Re: [PATCH v3] powerpc/setup_64: Set cache-line-size based on cache-block-size

[Michael Ellerman]

On Thu, 2020-04-16 at 22:19:08 UTC, Chris Packham wrote:
> If {i,d}-cache-block-size is set and {i,d}-cache-line-size is not, use
> the block-size value for both. Per the devicetree spec cache-line-size
> is only needed if it differs from the block size.
> 
> Originally the code would fallback from block size to line size. An
> error message was printed if both properties were missing.
> 
> Later the code was refactored to use clearer names and logic but it
> inadvertently made line size a required property. This caused the
> default values to be used and in turn leads to Power9 systems using the
> wrong size.
> 
> Fixes: bd067f83b084 ("powerpc/64: Fix naming of cache block vs. cache lin=
> e")
> Signed-off-by: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>

Applied to powerpc fixes, thanks.

https://git.kernel.org/powerpc/c/94c0b013c98583614e1ad911e8795ca36da34a85

cheers