[ 0.000000] KASLR: No safe seed for randomizing the kernel base. [ 0.000000] MMU: Supported page sizes [ 0.000000] 4 KB as direct [ 0.000000] 2048 KB as direct & indirect [ 0.000000] 4096 KB as direct [ 0.000000] 16384 KB as direct [ 0.000000] 65536 KB as direct [ 0.000000] 262144 KB as direct [ 0.000000] 1048576 KB as direct [ 0.000000] MMU: Book3E HW tablewalk enabled [ 0.000000] Linux version 5.7.0-rc2-00865-gf55c3370c485 (dja@dja-thinkpad) (gcc version 9.2.1 20191008 (Ubuntu 9.2.1-9ubuntu1), GNU ld (GNU Binutils for Ubuntu) 2.33) #326 SMP Mon Apr 27 23:26:22 AEST 2020 [ 0.000000] Argh, can't find dcache properties ! [ 0.000000] Argh, can't find icache properties ! [ 0.000000] Using CoreNet Generic machine description [ 0.000000] Found legacy serial port 0 for /soc@ffe000000/serial@11c500 [ 0.000000] mem=ffe11c500, taddr=ffe11c500, irq=0, clk=366666663, speed=0 [ 0.000000] Found legacy serial port 1 for /soc@ffe000000/serial@11c600 [ 0.000000] mem=ffe11c600, taddr=ffe11c600, irq=0, clk=366666663, speed=0 [ 0.000000] Found legacy serial port 2 for /soc@ffe000000/serial@11d500 [ 0.000000] mem=ffe11d500, taddr=ffe11d500, irq=0, clk=366666663, speed=0 [ 0.000000] Found legacy serial port 3 for /soc@ffe000000/serial@11d600 [ 0.000000] mem=ffe11d600, taddr=ffe11d600, irq=0, clk=366666663, speed=0 [ 0.000000] ioremap() called early from .find_legacy_serial_ports+0x6d0/0x7c0. Use early_ioremap() instead [ 0.000000] printk: bootconsole [udbg0] enabled [ 0.000000] CPU maps initialized for 2 threads per core [ 0.000000] (thread shift is 1) [ 0.000000] Allocated 1984 bytes for 24 pacas [ 0.000000] ----------------------------------------------------- [ 0.000000] phys_mem_size = 0x180000000 [ 0.000000] dcache_bsize = 0x40 [ 0.000000] icache_bsize = 0x40 [ 0.000000] cpu_features = 0x00000003009003b6 [ 0.000000] possible = 0x00000003009003b6 [ 0.000000] always = 0x00000003008003b4 [ 0.000000] cpu_user_features = 0xdc008000 0x08000000 [ 0.000000] mmu_features = 0x000a0010 [ 0.000000] firmware_features = 0x0000000000000000 [ 0.000000] physical_start = 0x10080000 [ 0.000000] ----------------------------------------------------- [ 0.000000] CoreNet Generic board [ 0.000000] barrier-nospec: using isync; sync as speculation barrier [ 0.000000] barrier-nospec: patched 395 locations [ 0.000000] Top of RAM: 0x180000000, Total RAM: 0x180000000 [ 0.000000] Memory hole size: 0MB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000000000-0x000000007fffffff] [ 0.000000] Normal [mem 0x0000000080000000-0x000000017fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000017fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000017fffffff] [ 0.000000] On node 0 totalpages: 1572864 [ 0.000000] DMA zone: 8192 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 524288 pages, LIFO batch:63 [ 0.000000] Normal zone: 16384 pages used for memmap [ 0.000000] Normal zone: 1048576 pages, LIFO batch:63 [ 0.000000] MMU: Allocated 2112 bytes of context maps for 255 contexts [ 0.000000] percpu: Embedded 32 pages/cpu s91736 r0 d39336 u131072 [ 0.000000] pcpu-alloc: s91736 r0 d39336 u131072 alloc=1*1048576 [ 0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15 [ 0.000000] pcpu-alloc: [0] 16 17 18 19 20 21 22 23 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1548288 [ 0.000000] Kernel command line: root=/dev/nfs rw nfsroot=10.1.2.1:/srv/sid-ppc64 ip=10.1.2.2:10.1.2.1:10.1.1.1:255.255.0.0:t4240rdb:eth0:off console=ttyS0,115200 [ 0.000000] printk: log_buf_len individual max cpu contribution: 16384 bytes [ 0.000000] printk: log_buf_len total cpu_extra contributions: 376832 bytes [ 0.000000] printk: log_buf_len min size: 131072 bytes [ 0.000000] printk: log_buf_len: 524288 bytes [ 0.000000] printk: early log buf free: 126824(96%) [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 6004108K/6291456K available (10468K kernel code, 1988K rwdata, 3396K rodata, 4112K init, 355K bss, 287348K reserved, 0K cma-reserved) [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] NR_IRQS: 512, nr_irqs: 512, preallocated irqs: 16 [ 0.000000] mpic: Setting up MPIC " OpenPIC " version 1.2 at ffe040000, max 24 CPUs [ 0.000000] mpic: ISU size: 512, shift: 9, mask: 1ff [ 0.000000] mpic: Initializing for 512 sources [ 0.000000] random: get_random_u64 called from .start_kernel+0x734/0x964 with crng_init=0 [ 0.000000] time_init: decrementer frequency = 45.833333 MHz [ 0.000000] time_init: processor frequency = 1666.666650 MHz [ 0.000003] clocksource: timebase: mask: 0xffffffffffffffff max_cycles: 0xa9210e89c, max_idle_ns: 440795203878 ns [ 0.008944] clocksource: timebase mult[15d17460] shift[24] registered [ 0.014079] clockevent: decrementer mult[bbbbbba] shift[32] cpu[0] [ 0.018750] Console: colour dummy device 80x25 [ 0.021832] pid_max: default: 32768 minimum: 301 [ 0.025363] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.031553] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.039224] e6500 family performance monitor hardware support registered [ 0.044587] rcu: Hierarchical SRCU implementation. [ 0.048540] smp: Bringing up secondary CPUs ... [ 4.961490] Processor 2 is stuck. [ 9.872983] Processor 3 is stuck. [ 14.784302] Processor 4 is stuck. [ 19.695729] Processor 5 is stuck. [ 24.607059] Processor 6 is stuck. [ 29.518496] Processor 7 is stuck. [ 34.429831] Processor 8 is stuck. [ 39.341233] Processor 9 is stuck. [ 44.252586] Processor 10 is stuck. [ 49.164063] Processor 11 is stuck. [ 54.075512] Processor 12 is stuck. [ 58.986907] Processor 13 is stuck. [ 63.898321] Processor 14 is stuck. [ 68.809721] Processor 15 is stuck. [ 73.721128] Processor 16 is stuck. [ 78.632517] Processor 17 is stuck. [ 83.543916] Processor 18 is stuck. [ 88.455324] Processor 19 is stuck. [ 93.366712] Processor 20 is stuck. [ 98.278111] Processor 21 is stuck. [ 103.189490] Processor 22 is stuck. [ 108.100890] Processor 23 is stuck. [ 108.102924] smp: Brought up 1 node, 2 CPUs [ 108.105671] Using standard scheduler topology [ 108.109270] devtmpfs: initialized [ 108.118401] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 108.126769] futex hash table entries: 8192 (order: 7, 524288 bytes, linear) [ 108.132956] NET: Registered protocol family 16 [ 108.136218] audit: initializing netlink subsys (disabled) [ 108.140280] audit: type=2000 audit(108.036:1): state=initialized audit_enabled=0 res=1 [ 108.166744] Machine: fsl,T4240RDB [ 108.168666] SoC family: QorIQ T4240 [ 108.170832] SoC ID: svr:0x82480020, Revision: 2.0 [ 108.177249] OF: Can't handle multiple dma-ranges with different offsets on node(/pcie@ffe240000) [ 108.184647] OF: Can't handle multiple dma-ranges with different offsets on node(/pcie@ffe240000) [ 108.192110] fsl-pci ffe240000.pcie: Invalid size 0xfffff9 for dma-range [ 108.197445] Found FSL PCI host bridge at 0x0000000ffe240000. Firmware bus number: 0->1 [ 108.204005] PCI host bridge /pcie@ffe240000 ranges: [ 108.207652] MEM 0x0000000c00000000..0x0000000c1fffffff -> 0x00000000e0000000 [ 108.213558] IO 0x0000000ff8000000..0x0000000ff800ffff -> 0x0000000000000000 [ 108.219436] /pcie@ffe240000: PCICSRBAR @ 0xdf000007 [ 108.222930] setup_pci_atmu: end of DRAM 180000000 [ 108.226328] /pcie@ffe240000: Setup 64-bit PCI DMA window [ 108.230313] /pcie@ffe240000: DMA window size is 0xdf000007 [ 108.234723] OF: Can't handle multiple dma-ranges with different offsets on node(/pcie@ffe260000) [ 108.242117] OF: Can't handle multiple dma-ranges with different offsets on node(/pcie@ffe260000) [ 108.249582] fsl-pci ffe260000.pcie: Invalid size 0xfffff9 for dma-range [ 108.254908] Found FSL PCI host bridge at 0x0000000ffe260000. Firmware bus number: 0->0 [ 108.261479] PCI host bridge /pcie@ffe260000 ranges: [ 108.265126] MEM 0x0000000c40000000..0x0000000c5fffffff -> 0x00000000e0000000 [ 108.271031] IO 0x0000000ff8020000..0x0000000ff802ffff -> 0x0000000000000000 [ 108.276867] /pcie@ffe260000: PCICSRBAR @ 0xdf000007 [ 108.280404] setup_pci_atmu: end of DRAM 180000000 [ 108.283804] /pcie@ffe260000: Setup 64-bit PCI DMA window [ 108.287786] /pcie@ffe260000: DMA window size is 0xdf000007 [ 108.292195] OF: Can't handle multiple dma-ranges with different offsets on node(/pcie@ffe270000) [ 108.299589] OF: Can't handle multiple dma-ranges with different offsets on node(/pcie@ffe270000) [ 108.307053] fsl-pci ffe270000.pcie: Invalid size 0xfffff9 for dma-range [ 108.312381] Found FSL PCI host bridge at 0x0000000ffe270000. Firmware bus number: 0->0 [ 108.318950] PCI host bridge /pcie@ffe270000 ranges: [ 108.322597] MEM 0x0000000c60000000..0x0000000c7fffffff -> 0x00000000e0000000 [ 108.328503] IO 0x0000000ff8030000..0x0000000ff803ffff -> 0x0000000000000000 [ 108.334339] /pcie@ffe270000: PCICSRBAR @ 0xdf000007 [ 108.337875] setup_pci_atmu: end of DRAM 180000000 [ 108.341273] /pcie@ffe270000: Setup 64-bit PCI DMA window [ 108.345258] /pcie@ffe270000: DMA window size is 0xdf000007 [ 108.351988] platform ff6000000.qman-portal: Adding to iommu group 0 [ 108.356886] platform ff6004000.qman-portal: Adding to iommu group 1 [ 108.361828] platform ff6008000.qman-portal: Adding to iommu group 2 [ 108.366779] platform ff600c000.qman-portal: Adding to iommu group 3 [ 108.371727] platform ff6010000.qman-portal: Adding to iommu group 4 [ 108.376675] platform ff6014000.qman-portal: Adding to iommu group 5 [ 108.381624] platform ff6018000.qman-portal: Adding to iommu group 6 [ 108.386577] platform ff601c000.qman-portal: Adding to iommu group 7 [ 108.391527] platform ff6020000.qman-portal: Adding to iommu group 8 [ 108.396474] platform ff6024000.qman-portal: Adding to iommu group 9 [ 108.401424] platform ff6028000.qman-portal: Adding to iommu group 10 [ 108.406460] platform ff602c000.qman-portal: Adding to iommu group 11 [ 108.411499] platform ff6030000.qman-portal: Adding to iommu group 12 [ 108.416537] platform ff6034000.qman-portal: Adding to iommu group 13 [ 108.421570] platform ff6038000.qman-portal: Adding to iommu group 14 [ 108.426606] platform ff603c000.qman-portal: Adding to iommu group 15 [ 108.431645] platform ff6040000.qman-portal: Adding to iommu group 16 [ 108.436681] platform ff6044000.qman-portal: Adding to iommu group 17 [ 108.441715] platform ff6048000.qman-portal: Adding to iommu group 18 [ 108.446752] platform ff604c000.qman-portal: Adding to iommu group 19 [ 108.451791] platform ff6050000.qman-portal: Adding to iommu group 20 [ 108.456826] platform ff6054000.qman-portal: Adding to iommu group 21 [ 108.461861] platform ff6058000.qman-portal: Adding to iommu group 22 [ 108.466899] platform ff605c000.qman-portal: Adding to iommu group 23 [ 108.471939] platform ff6060000.qman-portal: Adding to iommu group 24 [ 108.476971] platform ff6064000.qman-portal: Adding to iommu group 25 [ 108.482008] platform ff6068000.qman-portal: Adding to iommu group 26 [ 108.487046] platform ff606c000.qman-portal: Adding to iommu group 27 [ 108.492083] platform ff6070000.qman-portal: Adding to iommu group 28 [ 108.497118] platform ff6074000.qman-portal: Adding to iommu group 29 [ 108.502156] platform ff6078000.qman-portal: Adding to iommu group 30 [ 108.507191] platform ff607c000.qman-portal: Adding to iommu group 31 [ 108.512229] platform ff6080000.qman-portal: Adding to iommu group 32 [ 108.517265] platform ff6084000.qman-portal: Adding to iommu group 33 [ 108.522301] platform ff6088000.qman-portal: Adding to iommu group 34 [ 108.527337] platform ff608c000.qman-portal: Adding to iommu group 35 [ 108.532375] platform ff6090000.qman-portal: Adding to iommu group 36 [ 108.537410] platform ff6094000.qman-portal: Adding to iommu group 37 [ 108.542446] platform ff6098000.qman-portal: Adding to iommu group 38 [ 108.547483] platform ff609c000.qman-portal: Adding to iommu group 39 [ 108.552521] platform ff60a0000.qman-portal: Adding to iommu group 40 [ 108.557555] platform ff60a4000.qman-portal: Adding to iommu group 41 [ 108.562592] platform ff60a8000.qman-portal: Adding to iommu group 42 [ 108.567629] platform ff60ac000.qman-portal: Adding to iommu group 43 [ 108.572669] platform ff60b0000.qman-portal: Adding to iommu group 44 [ 108.577702] platform ff60b4000.qman-portal: Adding to iommu group 45 [ 108.582738] platform ff60b8000.qman-portal: Adding to iommu group 46 [ 108.587777] platform ff60bc000.qman-portal: Adding to iommu group 47 [ 108.592813] platform ff60c0000.qman-portal: Adding to iommu group 48 [ 108.597849] platform ff60c4000.qman-portal: Adding to iommu group 49 [ 108.602920] platform ffe488000.port: Adding to iommu group 50 [ 108.607318] platform ffe489000.port: Adding to iommu group 51 [ 108.611746] platform ffe48a000.port: Adding to iommu group 52 [ 108.616173] platform ffe48b000.port: Adding to iommu group 53 [ 108.620602] platform ffe48c000.port: Adding to iommu group 54 [ 108.625030] platform ffe48d000.port: Adding to iommu group 55 [ 108.629460] platform ffe490000.port: Adding to iommu group 56 [ 108.633887] platform ffe491000.port: Adding to iommu group 57 [ 108.638343] platform ffe588000.port: Adding to iommu group 58 [ 108.642745] platform ffe589000.port: Adding to iommu group 59 [ 108.647174] platform ffe58a000.port: Adding to iommu group 60 [ 108.651602] platform ffe58b000.port: Adding to iommu group 61 [ 108.656032] platform ffe58c000.port: Adding to iommu group 62 [ 108.660459] platform ffe58d000.port: Adding to iommu group 63 [ 108.664890] platform ffe590000.port: Adding to iommu group 64 [ 108.669319] platform ffe591000.port: Adding to iommu group 65 [ 108.673744] platform ffe114000.sdhc: Adding to iommu group 66 [ 108.678191] platform ffe100300.dma: Adding to iommu group 67 [ 108.682515] platform ffe101300.dma: Adding to iommu group 68 [ 108.686868] platform ffe210000.usb: Adding to iommu group 69 [ 108.691199] platform ffe211000.usb: Adding to iommu group 70 [ 108.695538] platform ffe220000.sata: Adding to iommu group 71 [ 108.699968] platform ffe221000.sata: Adding to iommu group 72 [ 108.704400] platform ffe316000.pme: Adding to iommu group 73 [ 108.708737] platform ffe318000.qman: Adding to iommu group 74 [ 108.713167] platform ffe31a000.bman: Adding to iommu group 75 [ 108.717600] fsl-pci ffe240000.pcie: Adding to iommu group 76 [ 108.721938] fsl-pci ffe260000.pcie: Adding to iommu group 77 [ 108.726279] fsl-pci ffe270000.pcie: Adding to iommu group 78 [ 108.764910] software IO TLB: mapped [mem 0x1145a000-0x1545a000] (64MB) [ 108.770049] PCI: Probing PCI hardware [ 108.772447] fsl-pci ffe240000.pcie: PCI host bridge to bus 0000:00 [ 108.777256] pci_bus 0000:00: root bus resource [io 0x8000080000010000-0x800008000001ffff] (bus address [0x0000-0xffff]) [ 108.786806] pci_bus 0000:00: root bus resource [mem 0xc00000000-0xc1fffffff] (bus address [0xe0000000-0xffffffff]) [ 108.795836] pci_bus 0000:00: root bus resource [bus 00-01] [ 108.800004] pci_bus 0000:00: busn_res: [bus 00-01] end is updated to ff [ 108.805319] pci 0000:00:00.0: [1957:0440] type 01 class 0x0b2000 [ 108.810014] pci 0000:00:00.0: reg 0x10: [io 0xdf000004-0xdf000007] [ 108.814948] pci 0000:00:00.0: reg 0x38: [mem 0xc00000000-0xc00ffffff pref] [ 108.820560] pci 0000:00:00.0: supports D1 D2 [ 108.823445] pci 0000:00:00.0: PME# supported from D0 D1 D2 D3hot [ 108.828237] fsl-pci ffe240000.pcie: Removing from iommu group 76 [ 108.832868] pci 0000:00:00.0: Adding to iommu group 79 [ 108.841338] pci 0000:01:00.0: [8086:10d3] type 00 class 0x020000 [ 108.845992] pci 0000:01:00.0: reg 0x10: [mem 0xc01000000-0xc0101ffff] [ 108.851086] pci 0000:01:00.0: reg 0x14: [mem 0xc01080000-0xc010fffff] [ 108.856209] pci 0000:01:00.0: reg 0x18: [io 0x8000080000011000-0x800008000001101f] [ 108.862548] pci 0000:01:00.0: reg 0x1c: [mem 0xc01100000-0xc01103fff] [ 108.867704] pci 0000:01:00.0: reg 0x30: [mem 0xc01140000-0xc0117ffff pref] [ 108.873343] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 108.878165] pci 0000:01:00.0: Adding to iommu group 79 [ 108.898576] pci 0000:00:00.0: PCI bridge to [bus 01-ff] [ 108.902408] pci 0000:00:00.0: bridge window [io 0x8000080000011000-0x8000080000011fff] [ 108.909268] pci 0000:00:00.0: bridge window [mem 0xc00000000-0xc011fffff] [ 108.914919] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 108.920209] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 01 [ 108.925555] fsl-pci ffe260000.pcie: PCI host bridge to bus 0001:00 [ 108.930369] pci_bus 0001:00: root bus resource [io 0x8000080000021000-0x8000080000030fff] (bus address [0x0000-0xffff]) [ 108.939924] pci_bus 0001:00: root bus resource [mem 0xc40000000-0xc5fffffff] (bus address [0xe0000000-0xffffffff]) [ 108.948951] pci_bus 0001:00: root bus resource [bus 00] [ 108.952855] pci_bus 0001:00: busn_res: [bus 00] end is updated to ff [ 108.957910] pci 0001:00:00.0: [1957:0440] type 01 class 0x0b2000 [ 108.962599] pci 0001:00:00.0: reg 0x10: [io 0xdf000004-0xdf000007] [ 108.967542] pci 0001:00:00.0: reg 0x38: [mem 0x00000000-0x00ffffff pref] [ 108.972964] pci 0001:00:00.0: supports D1 D2 [ 108.975866] pci 0001:00:00.0: PME# supported from D0 D1 D2 D3hot [ 108.980635] fsl-pci ffe260000.pcie: Removing from iommu group 77 [ 108.985263] pci 0001:00:00.0: Adding to iommu group 76 [ 108.993609] pci 0001:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 109.004762] pci 0001:00:00.0: PCI bridge to [bus 01-ff] [ 109.008596] pci 0001:00:00.0: bridge window [io 0x8000080000021000-0x8000080000021fff] [ 109.015454] pci 0001:00:00.0: bridge window [mem 0x00000000-0x000fffff] [ 109.020926] pci 0001:00:00.0: bridge window [mem 0x00000000-0x000fffff 64bit pref] [ 109.027357] pci_bus 0001:01: busn_res: [bus 01-ff] end is updated to 01 [ 109.032647] pci_bus 0001:00: busn_res: [bus 00-ff] end is updated to 01 [ 109.037991] fsl-pci ffe270000.pcie: PCI host bridge to bus 0002:00 [ 109.042807] pci_bus 0002:00: root bus resource [io 0x8000080000032000-0x8000080000041fff] (bus address [0x0000-0xffff]) [ 109.052359] pci_bus 0002:00: root bus resource [mem 0xc60000000-0xc7fffffff] (bus address [0xe0000000-0xffffffff]) [ 109.061388] pci_bus 0002:00: root bus resource [bus 00] [ 109.065293] pci_bus 0002:00: busn_res: [bus 00] end is updated to ff [ 109.070345] pci 0002:00:00.0: [1957:0440] type 01 class 0x0b2000 [ 109.075037] pci 0002:00:00.0: reg 0x10: [io 0xdf000004-0xdf000007] [ 109.079980] pci 0002:00:00.0: reg 0x38: [mem 0x00000000-0x00ffffff pref] [ 109.085402] pci 0002:00:00.0: supports D1 D2 [ 109.088304] pci 0002:00:00.0: PME# supported from D0 D1 D2 D3hot [ 109.093075] fsl-pci ffe270000.pcie: Removing from iommu group 78 [ 109.097702] pci 0002:00:00.0: Adding to iommu group 77 [ 109.106035] pci 0002:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 109.117184] pci 0002:00:00.0: PCI bridge to [bus 01-ff] [ 109.121017] pci 0002:00:00.0: bridge window [io 0x8000080000032000-0x8000080000032fff] [ 109.127876] pci 0002:00:00.0: bridge window [mem 0x00000000-0x000fffff] [ 109.133348] pci 0002:00:00.0: bridge window [mem 0x00000000-0x000fffff 64bit pref] [ 109.139779] pci_bus 0002:01: busn_res: [bus 01-ff] end is updated to 01 [ 109.145069] pci_bus 0002:00: busn_res: [bus 00-ff] end is updated to 01 [ 109.150369] PCI: Cannot allocate resource region 0 of device 0000:00:00.0, will remap [ 109.156876] PCI: Cannot allocate resource region 6 of device 0000:00:00.0, will remap [ 109.163397] PCI: Cannot allocate resource region 0 of device 0001:00:00.0, will remap [ 109.169904] PCI: Cannot allocate resource region 0 of device 0002:00:00.0, will remap [ 109.176424] PCI 0000:00 Cannot reserve Legacy IO [io 0x8000080000010000-0x10fff] [ 109.176427] PCI 0001:00 Cannot reserve Legacy IO [io 0x8000080000021000-0x21fff] [ 109.176429] PCI 0002:00 Cannot reserve Legacy IO [io 0x8000080000032000-0x32fff] [ 109.176440] pci 0000:00:00.0: BAR 6: no space for [mem size 0x01000000 pref] [ 109.182147] pci 0000:00:00.0: BAR 6: failed to assign [mem size 0x01000000 pref] [ 109.188226] pci 0000:00:00.0: BAR 0: no space for [io size 0x0004] [ 109.193176] pci 0000:00:00.0: BAR 0: failed to assign [io size 0x0004] [ 109.198473] pci 0000:00:00.0: PCI bridge to [bus 01] [ 109.202117] pci 0000:00:00.0: bridge window [io 0x8000080000010000-0x800008000001ffff] [ 109.208981] pci 0000:00:00.0: bridge window [mem 0xc00000000-0xc1fffffff] [ 109.214625] pci_bus 0000:00: Some PCI device resources are unassigned, try booting with pci=realloc [ 109.222352] pci_bus 0000:00: resource 4 [io 0x8000080000010000-0x800008000001ffff] [ 109.228691] pci_bus 0000:00: resource 5 [mem 0xc00000000-0xc1fffffff] [ 109.233814] pci_bus 0000:01: resource 0 [io 0x8000080000010000-0x800008000001ffff] [ 109.240153] pci_bus 0000:01: resource 1 [mem 0xc00000000-0xc1fffffff] [ 109.245279] pci 0001:00:00.0: BAR 6: no space for [mem size 0x01000000 pref] [ 109.251008] pci 0001:00:00.0: BAR 6: failed to assign [mem size 0x01000000 pref] [ 109.257087] pci 0001:00:00.0: BAR 0: no space for [io size 0x0004] [ 109.262036] pci 0001:00:00.0: BAR 0: failed to assign [io size 0x0004] [ 109.267333] pci 0001:00:00.0: PCI bridge to [bus 01] [ 109.270978] pci 0001:00:00.0: bridge window [io 0x8000080000021000-0x8000080000030fff] [ 109.277842] pci 0001:00:00.0: bridge window [mem 0xc40000000-0xc5fffffff] [ 109.283486] pci_bus 0001:00: Some PCI device resources are unassigned, try booting with pci=realloc [ 109.291214] pci_bus 0001:00: resource 4 [io 0x8000080000021000-0x8000080000030fff] [ 109.297554] pci_bus 0001:00: resource 5 [mem 0xc40000000-0xc5fffffff] [ 109.302676] pci_bus 0001:01: resource 0 [io 0x8000080000021000-0x8000080000030fff] [ 109.309015] pci_bus 0001:01: resource 1 [mem 0xc40000000-0xc5fffffff] [ 109.314140] pci 0002:00:00.0: BAR 6: no space for [mem size 0x01000000 pref] [ 109.319869] pci 0002:00:00.0: BAR 6: failed to assign [mem size 0x01000000 pref] [ 109.325948] pci 0002:00:00.0: BAR 0: no space for [io size 0x0004] [ 109.330897] pci 0002:00:00.0: BAR 0: failed to assign [io size 0x0004] [ 109.336195] pci 0002:00:00.0: PCI bridge to [bus 01] [ 109.339838] pci 0002:00:00.0: bridge window [io 0x8000080000032000-0x8000080000041fff] [ 109.346703] pci 0002:00:00.0: bridge window [mem 0xc60000000-0xc7fffffff] [ 109.352348] pci_bus 0002:00: Some PCI device resources are unassigned, try booting with pci=realloc [ 109.360074] pci_bus 0002:00: resource 4 [io 0x8000080000032000-0x8000080000041fff] [ 109.366413] pci_bus 0002:00: resource 5 [mem 0xc60000000-0xc7fffffff] [ 109.371537] pci_bus 0002:01: resource 0 [io 0x8000080000032000-0x8000080000041fff] [ 109.377876] pci_bus 0002:01: resource 1 [mem 0xc60000000-0xc7fffffff] [ 109.383056] PCI: Probing PCI hardware done [ 109.383569] Setting up Freescale MSI support [ 109.383936] Setting up Freescale MSI support [ 109.384295] Setting up Freescale MSI support [ 109.384660] Setting up Freescale MSI support [ 109.393666] HugeTLB registered 4.00 MiB page size, pre-allocated 0 pages [ 109.398983] HugeTLB registered 16.0 MiB page size, pre-allocated 0 pages [ 109.404365] HugeTLB registered 64.0 MiB page size, pre-allocated 0 pages [ 109.409742] HugeTLB registered 256 MiB page size, pre-allocated 0 pages [ 109.415039] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 109.424164] iommu: Default domain type: Translated [ 109.427708] vgaarb: loaded [ 109.429148] SCSI subsystem initialized [ 109.431659] libata version 3.00 loaded. [ 109.431785] usbcore: registered new interface driver usbfs [ 109.435898] usbcore: registered new interface driver hub [ 109.439955] usbcore: registered new device driver usb [ 109.443658] pps_core: LinuxPPS API ver. 1 registered [ 109.447258] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 109.455082] PTP clock support registered [ 109.457851] EDAC MC: Ver: 3.0.0 [ 109.460700] clocksource: Switched to clocksource timebase [ 109.710567] NET: Registered protocol family 2 [ 109.713985] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 109.721183] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 109.727979] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 109.734380] TCP: Hash tables configured (established 65536 bind 65536) [ 109.739615] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 109.745090] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 109.751134] NET: Registered protocol family 1 [ 109.754303] RPC: Registered named UNIX socket transport module. [ 109.758831] RPC: Registered udp transport module. [ 109.762214] RPC: Registered tcp transport module. [ 109.765602] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 109.770760] pci 0000:01:00.0: CLS mismatch (32 != 64), using 64 bytes [ 109.777400] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 109.783109] NFS: Registering the id_resolver key type [ 109.786778] Key type id_resolver registered [ 109.789630] Key type id_legacy registered [ 109.792332] ntfs: driver 2.1.32 [Flags: R/O]. [ 109.795394] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc. [ 109.815523] io scheduler mq-deadline registered [ 109.818662] io scheduler kyber registered [ 109.821456] OF: Can't handle multiple dma-ranges with different offsets on node(/pcie@ffe240000) [ 109.828855] OF: Can't handle multiple dma-ranges with different offsets on node(/pcie@ffe240000) [ 109.836319] pcieport 0000:00:00.0: Invalid size 0xfffff9 for dma-range [ 109.841688] pcieport 0000:00:00.0: AER: enabled with IRQ 20 [ 109.845986] OF: Can't handle multiple dma-ranges with different offsets on node(/pcie@ffe260000) [ 109.853382] OF: Can't handle multiple dma-ranges with different offsets on node(/pcie@ffe260000) [ 109.860845] pcieport 0001:00:00.0: Invalid size 0xfffff9 for dma-range [ 109.866203] pcieport 0001:00:00.0: AER: enabled with IRQ 22 [ 109.870485] OF: Can't handle multiple dma-ranges with different offsets on node(/pcie@ffe270000) [ 109.877880] OF: Can't handle multiple dma-ranges with different offsets on node(/pcie@ffe270000) [ 109.885343] pcieport 0002:00:00.0: Invalid size 0xfffff9 for dma-range [ 109.890696] pcieport 0002:00:00.0: AER: enabled with IRQ 23 [ 109.895997] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 109.901344] printk: console [ttyS0] disabled [ 109.904233] serial8250.0: ttyS0 at MMIO 0xffe11c500 (irq = 36, base_baud = 22916666) is a 16550A [ 109.911704] printk: console [ttyS0] enabled [ 109.917421] printk: bootconsole [udbg0] disabled [ 109.924167] serial8250.0: ttyS1 at MMIO 0xffe11c600 (irq = 36, base_baud = 22916666) is a 16550A [ 109.931796] serial8250.0: ttyS2 at MMIO 0xffe11d500 (irq = 37, base_baud = 22916666) is a 16550A [ 109.939427] serial8250.0: ttyS3 at MMIO 0xffe11d600 (irq = 37, base_baud = 22916666) is a 16550A [ 109.947077] ePAPR hypervisor byte channel driver [ 109.954200] brd: module loaded [ 109.962388] loop: module loaded [ 109.964250] st: Version 20160209, fixed bufsize 32768, s/g segs 256 [ 109.969931] fsl-sata ffe220000.sata: Sata FSL Platform/CSB Driver init [ 109.975448] scsi host0: sata_fsl [ 109.977470] ata1: SATA max UDMA/133 irq 68 [ 109.980307] fsl-sata ffe221000.sata: Sata FSL Platform/CSB Driver init [ 109.985759] scsi host1: sata_fsl [ 109.987745] ata2: SATA max UDMA/133 irq 69 [ 109.991308] fsl_espi ffe110000.spi: cs=0, init_csmode=0x100008 [ 109.996085] spi-nor spi0.0: unrecognized JEDEC id bytes: ff ff ff ff ff ff [ 110.001666] fsl_espi ffe110000.spi: at 0x(____ptrval____) (irq = 53) [ 110.007869] libphy: Fixed MDIO Bus: probed [ 110.011211] libphy: Freescale XGMAC MDIO Bus: probed [ 110.015080] libphy: Freescale XGMAC MDIO Bus: probed [ 110.018943] libphy: Freescale XGMAC MDIO Bus: probed [ 110.022812] libphy: Freescale XGMAC MDIO Bus: probed [ 110.026678] libphy: Freescale XGMAC MDIO Bus: probed [ 110.030548] libphy: Freescale XGMAC MDIO Bus: probed [ 110.034415] libphy: Freescale XGMAC MDIO Bus: probed [ 110.038272] libphy: Freescale XGMAC MDIO Bus: probed [ 110.042130] libphy: Freescale XGMAC MDIO Bus: probed [ 110.048770] libphy: Freescale XGMAC MDIO Bus: probed [ 110.058922] libphy: Freescale XGMAC MDIO Bus: probed [ 110.062781] libphy: Freescale XGMAC MDIO Bus: probed [ 110.066639] libphy: Freescale XGMAC MDIO Bus: probed [ 110.070499] libphy: Freescale XGMAC MDIO Bus: probed [ 110.074355] libphy: Freescale XGMAC MDIO Bus: probed [ 110.078212] libphy: Freescale XGMAC MDIO Bus: probed [ 110.082073] libphy: Freescale XGMAC MDIO Bus: probed [ 110.085943] libphy: Freescale XGMAC MDIO Bus: probed [ 110.089719] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 110.094244] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 110.098881] OF: Can't handle multiple dma-ranges with different offsets on node(/pcie@ffe240000) [ 110.106364] OF: Can't handle multiple dma-ranges with different offsets on node(/pcie@ffe240000) [ 110.113844] e1000e 0000:01:00.0: Invalid size 0xfffff9 for dma-range [ 110.119049] e1000e 0000:01:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 110.173151] e1000e 0000:01:00.0 0000:01:00.0 (uninitialized): registered PHC clock [ 110.230696] e1000e 0000:01:00.0 eth0: (PCI Express:2.5GT/s:Width x1) 68:05:ca:2e:24:a8 [ 110.237311] e1000e 0000:01:00.0 eth0: Intel(R) PRO/1000 Network Connection [ 110.242892] e1000e 0000:01:00.0 eth0: MAC: 3, PHY: 8, PBA No: E46981-008 [ 110.248350] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 110.253892] ehci-pci: EHCI PCI platform driver [ 110.257475] ehci-fsl: Freescale EHCI Host controller driver [ 110.261834] fsl-ehci fsl-ehci.0: Freescale On-Chip EHCI Host Controller [ 110.267153] fsl-ehci fsl-ehci.0: new USB bus registered, assigned bus number 1 [ 110.282931] fsl-ehci fsl-ehci.0: irq 44, io mem 0xffe210000 [ 110.300705] fsl-ehci fsl-ehci.0: USB 2.0 started, EHCI 1.00 [ 110.305249] hub 1-0:1.0: USB hub found [ 110.307702] hub 1-0:1.0: 1 port detected [ 110.310464] fsl-ehci fsl-ehci.1: Freescale On-Chip EHCI Host Controller [ 110.315783] fsl-ehci fsl-ehci.1: new USB bus registered, assigned bus number 2 [ 110.331547] fsl-ehci fsl-ehci.1: irq 45, io mem 0xffe211000 [ 110.348699] fsl-ehci fsl-ehci.1: USB 2.0 started, EHCI 1.00 [ 110.353215] hub 2-0:1.0: USB hub found [ 110.355667] hub 2-0:1.0: 1 port detected [ 110.358489] usbcore: registered new interface driver usb-storage [ 110.364395] i2c /dev entries driver [ 110.366998] mpc-i2c ffe118000.i2c: timeout 1000000 us [ 110.375814] rtc-ds1374 0-0068: registered as rtc0 [ 110.379883] rtc-ds1374 0-0068: setting system clock to 1970-01-01T00:04:57 UTC (297) [ 110.386680] mpc-i2c ffe118100.i2c: timeout 1000000 us [ 110.390570] mpc-i2c ffe119000.i2c: timeout 1000000 us [ 110.394452] mpc-i2c ffe119100.i2c: timeout 1000000 us [ 110.402034] hwmon_vid: Unknown VRM version of your CPU [ 110.406051] w83793 0-002f: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info(). [ 110.418175] w83793 0-002f: Registered watchdog chardev major 10, minor: 130 [ 110.423944] Freescale(R) MPC85xx EDAC driver, (C) 2006 Montavista Software [ 110.430923] EDAC MC0: Giving out device to module fsl_ddr_edac controller fsl_mc_err: DEV fsl_mc_err (INTERRUPT) [ 110.439809] fsl_ddr_edac acquired irq 490 for MC [ 110.443117] fsl_ddr_edac MC err registered [ 110.446008] EDAC MC1: Giving out device to module fsl_ddr_edac controller fsl_mc_err: DEV fsl_mc_err (INTERRUPT) [ 110.454893] fsl_ddr_edac acquired irq 489 for MC [ 110.458201] fsl_ddr_edac MC err registered [ 110.461091] EDAC MC2: Giving out device to module fsl_ddr_edac controller fsl_mc_err: DEV fsl_mc_err (INTERRUPT) [ 110.469976] fsl_ddr_edac acquired irq 488 for MC [ 110.473286] fsl_ddr_edac MC err registered [ 110.477997] EDAC PCI0: Giving out device to module MPC85xx_edac controller mpc85xx_pci_err: DEV mpc85xx-pci-edac.0.auto (INTERRUPT) [ 110.480814] ata1: No Device OR PHYRDY change,Hstatus = 0xa0000000 [ 110.488525] MPC85xx_edac acquired irq 20 for PCI Err [ 110.493309] ata1: SATA link down (SStatus 10 SControl 300) [ 110.496955] MPC85xx_edac PCI err registered [ 110.501150] ata2: No Device OR PHYRDY change,Hstatus = 0xa0000000 [ 110.504041] EDAC PCI1: Giving out device to module MPC85xx_edac controller mpc85xx_pci_err: DEV mpc85xx-pci-edac.1.auto (INTERRUPT) [ 110.508791] ata2: SATA link down (SStatus 10 SControl 300) [ 110.519308] MPC85xx_edac acquired irq 22 for PCI Err [ 110.527127] MPC85xx_edac PCI err registered [ 110.530046] EDAC PCI2: Giving out device to module MPC85xx_edac controller mpc85xx_pci_err: DEV mpc85xx-pci-edac.2.auto (INTERRUPT) [ 110.540574] MPC85xx_edac acquired irq 23 for PCI Err [ 110.544230] MPC85xx_edac PCI err registered [ 110.547545] sdhci: Secure Digital Host Controller Interface driver [ 110.552417] sdhci: Copyright(c) Pierre Ossman [ 110.555464] sdhci-pltfm: SDHCI platform and OF driver helper [ 110.585880] mmc0: SDHCI controller on ffe114000.sdhc [ffe114000.sdhc] using ADMA [ 110.592744] caam ffe300000.crypto: RNG4 SH0 was previously instantiated without prediction resistance. Tearing it down [ 110.602143] caam ffe300000.crypto: Deinstantiated RNG4 SH0 [ 110.606326] caam ffe300000.crypto: Instantiated RNG4 SH0 [ 110.628202] caam ffe300000.crypto: Instantiated RNG4 SH1 [ 110.632209] caam ffe300000.crypto: device ID = 0x0a1c020000000000 (Era 6) [ 110.637690] caam ffe300000.crypto: job rings = 4, qi = 1 [ 110.641822] platform ffe301000.jr: Adding to iommu group 78 [ 110.646261] platform ffe302000.jr: Adding to iommu group 80 [ 110.650681] platform ffe303000.jr: Adding to iommu group 81 [ 110.655102] platform ffe304000.jr: Adding to iommu group 82 [ 110.670179] caam algorithms registered in /proc/crypto [ 110.675861] caam ffe300000.crypto: caam pkc algorithms registered in /proc/crypto [ 110.682046] caam ffe300000.crypto: registering rng-caam [ 110.686575] usbcore: registered new interface driver usbhid [ 110.690851] usbhid: USB HID core driver [ 110.693378] Freescale hypervisor management driver [ 110.696865] fsl-hv: no hypervisor found [ 110.699548] ipip: IPv4 and MPLS over IPv4 tunneling driver [ 110.703975] Initializing XFRM netlink socket [ 110.707032] NET: Registered protocol family 10 [ 110.710655] Segment Routing with IPv6 [ 110.713521] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 110.718383] NET: Registered protocol family 17 [ 110.721525] NET: Registered protocol family 15 [ 110.724675] 8021q: 802.1Q VLAN Support v1.8 [ 110.727566] Key type dns_resolver registered [ 110.730593] drmem: No dynamic reconfiguration memory found [ 110.773502] random: fast init done [ 110.802913] 8021q: adding VLAN 0 to HW filter on device eth0 [ 110.817272] random: crng init done [ 113.993688] e1000e 0000:01:00.0 eth0: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [ 114.008711] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 114.028706] IP-Config: Complete: [ 114.030624] device=eth0, hwaddr=68:05:ca:2e:24:a8, ipaddr=10.1.2.2, mask=255.255.0.0, gw=10.1.1.1 [ 114.038628] host=t4240rdb, domain=, nis-domain=(none) [ 114.042805] bootserver=10.1.2.1, rootserver=10.1.2.1, rootpath= [ 114.048141] md: Skipping autodetection of RAID arrays. (raid=autodetect will force) [ 114.060967] VFS: Mounted root (nfs filesystem) on device 0:18. [ 114.065743] devtmpfs: mounted [ 114.068395] Freeing unused kernel memory: 4112K [ 114.071661] This architecture does not have kernel memory protection. [ 114.076794] Run /sbin/init as init process [ 114.079577] with arguments: [ 114.079578] /sbin/init [ 114.079579] with environment: [ 114.079580] HOME=/ [ 114.079581] TERM=linux [ 115.315377] systemd[1]: System time before build time, advancing clock. [ 115.350215] systemd[1]: Failed to lookup module alias 'autofs4': Function not implemented [ 115.380593] systemd[1]: systemd 240 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 115.401073] systemd[1]: Detected architecture ppc64. [ 115.429616] systemd[1]: Set hostname to . [ 115.455850] systemd[1]: Failed to bump fs.file-max, ignoring: Invalid argument [ 115.861866] systemd[1]: File /lib/systemd/system/systemd-journald.service:12 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling. [ 115.877607] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.) [ 116.029117] systemd[1]: /lib/systemd/system/fancontrol.service:9: PIDFile= references path below legacy directory /var/run/, updating /var/run/fancontrol.pid → /run/fancontrol.pid; please update the unit file accordingly. [ 116.080232] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 116.100793] systemd[1]: Reached target Remote File Systems. [ 116.120751] systemd[1]: Reached target Swap. [ 116.774505] systemd-journald[1440]: Received request to flush runtime journal from PID 1 [ 117.323688] pcieport 0000:00:00.0: AER: Corrected error received: 0000:01:00.0 [ 117.329694] e1000e 0000:01:00.0: AER: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID) [ 117.338582] e1000e 0000:01:00.0: AER: device [8086:10d3] error status/mask=00001000/00002000 [ 117.345919] e1000e 0000:01:00.0: AER: [12] Timeout [ 119.035056] pcieport 0000:00:00.0: AER: Corrected error received: 0000:01:00.0 [ 119.042196] e1000e 0000:01:00.0: AER: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID) [ 119.052409] e1000e 0000:01:00.0: AER: device [8086:10d3] error status/mask=00001000/00002000 [ 119.061092] e1000e 0000:01:00.0: AER: [12] Timeout [ 119.066684] pcieport 0000:00:00.0: AER: Corrected error received: 0000:01:00.0 [ 119.262731] pcieport 0000:00:00.0: AER: Corrected error received: 0000:01:00.0 [ 119.268724] e1000e 0000:01:00.0: AER: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID) [ 119.277619] e1000e 0000:01:00.0: AER: device [8086:10d3] error status/mask=00001000/00002000 [ 119.284953] e1000e 0000:01:00.0: AER: [12] Timeout [ 119.486153] pcieport 0000:00:00.0: AER: Corrected error received: 0000:01:00.0 [ 119.492124] e1000e 0000:01:00.0: AER: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID) [ 119.501054] e1000e 0000:01:00.0: AER: device [8086:10d3] error status/mask=00001000/00002000 [ 119.508399] e1000e 0000:01:00.0: AER: [12] Timeout [ 142.345527] pcieport 0000:00:00.0: AER: Corrected error received: 0000:01:00.0 [ 142.351469] e1000e 0000:01:00.0: AER: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID) [ 142.360359] e1000e 0000:01:00.0: AER: device [8086:10d3] error status/mask=00001000/00002000 [ 142.367684] e1000e 0000:01:00.0: AER: [12] Timeout