Re: [PATCH v4 4/4] iio: vcnl4000: Add buffer support for VCNL4010/20.

[Jonathan Cameron]

On Wed, 22 Apr 2020 10:14:21 +0200
Mathieu Othacehe <m.othacehe@xxxxxxxxx> wrote:

> >> +static int vcnl4010_buffer_predisable(struct iio_dev *indio_dev)
> >> +{
> >> +       struct vcnl4000_data *data = iio_priv(indio_dev);
> >> +       int ret, ret_disable;
> >> +
> >> +       ret = i2c_smbus_write_byte_data(data->client, VCNL4010_INT_CTRL, 0);
> >> +       if (ret < 0)
> >> +               goto end;
> >> +
> >> +       ret = i2c_smbus_write_byte_data(data->client, VCNL4000_COMMAND, 0);
> >> +
> >> +end:  
> >  
> >> +       ret_disable = iio_triggered_buffer_predisable(indio_dev);
> >> +       if (ret == 0)
> >> +               ret = ret_disable;  
> >
> > What is this?
> >
> > Can't you rather call IIO API first, and then try to handle the rest?  
> 
> Well, iio_triggered_buffer_predisable will call free_irq which requires
> that the interruption source is disabled, hence this strange pattern.
> 
> However, this may be some misunderstanding from me, but I noticed
> something strange here. In a configuration with one CPU and
> CONFIG_PREEMPT disabled, I have kernel lockups when disabling the
> buffer.
> 
> This is because free_irq calls synchronize_irq that will wait for any
> IRQ handler to be over. If the kthread handling the interruption is
> still running, it has no chances to terminate, and synchronize_irq waits
> forever. So maybe I'm missing something.

That is indeed worrying.  The synchronize_irq is documented as
sleeping if we have a threaded interrupt.  From a quick look I'd have
expected the wait in there to result in the interrupt thread being able
to complete whether or not we had preemption enabled.

I wonder what I'm missing...

Jonathan


> 
> Anyway, I'll send a v5 addressing your remarks.
> 
> Thanks,
> 
> Mathieu