RE: [PATCH v8 0/3] 32-bit access for TX/RX hold registers for samsung_tty driver

[Hyunki Koo]

On Sat, April 21, 2020 at 08:36:00 AM +0900, Hyunki Koo wrote:
> 
> Change in v8:
> - spit into 3 patch
>   [1/3] create the new functions with no functional change to the code as-
> is.
>   Replace rd_regb/wr_regb with rd_reg/wr_reg for general usage.
>   [2/3] add the new binding reg-io-width in device tree
>   [3/3] add the new funtinality of rd_reg / wr_reg and wr_reg_barrier
>         to support 32-bit access for the TX/RX hold registers UTXH and URXH.
> 
> Change in v7:
> - [1/2] correct build error on running 'make dt_binding_check'
> Documentation/devicetree/bindings/serial/samsung_uart.yaml:  mapping
> values are not allowed in this context
>   in "<unicode string>", line 36, column 13
>   Documentation/devicetree/bindings/Makefile:12: recipe for target
> 'Documentation/devicetree/bindings/serial/samsung_uart.example.dts'
> failed
>   make[1]: ***
> [Documentation/devicetree/bindings/serial/samsung_uart.example.dts]
> Error 1
>   make[1]: *** Waiting for unfinished jobs....
>   Makefile:1262: recipe for target 'dt_binding_check' failed
>   make: *** [dt_binding_check] Error 2
> - [2/2] add commit message of reviewed by and tested by in commit
> message
>   Reviewed-by: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
>   Tested on Odroid HC1 (Exynos5422):
>   Tested-by: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
> 
> Change in v6:
> - [2/2] clean description of reg-io-width
>   allOf is not needed. Just enum [1, 2] is enough.
> 
> Changes in v5:
> - spit into 2 patch, newly added patch for dt-binding
>   [1/2] newly added dt-binding and go as first patch in this series.
>   [2/2] go as second patch in this series.
> 
> Changes in v4:
> - correct variable types and change misleading function name
> 
> Changes in v3:
> - line 2031: remove redundant init value  for ourport->port.iotype
> 
> Changes in v2:
> - line 954 : change rd_regl to rd_reg in for backward compatibility.
> - line 2031: Add init value for ourport->port.iotype  to UPIO_MEM
> 
> 
> Hyunki Koo (3):
>   serial: samsung: Replace rd_regb/wr_regb with rd_reg/wr_reg
>   dt-bindings: serial: Add reg-io-width compatible
>   tty: samsung_tty: 32-bit access for TX/RX hold registers
> 
>  .../devicetree/bindings/serial/samsung_uart.yaml   |  8 +++
>  drivers/tty/serial/samsung_tty.c                   | 76 ++++++++++++++++++---
> -
>  2 files changed, 72 insertions(+), 12 deletions(-)
> 
> --
> 2.15.0.rc1

Hi Greg KH

Can I ask is this series patch are acceptable or not?
Do you think, I have to do any further action  for this patch?