Re: [RFC PATCH v10 6/9] media: tegra: Add Tegra210 Video input driver

[Dmitry Osipenko]

26.04.2020 02:13, Dmitry Osipenko ÐÐÑÐÑ:
> 24.04.2020 06:55, Sowjanya Komatineni ÐÐÑÐÑ:
>> +static int __maybe_unused vi_runtime_resume(struct device *dev)
>> +{
>> +	struct tegra_vi *vi = dev_get_drvdata(dev);
>> +	int ret;
>> +
>> +	ret = regulator_enable(vi->vdd);
>> +	if (ret) {
>> +		dev_err(dev, "failed to enable VDD supply: %d\n", ret);
>> +		return ret;
>> +	}
>> +
>> +	ret = clk_set_rate(vi->clk, vi->soc->vi_max_clk_hz);
>> +	if (ret) {
>> +		dev_err(dev, "failed to set vi clock rate: %d\n", ret);
>> +		goto disable_vdd;
>> +	}
> 
> Isn't setting clock rate using assigned-clocks in a device-tree enough?
> Could you please clarify why this vi_max_clk_hz is needed?
> 

In that case it should be wrong to set the clock rate in the RPM
callback because RPM works asynchronously and RPM may not be suspended
on TGP -> sensor source switch.