RE: [PATCH v8 0/3] 32-bit access for TX/RX hold registers for samsung_tty driver

[Hyunki Koo]

On Fri, Apr 24, 2020 at 02:37:18PM +0900, Greg KH wrote:
> On Fri, Apr 24, 2020 at 09:40:18AM +0900, Hyunki Koo wrote:
> > On Sat, April 21, 2020 at 08:36:00 AM +0900, Hyunki Koo wrote:
> > >
> > > Change in v8:
> > > - spit into 3 patch
> > >   [1/3] create the new functions with no functional change to the
> > > code as- is.
> > >   Replace rd_regb/wr_regb with rd_reg/wr_reg for general usage.
> > >   [2/3] add the new binding reg-io-width in device tree
> > >   [3/3] add the new funtinality of rd_reg / wr_reg and wr_reg_barrier
> > >         to support 32-bit access for the TX/RX hold registers UTXH and
> URXH.
> > >
> > > Change in v7:
> > > - [1/2] correct build error on running 'make dt_binding_check'
> > > Documentation/devicetree/bindings/serial/samsung_uart.yaml:
> mapping
> > > values are not allowed in this context
> > >   in "<unicode string>", line 36, column 13
> > >   Documentation/devicetree/bindings/Makefile:12: recipe for target
> > >
> 'Documentation/devicetree/bindings/serial/samsung_uart.example.dts'
> > > failed
> > >   make[1]: ***
> > >
> [Documentation/devicetree/bindings/serial/samsung_uart.example.dts]
> > > Error 1
> > >   make[1]: *** Waiting for unfinished jobs....
> > >   Makefile:1262: recipe for target 'dt_binding_check' failed
> > >   make: *** [dt_binding_check] Error 2
> > > - [2/2] add commit message of reviewed by and tested by in commit
> > > message
> > >   Reviewed-by: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
> > >   Tested on Odroid HC1 (Exynos5422):
> > >   Tested-by: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
> > >
> > > Change in v6:
> > > - [2/2] clean description of reg-io-width
> > >   allOf is not needed. Just enum [1, 2] is enough.
> > >
> > > Changes in v5:
> > > - spit into 2 patch, newly added patch for dt-binding
> > >   [1/2] newly added dt-binding and go as first patch in this series.
> > >   [2/2] go as second patch in this series.
> > >
> > > Changes in v4:
> > > - correct variable types and change misleading function name
> > >
> > > Changes in v3:
> > > - line 2031: remove redundant init value  for ourport->port.iotype
> > >
> > > Changes in v2:
> > > - line 954 : change rd_regl to rd_reg in for backward compatibility.
> > > - line 2031: Add init value for ourport->port.iotype  to UPIO_MEM
> > >
> > >
> > > Hyunki Koo (3):
> > >   serial: samsung: Replace rd_regb/wr_regb with rd_reg/wr_reg
> > >   dt-bindings: serial: Add reg-io-width compatible
> > >   tty: samsung_tty: 32-bit access for TX/RX hold registers
> > >
> > >  .../devicetree/bindings/serial/samsung_uart.yaml   |  8 +++
> > >  drivers/tty/serial/samsung_tty.c                   | 76
> ++++++++++++++++++---
> > > -
> > >  2 files changed, 72 insertions(+), 12 deletions(-)
> > >
> > > --
> > > 2.15.0.rc1
> >
> > Hi Greg KH
> >
> > Can I ask is this series patch are acceptable or not?
> > Do you think, I have to do any further action  for this patch?
> >
> 
> It's been 3 days, give us a chance please...
> 
> Also, I need to wait for the dt patch to be reviewed first before I can take
> any of this, so that's up to the DT maintainers.
> 
> thanks,
> 
> greg k-h

Sorry to disturb you and Thank you for your answer,
I will wait.