	unsigned int baud, quot, frac = 0;
 
+	if (up->capabilities & UART_CAP_NTIO)
+		return;
+
 	if (up->capabilities & UART_CAP_MINI) {
 		termios->c_cflag &= ~(CSTOPB | PARENB | PARODD | CMSPAR);
 		if ((termios->c_cflag & CSIZE) == CS5 ||
-- 
2.25.1