Re: [RFC PATCH v9 6/9] media: tegra: Add Tegra210 Video input driver

From: Sowjanya Komatineni
Date: Thu Apr 23 2020 - 18:59:26 EST



On 4/23/20 3:55 PM, Dmitry Osipenko wrote:
External email: Use caution opening links or attachments


23.04.2020 19:50, Sowjanya Komatineni ÐÐÑÐÑ:
On 4/23/20 12:48 AM, Hans Verkuil wrote:
External email: Use caution opening links or attachments


On 22/04/2020 08:18, Sowjanya Komatineni wrote:
Tegra210 contains a powerful Video Input (VI) hardware controller
which can support up to 6 MIPI CSI camera sensors.

Each Tegra CSI port can be one-to-one mapped to VI channel and can
capture from an external camera sensor connected to CSI or from
built-in test pattern generator.

Tegra210 supports built-in test pattern generator from CSI to VI.

This patch adds a v4l2 capture driver with media interface for
Tegra210 built-in CSI to VI test pattern generator.

This patch includes TPG support only and all the video pipeline
configuration happens through the video device node.

Acked-by: Thierry Reding <treding@xxxxxxxxxx>
Signed-off-by: Sowjanya Komatineni <skomatineni@xxxxxxxxxx>
---
drivers/staging/media/Kconfig |ÂÂÂ 2 +
drivers/staging/media/Makefile |ÂÂÂ 1 +
drivers/staging/media/tegra/Kconfig |ÂÂ 13 +
drivers/staging/media/tegra/Makefile |ÂÂÂ 8 +
drivers/staging/media/tegra/TODO |ÂÂ 10 +
drivers/staging/media/tegra/common.h |Â 262 ++++++++
drivers/staging/media/tegra/csi.c |Â 606 +++++++++++++++++
drivers/staging/media/tegra/csi.h |Â 149 +++++
drivers/staging/media/tegra/tegra210.c |Â 709 ++++++++++++++++++++
drivers/staging/media/tegra/tegra210.h |Â 190 ++++++
drivers/staging/media/tegra/vi.c | 1132
++++++++++++++++++++++++++++++++
drivers/staging/media/tegra/vi.h |ÂÂ 83 +++
drivers/staging/media/tegra/video.c |Â 153 +++++
drivers/staging/media/tegra/video.h |ÂÂ 34 +
14 files changed, 3352 insertions(+)
create mode 100644 drivers/staging/media/tegra/Kconfig
create mode 100644 drivers/staging/media/tegra/Makefile
create mode 100644 drivers/staging/media/tegra/TODO
create mode 100644 drivers/staging/media/tegra/common.h
create mode 100644 drivers/staging/media/tegra/csi.c
create mode 100644 drivers/staging/media/tegra/csi.h
create mode 100644 drivers/staging/media/tegra/tegra210.c
create mode 100644 drivers/staging/media/tegra/tegra210.h
create mode 100644 drivers/staging/media/tegra/vi.c
create mode 100644 drivers/staging/media/tegra/vi.h
create mode 100644 drivers/staging/media/tegra/video.c
create mode 100644 drivers/staging/media/tegra/video.h
With 'make menuconfig' I get this:

scripts/kconfig/mconf Kconfig

WARNING: unmet direct dependencies detected for TEGRA_HOST1X
Depends on [n]: HAS_IOMEM [=y] && (ARCH_TEGRA || ARM &&
COMPILE_TEST [=y])
Selected by [y]:
- VIDEO_TEGRA [=y] && STAGING [=y] && STAGING_MEDIA [=y] &&
MEDIA_SUPPORT [=y] && (ARCH_TEGRA || COMPILE_TEST [=y])

This is an x86_64 build with COMPILE_TEST set. I can provide my full
.config if you need it.

CONFIG_TEGRA_HOST1X=y
CONFIG_VIDEO_TEGRA=y

Regards,

Hans
Hi Hans,

In v7, changed Kconfig to remove ARM. But looks like we should limit

TEGRA_HOST1X also limits compile to ARM only so running VIDEO_TEGRA on
x86_64 shows above warning.

We should limit compile to ARM for CONFIG_VIDEO_TEGRA.

Will update CONFIG_VIDEO_TEGRA dependency to use ARM && COMPILE_TEST
like I had in previous version. Sorry about this.


Also, I see some changes went into latest linux-next staging media
Kconfig, So, will have my patches on top of today's linux-next.
VIDEO_TEGRA should depend on TEGRA_HOST1X and not select it.

depends on (ARCH_TEGRA && TEGRA_HOST1X) || COMPILE_TEST

Was selecting it to auto-select Tegra host1x when video_tegra is enabled.

Yes, can use depends on