[PATCH v2 16/91] clk: bcm: rpi: Rename is_prepared function

[Maxime Ripard]

The raspberrypi_fw_pll_is_on function doesn't only apply to PLL
registered in the driver, but any clock exposed by the firmware.

Since we also implement the is_prepared hook, make the function
consistent with the other function names.

Cc: Michael Turquette <mturquette@xxxxxxxxxxxx>
Cc: linux-clk@xxxxxxxxxxxxxxx
Acked-by: Nicolas Saenz Julienne <nsaenzjulienne@xxxxxxx>
Reviewed-by: Stephen Boyd <sboyd@xxxxxxxxxx>
Signed-off-by: Maxime Ripard <maxime@xxxxxxxxxx>
---
 drivers/clk/bcm/clk-raspberrypi.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/clk/bcm/clk-raspberrypi.c b/drivers/clk/bcm/clk-raspberrypi.c
index 6e8977b70e38..99201f58a609 100644
--- a/drivers/clk/bcm/clk-raspberrypi.c
+++ b/drivers/clk/bcm/clk-raspberrypi.c
@@ -87,7 +87,7 @@ static int raspberrypi_clock_property(struct rpi_firmware *firmware,
 	return 0;
 }
 
-static int raspberrypi_fw_pll_is_on(struct clk_hw *hw)
+static int raspberrypi_fw_is_prepared(struct clk_hw *hw)
 {
 	struct raspberrypi_clk_data *data =
 		container_of(hw, struct raspberrypi_clk_data, hw);
@@ -170,7 +170,7 @@ static int raspberrypi_pll_determine_rate(struct clk_hw *hw,
 }
 
 static const struct clk_ops raspberrypi_firmware_pll_clk_ops = {
-	.is_prepared = raspberrypi_fw_pll_is_on,
+	.is_prepared = raspberrypi_fw_is_prepared,
 	.recalc_rate = raspberrypi_fw_pll_get_rate,
 	.set_rate = raspberrypi_fw_pll_set_rate,
 	.determine_rate = raspberrypi_pll_determine_rate,
-- 
git-series 0.9.1