Re: [PATCH 3/3] mmc: core: fix mmc_sdio_reinit_card fail issue
From: Matthias Kaehlcke
Date: Wed Apr 22 2020 - 18:46:52 EST
Hi Yong,
On Tue, Apr 14, 2020 at 11:40:11AM +0800, Yong Mao wrote:
> From: yong mao <yong.mao@xxxxxxxxxxxx>
>
> If SDIO device is initialized by UHS mode, it will run with 1.8v power.
> In this mode, mmc_go_idle may not make SDIO device go idle successfully
> in some special SDIO device. And then it can't be re-initialized
> successfully.
> According to the logic in sdio_reset_comm and mmc_sdio_sw_reset,
> invoking mmc_set_clock(host, host->f_min) before mmc_send_io_op_cond
> can make this SDIO device back to right state.
>
The commit message isn't very concise. Suggestion for a better
structure:
mmc: core: reset clock to minimum speed during card reinit
Some buggy (?) SDIO devices don't (consistently?) enter idle mode
through mmc_go_idle() when running in UHS mode. [add rationale why
setting the clock to minimum speed fixes this]
Also the function sdio_reset_comm() mentioned in the commit message
doesn't exist in recent kernels. And mmc_sdio_sw_reset() does not invoke
mmc_send_io_op_cond(), as the commit message appears to claim.
> Signed-off-by: Yong Mao <yong.mao@xxxxxxxxxxxx>
> ---
> drivers/mmc/core/sdio.c | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/drivers/mmc/core/sdio.c b/drivers/mmc/core/sdio.c
> index f173cad..dc4dc63 100644
> --- a/drivers/mmc/core/sdio.c
> +++ b/drivers/mmc/core/sdio.c
> @@ -850,6 +850,7 @@ static int mmc_sdio_reinit_card(struct mmc_host *host)
>
> sdio_reset(host);
> mmc_go_idle(host);
> + mmc_set_clock(host, host->f_min);
mmc_sdio_sw_reset() - which is mentioned as reference in the commit
message - sets the clock speed before sdio_reset(). Should this order
be followed here too?