Re: [PATCH] phy: samsung: s5pv210-usb2: Add delay after reset

[Kishon Vijay Abraham I]

Hi Jonathan,

On 4/25/2020 11:06 PM, Jonathan Bakker wrote:
> The USB phy takes some time to reset, so make sure we give it to it. The
> delay length was taken from the 4x12 phy driver.
> 
> This manifested in issues with the DWC2 driver since commit fe369e1826b3
> ("usb: dwc2: Make dwc2_readl/writel functions endianness-agnostic.")
> where the endianness check would read the DWC ID as 0 due to the phy still
> resetting, resulting in the wrong endian mode being chosen.
> 
> Signed-off-by: Jonathan Bakker <xc-racer2@xxxxxxx>
> ---
>  drivers/phy/samsung/phy-s5pv210-usb2.c | 4 ++++
>  1 file changed, 4 insertions(+)
> 
> diff --git a/drivers/phy/samsung/phy-s5pv210-usb2.c b/drivers/phy/samsung/phy-s5pv210-usb2.c
> index 56a5083fe6f9..32be62e49804 100644
> --- a/drivers/phy/samsung/phy-s5pv210-usb2.c
> +++ b/drivers/phy/samsung/phy-s5pv210-usb2.c
> @@ -139,6 +139,10 @@ static void s5pv210_phy_pwr(struct samsung_usb2_phy_instance *inst, bool on)
>  		udelay(10);
>  		rst &= ~rstbits;
>  		writel(rst, drv->reg_phy + S5PV210_UPHYRST);
> +		/* The following delay is necessary for the reset sequence to be
> +		 * completed
> +		 */
> +		udelay(80);

Please fix the following checkpatch check error.
CHECK: usleep_range is preferred over udelay; see
Documentation/timers/timers-howto.rst
#151: FILE: drivers/phy/samsung/phy-s5pv210-usb2.c:145:
+               udelay(80);

total: 0 errors, 0 warnings, 1 checks, 10 lines checked

Thanks
Kishon