Re: [PATCH v13 04/11] soc: mediatek: Remove infracfg misc driver support

From: Enric Balletbo Serra
Date: Thu Apr 23 2020 - 14:20:08 EST

Next message: Enric Balletbo Serra: "Re: [PATCH v13 03/11] soc: mediatek: Add basic_clk_name to scp_power_data"
Previous message: Enric Balletbo Serra: "Re: [PATCH v13 05/11] soc: mediatek: Add multiple step bus protection control"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Hi Weiyi Lu,

Thank you for the patch

Missatge de Weiyi Lu <weiyi.lu@xxxxxxxxxxxx> del dia dv., 20 de marÃ
2020 a les 8:33:
>
> The functions provided by infracfg misc driver have no other user except
> the scpsys driver so move those into scpsys driver directly.
> And then, remove infracfg misc drvier which is no longer being used.
> BTW, in next patch, we're going to extend the bus protection functions
> with more customized arguments.
>
> Signed-off-by: Weiyi Lu <weiyi.lu@xxxxxxxxxxxx>
> ---
> drivers/soc/mediatek/Kconfig | 10 -----
> drivers/soc/mediatek/Makefile | 1 -
> drivers/soc/mediatek/mtk-infracfg.c | 79 -----------------------------------
> drivers/soc/mediatek/mtk-scpsys.c | 44 +++++++++++++++----
> drivers/soc/mediatek/scpsys.h | 28 +++++++++++++
> include/linux/soc/mediatek/infracfg.h | 39 -----------------
> 6 files changed, 63 insertions(+), 138 deletions(-)
> delete mode 100644 drivers/soc/mediatek/mtk-infracfg.c
> create mode 100644 drivers/soc/mediatek/scpsys.h
> delete mode 100644 include/linux/soc/mediatek/infracfg.h
>
> diff --git a/drivers/soc/mediatek/Kconfig b/drivers/soc/mediatek/Kconfig
> index 2114b56..f837b3c 100644
> --- a/drivers/soc/mediatek/Kconfig
> +++ b/drivers/soc/mediatek/Kconfig
> @@ -10,21 +10,12 @@ config MTK_CMDQ
> depends on ARCH_MEDIATEK || COMPILE_TEST
> select MAILBOX
> select MTK_CMDQ_MBOX
> - select MTK_INFRACFG
> help
> Say yes here to add support for the MediaTek Command Queue (CMDQ)
> driver. The CMDQ is used to help read/write registers with critical
> time limitation, such as updating display configuration during the
> vblank.
>
> -config MTK_INFRACFG
> - bool "MediaTek INFRACFG Support"
> - select REGMAP
> - help
> - Say yes here to add support for the MediaTek INFRACFG controller. The
> - INFRACFG controller contains various infrastructure registers not
> - directly associated to any device.
> -
> config MTK_PMIC_WRAP
> tristate "MediaTek PMIC Wrapper Support"
> depends on RESET_CONTROLLER
> @@ -38,7 +29,6 @@ config MTK_SCPSYS
> bool "MediaTek SCPSYS Support"
> default ARCH_MEDIATEK
> select REGMAP
> - select MTK_INFRACFG
> select PM_GENERIC_DOMAINS if PM
> help
> Say yes here to add support for the MediaTek SCPSYS power domain
> diff --git a/drivers/soc/mediatek/Makefile b/drivers/soc/mediatek/Makefile
> index b017330..2b2c2537 100644
> --- a/drivers/soc/mediatek/Makefile
> +++ b/drivers/soc/mediatek/Makefile
> @@ -1,5 +1,4 @@
> # SPDX-License-Identifier: GPL-2.0-only
> obj-$(CONFIG_MTK_CMDQ) += mtk-cmdq-helper.o
> -obj-$(CONFIG_MTK_INFRACFG) += mtk-infracfg.o
> obj-$(CONFIG_MTK_PMIC_WRAP) += mtk-pmic-wrap.o
> obj-$(CONFIG_MTK_SCPSYS) += mtk-scpsys.o
> diff --git a/drivers/soc/mediatek/mtk-infracfg.c b/drivers/soc/mediatek/mtk-infracfg.c
> deleted file mode 100644
> index 341c7ac..0000000
> --- a/drivers/soc/mediatek/mtk-infracfg.c
> +++ /dev/null
> @@ -1,79 +0,0 @@
> -// SPDX-License-Identifier: GPL-2.0-only
> -/*
> - * Copyright (c) 2015 Pengutronix, Sascha Hauer <kernel@xxxxxxxxxxxxxx>
> - */
> -
> -#include <linux/export.h>
> -#include <linux/jiffies.h>
> -#include <linux/regmap.h>
> -#include <linux/soc/mediatek/infracfg.h>
> -#include <asm/processor.h>
> -
> -#define MTK_POLL_DELAY_US 10
> -#define MTK_POLL_TIMEOUT (jiffies_to_usecs(HZ))
> -
> -#define INFRA_TOPAXI_PROTECTEN 0x0220
> -#define INFRA_TOPAXI_PROTECTSTA1 0x0228
> -#define INFRA_TOPAXI_PROTECTEN_SET 0x0260
> -#define INFRA_TOPAXI_PROTECTEN_CLR 0x0264
> -
> -/**
> - * mtk_infracfg_set_bus_protection - enable bus protection
> - * @regmap: The infracfg regmap
> - * @mask: The mask containing the protection bits to be enabled.
> - * @reg_update: The boolean flag determines to set the protection bits
> - * by regmap_update_bits with enable register(PROTECTEN) or
> - * by regmap_write with set register(PROTECTEN_SET).
> - *
> - * This function enables the bus protection bits for disabled power
> - * domains so that the system does not hang when some unit accesses the
> - * bus while in power down.
> - */
> -int mtk_infracfg_set_bus_protection(struct regmap *infracfg, u32 mask,
> - bool reg_update)
> -{
> - u32 val;
> - int ret;
> -
> - if (reg_update)
> - regmap_update_bits(infracfg, INFRA_TOPAXI_PROTECTEN, mask,
> - mask);
> - else
> - regmap_write(infracfg, INFRA_TOPAXI_PROTECTEN_SET, mask);
> -
> - ret = regmap_read_poll_timeout(infracfg, INFRA_TOPAXI_PROTECTSTA1,
> - val, (val & mask) == mask,
> - MTK_POLL_DELAY_US, MTK_POLL_TIMEOUT);
> -
> - return ret;
> -}
> -
> -/**
> - * mtk_infracfg_clear_bus_protection - disable bus protection
> - * @regmap: The infracfg regmap
> - * @mask: The mask containing the protection bits to be disabled.
> - * @reg_update: The boolean flag determines to clear the protection bits
> - * by regmap_update_bits with enable register(PROTECTEN) or
> - * by regmap_write with clear register(PROTECTEN_CLR).
> - *
> - * This function disables the bus protection bits previously enabled with
> - * mtk_infracfg_set_bus_protection.
> - */
> -
> -int mtk_infracfg_clear_bus_protection(struct regmap *infracfg, u32 mask,
> - bool reg_update)
> -{
> - int ret;
> - u32 val;
> -
> - if (reg_update)
> - regmap_update_bits(infracfg, INFRA_TOPAXI_PROTECTEN, mask, 0);
> - else
> - regmap_write(infracfg, INFRA_TOPAXI_PROTECTEN_CLR, mask);
> -
> - ret = regmap_read_poll_timeout(infracfg, INFRA_TOPAXI_PROTECTSTA1,
> - val, !(val & mask),
> - MTK_POLL_DELAY_US, MTK_POLL_TIMEOUT);
> -
> - return ret;
> -}
> diff --git a/drivers/soc/mediatek/mtk-scpsys.c b/drivers/soc/mediatek/mtk-scpsys.c
> index db35a28..e50a568 100644
> --- a/drivers/soc/mediatek/mtk-scpsys.c
> +++ b/drivers/soc/mediatek/mtk-scpsys.c
> @@ -10,8 +10,9 @@
> #include <linux/of_device.h>
> #include <linux/platform_device.h>
> #include <linux/pm_domain.h>
> +#include <linux/regmap.h>
> #include <linux/regulator/consumer.h>
> -#include <linux/soc/mediatek/infracfg.h>
> +#include "scpsys.h"

Are the defines in this include going to be used somewhere else?
Otherwise, you can add the defines in this file directly.

>
> #include <dt-bindings/power/mt2701-power.h>
> #include <dt-bindings/power/mt2712-power.h>
> @@ -251,25 +252,50 @@ static int scpsys_sram_disable(struct scp_domain *scpd, void __iomem *ctl_addr)
> static int scpsys_bus_protect_enable(struct scp_domain *scpd)
> {
> struct scp *scp = scpd->scp;
> + struct regmap *infracfg = scp->infracfg;
> + u32 mask = scpd->data->bus_prot_mask;
> + bool reg_update = scp->bus_prot_reg_update;
> + u32 val;
> + int ret;
>
> - if (!scpd->data->bus_prot_mask)
> + if (!mask)
> return 0;
>
> - return mtk_infracfg_set_bus_protection(scp->infracfg,
> - scpd->data->bus_prot_mask,
> - scp->bus_prot_reg_update);
> + if (reg_update)
> + regmap_update_bits(infracfg, INFRA_TOPAXI_PROTECTEN, mask,
> + mask);
> + else
> + regmap_write(infracfg, INFRA_TOPAXI_PROTECTEN_SET, mask);
> +
> + ret = regmap_read_poll_timeout(infracfg, INFRA_TOPAXI_PROTECTSTA1,
> + val, (val & mask) == mask,
> + MTK_POLL_DELAY_US, MTK_POLL_TIMEOUT);
> +
> + return ret;
> }
>
> static int scpsys_bus_protect_disable(struct scp_domain *scpd)
> {
> struct scp *scp = scpd->scp;
> + struct regmap *infracfg = scp->infracfg;
> + u32 mask = scpd->data->bus_prot_mask;
> + bool reg_update = scp->bus_prot_reg_update;
> + u32 val;
> + int ret;
>
> - if (!scpd->data->bus_prot_mask)
> + if (!mask)
> return 0;
>
> - return mtk_infracfg_clear_bus_protection(scp->infracfg,
> - scpd->data->bus_prot_mask,
> - scp->bus_prot_reg_update);
> + if (reg_update)
> + regmap_update_bits(infracfg, INFRA_TOPAXI_PROTECTEN, mask, 0);
> + else
> + regmap_write(infracfg, INFRA_TOPAXI_PROTECTEN_CLR, mask);
> +
> + ret = regmap_read_poll_timeout(infracfg, INFRA_TOPAXI_PROTECTSTA1,
> + val, !(val & mask),
> + MTK_POLL_DELAY_US, MTK_POLL_TIMEOUT);
> +
> + return ret;
> }
>
> static int scpsys_power_on(struct generic_pm_domain *genpd)
> diff --git a/drivers/soc/mediatek/scpsys.h b/drivers/soc/mediatek/scpsys.h
> new file mode 100644
> index 0000000..ad2559b
> --- /dev/null
> +++ b/drivers/soc/mediatek/scpsys.h
> @@ -0,0 +1,28 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +#ifndef __SOC_MEDIATEK_SCPSYS_H
> +#define __SOC_MEDIATEK_SCPSYS_H
> +
> +#define INFRA_TOPAXI_PROTECTEN 0x0220
> +#define INFRA_TOPAXI_PROTECTSTA1 0x0228
> +#define INFRA_TOPAXI_PROTECTEN_SET 0x0260
> +#define INFRA_TOPAXI_PROTECTEN_CLR 0x0264
> +
> +#define MT2701_TOP_AXI_PROT_EN_MM_M0 BIT(1)
> +#define MT2701_TOP_AXI_PROT_EN_CONN_M BIT(2)
> +#define MT2701_TOP_AXI_PROT_EN_CONN_S BIT(8)
> +
> +#define MT7622_TOP_AXI_PROT_EN_ETHSYS (BIT(3) | BIT(17))
> +#define MT7622_TOP_AXI_PROT_EN_HIF0 (BIT(24) | BIT(25))
> +#define MT7622_TOP_AXI_PROT_EN_HIF1 (BIT(26) | BIT(27) | \
> + BIT(28))
> +#define MT7622_TOP_AXI_PROT_EN_WB (BIT(2) | BIT(6) | \
> + BIT(7) | BIT(8))
> +
> +#define MT8173_TOP_AXI_PROT_EN_MM_M0 BIT(1)
> +#define MT8173_TOP_AXI_PROT_EN_MM_M1 BIT(2)
> +#define MT8173_TOP_AXI_PROT_EN_MFG_S BIT(14)
> +#define MT8173_TOP_AXI_PROT_EN_MFG_M0 BIT(21)
> +#define MT8173_TOP_AXI_PROT_EN_MFG_M1 BIT(22)
> +#define MT8173_TOP_AXI_PROT_EN_MFG_SNOOP_OUT BIT(23)
> +
> +#endif /* __SOC_MEDIATEK_SCPSYS_H */
> diff --git a/include/linux/soc/mediatek/infracfg.h b/include/linux/soc/mediatek/infracfg.h
> deleted file mode 100644
> index fd25f01..0000000
> --- a/include/linux/soc/mediatek/infracfg.h
> +++ /dev/null
> @@ -1,39 +0,0 @@
> -/* SPDX-License-Identifier: GPL-2.0 */
> -#ifndef __SOC_MEDIATEK_INFRACFG_H
> -#define __SOC_MEDIATEK_INFRACFG_H
> -
> -#define MT8173_TOP_AXI_PROT_EN_MCI_M2 BIT(0)
> -#define MT8173_TOP_AXI_PROT_EN_MM_M0 BIT(1)
> -#define MT8173_TOP_AXI_PROT_EN_MM_M1 BIT(2)
> -#define MT8173_TOP_AXI_PROT_EN_MMAPB_S BIT(6)
> -#define MT8173_TOP_AXI_PROT_EN_L2C_M2 BIT(9)
> -#define MT8173_TOP_AXI_PROT_EN_L2SS_SMI BIT(11)
> -#define MT8173_TOP_AXI_PROT_EN_L2SS_ADD BIT(12)
> -#define MT8173_TOP_AXI_PROT_EN_CCI_M2 BIT(13)
> -#define MT8173_TOP_AXI_PROT_EN_MFG_S BIT(14)
> -#define MT8173_TOP_AXI_PROT_EN_PERI_M0 BIT(15)
> -#define MT8173_TOP_AXI_PROT_EN_PERI_M1 BIT(16)
> -#define MT8173_TOP_AXI_PROT_EN_DEBUGSYS BIT(17)
> -#define MT8173_TOP_AXI_PROT_EN_CQ_DMA BIT(18)
> -#define MT8173_TOP_AXI_PROT_EN_GCPU BIT(19)
> -#define MT8173_TOP_AXI_PROT_EN_IOMMU BIT(20)
> -#define MT8173_TOP_AXI_PROT_EN_MFG_M0 BIT(21)
> -#define MT8173_TOP_AXI_PROT_EN_MFG_M1 BIT(22)
> -#define MT8173_TOP_AXI_PROT_EN_MFG_SNOOP_OUT BIT(23)
> -
> -#define MT2701_TOP_AXI_PROT_EN_MM_M0 BIT(1)
> -#define MT2701_TOP_AXI_PROT_EN_CONN_M BIT(2)
> -#define MT2701_TOP_AXI_PROT_EN_CONN_S BIT(8)
> -
> -#define MT7622_TOP_AXI_PROT_EN_ETHSYS (BIT(3) | BIT(17))
> -#define MT7622_TOP_AXI_PROT_EN_HIF0 (BIT(24) | BIT(25))
> -#define MT7622_TOP_AXI_PROT_EN_HIF1 (BIT(26) | BIT(27) | \
> - BIT(28))
> -#define MT7622_TOP_AXI_PROT_EN_WB (BIT(2) | BIT(6) | \
> - BIT(7) | BIT(8))
> -
> -int mtk_infracfg_set_bus_protection(struct regmap *infracfg, u32 mask,
> - bool reg_update);
> -int mtk_infracfg_clear_bus_protection(struct regmap *infracfg, u32 mask,
> - bool reg_update);
> -#endif /* __SOC_MEDIATEK_INFRACFG_H */
> --
> 1.8.1.1.dirty
> _______________________________________________
> Linux-mediatek mailing list
> Linux-mediatek@xxxxxxxxxxxxxxxxxxx
> http://lists.infradead.org/mailman/listinfo/linux-mediatek

Next message: Enric Balletbo Serra: "Re: [PATCH v13 03/11] soc: mediatek: Add basic_clk_name to scp_power_data"
Previous message: Enric Balletbo Serra: "Re: [PATCH v13 05/11] soc: mediatek: Add multiple step bus protection control"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]