Re: [PATCH V2 6/8] phy: tegra: xusb: Add support for charger detect

From: Thierry Reding
Date: Tue Apr 28 2020 - 06:55:16 EST

Next message: Cristian Ciocaltea: "[PATCH 1/1] dma: actions: Fix lockdep splat for owl-dma"
Previous message: Masahiro Yamada: "BPFilter: bit size mismatch between bpfiter_umh and vmliux"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

On Wed, Apr 15, 2020 at 01:55:06PM +0530, Nagarjuna Kristam wrote:
> Perform charger-detect operation if corresponding dt property is enabled.
> Update usb-phy with the detected charger state and max current values.
> Register charger-detect API's of usb-phy to provide needed functionalities.
>
> Signed-off-by: Nagarjuna Kristam <nkristam@xxxxxxxxxx>
> ---
> V2:
> - Patch re-based.
> ---
> drivers/phy/tegra/Makefile | 2 +-
> drivers/phy/tegra/xusb-tegra-cd.c | 300 ++++++++++++++++++++++++++++++++++++++
> drivers/phy/tegra/xusb.c | 80 ++++++++++
> drivers/phy/tegra/xusb.h | 7 +
> 4 files changed, 388 insertions(+), 1 deletion(-)
> create mode 100644 drivers/phy/tegra/xusb-tegra-cd.c

Looks mostly good to me, just a few small nits.

>
> diff --git a/drivers/phy/tegra/Makefile b/drivers/phy/tegra/Makefile
> index 89b8406..25ea9a9 100644
> --- a/drivers/phy/tegra/Makefile
> +++ b/drivers/phy/tegra/Makefile
> @@ -1,7 +1,7 @@
> # SPDX-License-Identifier: GPL-2.0-only
> obj-$(CONFIG_PHY_TEGRA_XUSB) += phy-tegra-xusb.o
>
> -phy-tegra-xusb-y += xusb.o
> +phy-tegra-xusb-y += xusb.o xusb-tegra-cd.o

Splitting this off into a separate file seems a little arbitrary. If
adding this to xusb.c is really making things too unwieldy, I'd suggest
a different name. Perhaps something like xusb-charger.c, or just cd.c.
This is already in a directory called "tegra" and it's obvious also that
this is part of the XUSB PHY driver.

> phy-tegra-xusb-$(CONFIG_ARCH_TEGRA_124_SOC) += xusb-tegra124.o
> phy-tegra-xusb-$(CONFIG_ARCH_TEGRA_132_SOC) += xusb-tegra124.o
> phy-tegra-xusb-$(CONFIG_ARCH_TEGRA_210_SOC) += xusb-tegra210.o
> diff --git a/drivers/phy/tegra/xusb-tegra-cd.c b/drivers/phy/tegra/xusb-tegra-cd.c
> new file mode 100644
> index 0000000..0fafc68
> --- /dev/null
> +++ b/drivers/phy/tegra/xusb-tegra-cd.c
> @@ -0,0 +1,300 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (c) 2020, NVIDIA CORPORATION. All rights reserved.
> + */
> +
> +#include <linux/delay.h>
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +#include <linux/phy/phy.h>
> +
> +#include "xusb.h"
> +
> +/* Data contact detection timeout */
> +#define TDCD_TIMEOUT_MS 400
> +
> +#define USB2_BATTERY_CHRG_OTGPADX_CTL0(x) (0x80 + (x) * 0x40)
> +#define PD_CHG (1 << 0)
> +#define VDCD_DET_FILTER_EN (1 << 4)
> +#define VDAT_DET (1 << 5)
> +#define VDAT_DET_FILTER_EN (1 << 8)
> +#define OP_SINK_EN (1 << 9)
> +#define OP_SRC_EN (1 << 10)
> +#define ON_SINK_EN (1 << 11)
> +#define ON_SRC_EN (1 << 12)
> +#define OP_I_SRC_EN (1 << 13)
> +#define ZIP_FILTER_EN (1 << 21)
> +#define ZIN_FILTER_EN (1 << 25)
> +#define DCD_DETECTED (1 << 26)
> +
> +#define USB2_BATTERY_CHRG_OTGPADX_CTL1(x) (0x84 + (x) * 0x40)
> +#define PD_VREG (1 << 6)
> +#define VREG_LEV(x) (((x) & 0x3) << 7)
> +#define VREG_DIR(x) (((x) & 0x3) << 11)
> +#define VREG_DIR_IN VREG_DIR(1)
> +#define VREG_DIR_OUT VREG_DIR(2)
> +#define USBOP_RPD_OVRD (1 << 16)
> +#define USBOP_RPD_OVRD_VAL (1 << 17)
> +#define USBOP_RPU_OVRD (1 << 18)
> +#define USBOP_RPU_OVRD_VAL (1 << 19)
> +#define USBON_RPD_OVRD (1 << 20)
> +#define USBON_RPD_OVRD_VAL (1 << 21)
> +#define USBON_RPU_OVRD (1 << 22)
> +#define USBON_RPU_OVRD_VAL (1 << 23)
> +
> +#define XUSB_PADCTL_USB2_OTG_PADX_CTL0(x) (0x88 + (x) * 0x40)

There's a bit of a mix of spaces and tabs for indentation here. Just
pick one and stick with it. I think checkpatch will want you to use tabs
first and then spaces if additional indentation is needed.

> +#define USB2_OTG_PD2 (1 << 27)
> +#define USB2_OTG_PD2_OVRD_EN (1 << 28)
> +#define USB2_OTG_PD_ZI (1 << 29)
> +
> +#define XUSB_PADCTL_USB2_BATTERY_CHRG_TDCD_DBNC_TIMER_0 (0x280)
> +#define TDCD_DBNC(x) (((x) & 0x7ff) << 0)
> +
> +static void tegra_xusb_padctl_set_debounce_time(
> + struct tegra_xusb_padctl *padctl, u32 val)

Perhaps rename "val" to something like "debounce", or "delay" or
something to avoid the "val" vs. "value" confusion. Also, wrapping
should be after the return type. Same for most functions below.

> +{
> + u32 value;
> +
> + value = padctl_readl(padctl,
> + XUSB_PADCTL_USB2_BATTERY_CHRG_TDCD_DBNC_TIMER_0);
> + value &= ~(TDCD_DBNC(0));
> + value |= TDCD_DBNC(val);
> + padctl_writel(padctl, value,
> + XUSB_PADCTL_USB2_BATTERY_CHRG_TDCD_DBNC_TIMER_0);
> +}
> +
> +static void tegra_xusb_padctl_utmi_pad_charger_detect_on(
> + struct tegra_xusb_padctl *padctl, u32 index)

In general these function names are a little long for my taste. Charger
detection can only happen on UTMI pads, right? So could we just drop the
_utmi_pad infix in these? That doesn't give us much, but at least it
should make splitting this across multiple lines less awkward.

> +{
> + u32 value;
> +
> + value = padctl_readl(padctl, XUSB_PADCTL_USB2_OTG_PADX_CTL0(index));
> + value &= ~USB2_OTG_PD_ZI;
> + padctl_writel(padctl, value, XUSB_PADCTL_USB2_OTG_PADX_CTL0(index));
> +
> + value = padctl_readl(padctl, XUSB_PADCTL_USB2_OTG_PADX_CTL0(index));
> + value |= (USB2_OTG_PD2 | USB2_OTG_PD2_OVRD_EN);
> + padctl_writel(padctl, value, XUSB_PADCTL_USB2_OTG_PADX_CTL0(index));
> +
> + value = padctl_readl(padctl, USB2_BATTERY_CHRG_OTGPADX_CTL0(index));
> + value &= ~PD_CHG;
> + padctl_writel(padctl, value, USB2_BATTERY_CHRG_OTGPADX_CTL0(index));
> +
> + /* Set DP/DN Pull up/down to zero by default */
> + value = padctl_readl(padctl, USB2_BATTERY_CHRG_OTGPADX_CTL1(index));
> + value &= ~(USBOP_RPD_OVRD_VAL | USBOP_RPU_OVRD_VAL |
> + USBON_RPD_OVRD_VAL | USBON_RPU_OVRD_VAL);
> + value |= (USBOP_RPD_OVRD | USBOP_RPU_OVRD |
> + USBON_RPD_OVRD | USBON_RPU_OVRD);
> + padctl_writel(padctl, value, USB2_BATTERY_CHRG_OTGPADX_CTL1(index));
> +
> + /* Disable DP/DN as src/sink */
> + value = padctl_readl(padctl, USB2_BATTERY_CHRG_OTGPADX_CTL0(index));
> + value &= ~(OP_SRC_EN | ON_SINK_EN |
> + ON_SRC_EN | OP_SINK_EN);
> + padctl_writel(padctl, value, USB2_BATTERY_CHRG_OTGPADX_CTL0(index));
> +}
> +
> +static void tegra_xusb_padctl_utmi_pad_charger_detect_off(
> + struct tegra_xusb_padctl *padctl, u32 index)
> +{
> + u32 value;
> +
> + value = padctl_readl(padctl, USB2_BATTERY_CHRG_OTGPADX_CTL1(index));
> + value &= ~(USBOP_RPD_OVRD | USBOP_RPU_OVRD |
> + USBON_RPD_OVRD | USBON_RPU_OVRD);
> + padctl_writel(padctl, value, USB2_BATTERY_CHRG_OTGPADX_CTL1(index));
> +
> + /* power down necessary stuff */
> + value = padctl_readl(padctl, USB2_BATTERY_CHRG_OTGPADX_CTL0(index));
> + value |= PD_CHG;
> + padctl_writel(padctl, value, USB2_BATTERY_CHRG_OTGPADX_CTL0(index));
> +
> + value = padctl_readl(padctl, XUSB_PADCTL_USB2_OTG_PADX_CTL0(index));
> + value &= ~(USB2_OTG_PD2 | USB2_OTG_PD2_OVRD_EN);
> + padctl_writel(padctl, value, XUSB_PADCTL_USB2_OTG_PADX_CTL0(index));
> +}
> +
> +
> +static void tegra_xusb_padctl_detect_filters(
> + struct tegra_xusb_padctl *padctl, u32 index,
> + bool on)
> +{
> + u32 value;
> +
> + if (on) {
> + value = padctl_readl(padctl,
> + USB2_BATTERY_CHRG_OTGPADX_CTL0(index));
> + value |= (VDCD_DET_FILTER_EN | VDAT_DET_FILTER_EN |
> + ZIP_FILTER_EN | ZIN_FILTER_EN);
> + padctl_writel(padctl, value,
> + USB2_BATTERY_CHRG_OTGPADX_CTL0(index));
> + } else {
> + value = padctl_readl(padctl,
> + USB2_BATTERY_CHRG_OTGPADX_CTL0(index));
> + value &= ~(VDCD_DET_FILTER_EN | VDAT_DET_FILTER_EN |
> + ZIP_FILTER_EN | ZIN_FILTER_EN);
> + padctl_writel(padctl, value,
> + USB2_BATTERY_CHRG_OTGPADX_CTL0(index));
> + }
> +}
> +
> +static void tegra_xusb_padctl_utmi_pad_dcd(struct tegra_xusb_padctl *padctl,
> + u32 index)
> +{
> + u32 value;
> + int dcd_timeout_ms = 0;
> + bool ret = false;
> +
> + /* Turn on IDP_SRC */
> + value = padctl_readl(padctl, USB2_BATTERY_CHRG_OTGPADX_CTL0(index));
> + value |= OP_I_SRC_EN;
> + padctl_writel(padctl, value, USB2_BATTERY_CHRG_OTGPADX_CTL0(index));
> +
> + /* Turn on D- pull-down resistor */
> + value = padctl_readl(padctl, USB2_BATTERY_CHRG_OTGPADX_CTL1(index));
> + value |= USBON_RPD_OVRD_VAL;
> + padctl_writel(padctl, value, USB2_BATTERY_CHRG_OTGPADX_CTL1(index));
> +
> + /* Wait for TDCD_DBNC */
> + usleep_range(10000, 120000);

From the comment this looks like we're waiting for some hardware
condition. Can we somehow obtain this rather than implementing a fixed
sleep? Especially since the range here is so large.

> +
> + while (dcd_timeout_ms < TDCD_TIMEOUT_MS) {
> + value = padctl_readl(padctl,
> + USB2_BATTERY_CHRG_OTGPADX_CTL0(index));
> + if (value & DCD_DETECTED) {
> + dev_dbg(padctl->dev, "USB2 port %d DCD successful\n",
> + index);
> + ret = true;
> + break;
> + }
> +
> + usleep_range(20000, 22000);
> + dcd_timeout_ms += 22;
> + }

Can we just use a timed loop instead? You should be able to use
something like:

unsigned int offset = USB2_BATTERY_CHRG_OTGPADX_CTL0(index);

err = readl_poll_timeout(padctl->regs + offset, value,
value & DCD_DETECTED,
22000, TDCD_TIMEOUT_MS * 1000);

That's slightly suboptimal because it doesn't let you use padctl_readl,
but at least it gives you a standard way of doing this kind of loop.

> +
> + if (!ret)
> + dev_info(padctl->dev, "%s: DCD timeout %d ms\n", __func__,
> + dcd_timeout_ms);

Should this be a dev_err() or dev_warn()? Is this expected to happen?

> +
> + /* Turn off IP_SRC, clear DCD DETECTED*/
> + value = padctl_readl(padctl, USB2_BATTERY_CHRG_OTGPADX_CTL0(index));
> + value &= ~OP_I_SRC_EN;
> + value |= DCD_DETECTED;
> + padctl_writel(padctl, value, USB2_BATTERY_CHRG_OTGPADX_CTL0(index));
> +
> + /* Turn off D- pull-down resistor */
> + value = padctl_readl(padctl, USB2_BATTERY_CHRG_OTGPADX_CTL1(index));
> + value &= ~USBON_RPD_OVRD_VAL;
> + padctl_writel(padctl, value, USB2_BATTERY_CHRG_OTGPADX_CTL1(index));
> +
> + dev_dbg(padctl->dev, "DCD: %d\n", ret);
> +}
> +
> +static bool tegra_xusb_padctl_utmi_pad_primary_charger_detect(
> + struct tegra_xusb_padctl *padctl, u32 index)
> +{
> + u32 value;
> + int ret = false;

It doesn't look like there's a need to initialize this.

> +
> + /* data contact detection */
> + tegra_xusb_padctl_utmi_pad_dcd(padctl, index);
> +
> + /* Source D+ to D- */
> + value = padctl_readl(padctl, USB2_BATTERY_CHRG_OTGPADX_CTL0(index));
> + value |= OP_SRC_EN | ON_SINK_EN;
> + padctl_writel(padctl, value, USB2_BATTERY_CHRG_OTGPADX_CTL0(index));
> +
> + /* Wait for TVDPSRC_ON */
> + msleep(40);

Again, is this a hardware condition that we can wait on by polling a
register?

> +
> + value = padctl_readl(padctl, USB2_BATTERY_CHRG_OTGPADX_CTL0(index));
> + ret = !!(value & VDAT_DET);
> +
> + /* Turn off OP_SRC, ON_SINK, clear VDAT, ZIN status change */
> + value = padctl_readl(padctl, USB2_BATTERY_CHRG_OTGPADX_CTL0(index));
> + value &= ~(OP_SRC_EN | ON_SINK_EN);
> + padctl_writel(padctl, value, USB2_BATTERY_CHRG_OTGPADX_CTL0(index));
> +
> + return ret;
> +}
> +
> +static bool tegra_xusb_padctl_utmi_pad_secondary_charger_detect(
> + struct tegra_xusb_padctl *padctl, u32 index)
> +{
> + u32 value;
> + bool ret = false;
> +
> + /* Source D- to D+ */
> + value = padctl_readl(padctl, USB2_BATTERY_CHRG_OTGPADX_CTL0(index));
> + value |= ON_SRC_EN | OP_SINK_EN;
> + padctl_writel(padctl, value, USB2_BATTERY_CHRG_OTGPADX_CTL0(index));
> +
> + /* Wait for TVDPSRC_ON */
> + msleep(40);
> +
> + value = padctl_readl(padctl, USB2_BATTERY_CHRG_OTGPADX_CTL0(index));
> + ret = !(value & VDAT_DET);
> +
> + /* Turn off ON_SRC, OP_SINK, clear VDAT, ZIP status change */
> + value = padctl_readl(padctl, USB2_BATTERY_CHRG_OTGPADX_CTL0(index));
> + value &= ~(ON_SRC_EN | OP_SINK_EN);
> + padctl_writel(padctl, value, USB2_BATTERY_CHRG_OTGPADX_CTL0(index));
> +
> + return ret;
> +}

This seems to be mostly identical to the primary charger detect, so
perhaps this can be parameterized instead? I'm not generally opposed to
splitting functions up like this if they are fairly small, but in this
particular case, splitting up could make the name a lot shorter, and in
this case it's really quite excessive (I count 51 characters...) =)

> +
> +enum usb_charger_type tegra_xusb_padctl_charger_detect(
> + struct tegra_xusb_port *port)
> +{
> + struct tegra_xusb_padctl *padctl = port->padctl;
> + struct phy *phy = port->lane->pad->lanes[port->index];
> + struct tegra_xusb_usb2_lane *usb2 = to_usb2_lane(port->lane);
> + u32 index = port->index;
> + enum usb_charger_type chrg_type;
> + bool pad_power_off = false;
> +
> + mutex_lock(&padctl->lock);
> +
> + if (!usb2->powered_on) {
> + padctl->soc->ops->utmi_pad_power_on(phy);
> + pad_power_off = true;
> + }
> +
> + tegra_xusb_padctl_utmi_pad_charger_detect_on(padctl, index);
> + tegra_xusb_padctl_set_debounce_time(padctl, 0xa);

Perhaps use 10 here because that's how we're usually used to read time
values.

> + tegra_xusb_padctl_detect_filters(padctl, index, true);
> +
> + if (tegra_xusb_padctl_utmi_pad_primary_charger_detect(padctl,
> + index)) {
> + /*
> + * wait 20ms (max of TVDMSRC_DIS) for D- to be disabled
> + * from host side, before we perform secondary detection.
> + * Some hosts may not respond well if we do secondary
> + * detection right after primary detection.
> + */
> + msleep(20);

Could use a blank line after this for readability.

> + if (tegra_xusb_padctl_utmi_pad_secondary_charger_detect(padctl,
> + index))
> + chrg_type = CDP_TYPE;
> + else
> + chrg_type = DCP_TYPE;
> + } else {
> + chrg_type = SDP_TYPE;
> + }
> +
> + dev_dbg(&port->dev, "charger detected of type %d", chrg_type);

Do we have a string representation of this?

> +
> + tegra_xusb_padctl_detect_filters(padctl, index, false);
> + tegra_xusb_padctl_utmi_pad_charger_detect_off(padctl, index);
> +
> + if (pad_power_off)
> + padctl->soc->ops->utmi_pad_power_down(phy);
> +
> + mutex_unlock(&padctl->lock);
> + return chrg_type;
> +}
> +
> +MODULE_AUTHOR("Nagarjuna Kristam <nkristam@xxxxxxxxxx>");
> +MODULE_DESCRIPTION("NVIDIA Tegra186 XUSB charger detect driver");
> +MODULE_LICENSE("GPL v2");
> diff --git a/drivers/phy/tegra/xusb.c b/drivers/phy/tegra/xusb.c
> index de4a46f..e505ac4 100644
> --- a/drivers/phy/tegra/xusb.c
> +++ b/drivers/phy/tegra/xusb.c
> @@ -591,6 +591,50 @@ static enum usb_phy_events to_usb_phy_event(enum usb_role role)
> }
> }
>
> +#define VON_DIV2P0_DET BIT(0)
> +#define VON_DIV2P7_DET BIT(1)
> +#define VOP_DIV2P0_DET BIT(2)
> +#define VOP_DIV2P7_DET BIT(3)
> +
> +#define VREG_CUR_LEVEL_0 500
> +#define VREG_CUR_LEVEL_1 900
> +#define VREG_CUR_LEVEL_2 1500
> +#define VREG_CUR_LEVEL_3 2000
> +
> +#define IS_CUR_IN_RANGE(ma, low, high) \
> + ((ma >= VREG_CUR_LEVEL_##low) && (ma <= (VREG_CUR_LEVEL_##high - 1)))
> +#define VREG_LVL(ma, level) IS_CUR_IN_RANGE(ma, level, level + 1)
> +
> +static void tegra_xusb_padctl_vbus_pad_portection(struct tegra_xusb_port *port)
> +{
> + struct tegra_xusb_padctl *padctl = port->padctl;
> + int level = 0;
> + enum tegra_vbus_dir dir = TEGRA_VBUS_SINK;
> + int max_ua, min_ua;
> +
> + if (!padctl->soc->ops->utmi_pad_set_protection_level)
> + return;
> +
> + usb_phy_get_charger_current(&port->usb_phy, &min_ua, &max_ua);
> +
> + if (max_ua == 0) {
> + level = -1;
> + dir = TEGRA_VBUS_DEFAULT;
> + } else if (VREG_LVL(max_ua, 0)) {
> + level = 0;
> + } else if (VREG_LVL(max_ua, 1)) {
> + level = 1;
> + } else if (VREG_LVL(max_ua, 2)) {
> + level = 2;
> + } else if (max_ua >= VREG_CUR_LEVEL_3) {
> + level = 3;
> + } else {
> + return;
> + }
> +
> + padctl->soc->ops->utmi_pad_set_protection_level(port, max_ua, dir);
> +}

level seems to never be used in the above. Instead you just pass max_ua
to the set protection level callback.

> +
> static void tegra_xusb_usb_phy_work(struct work_struct *work)
> {
> struct tegra_xusb_port *port = container_of(work,
> @@ -598,6 +642,10 @@ static void tegra_xusb_usb_phy_work(struct work_struct *work)
> usb_phy_work);
> enum usb_role role = usb_role_switch_get_role(port->usb_role_sw);
>
> + /* Set role to none, if charger is DCP type */
> + if (port->chrg_type == DCP_TYPE)
> + role = USB_ROLE_NONE;
> +
> usb_phy_set_event(&port->usb_phy, to_usb_phy_event(role));
>
> dev_dbg(&port->dev, "%s(): calling notifier for role %s\n", __func__,
> @@ -610,9 +658,26 @@ static int tegra_xusb_role_sw_set(struct usb_role_switch *sw,
> enum usb_role role)
> {
> struct tegra_xusb_port *port = usb_role_switch_get_drvdata(sw);
> + enum usb_charger_state charger_state;
>
> dev_dbg(&port->dev, "%s(): role %s\n", __func__, usb_roles[role]);
>
> + /* Do charger detect if role is Device and charger detect is enabled */
> + if (port->charger_detect) {
> + if (role == USB_ROLE_DEVICE)
> + port->chrg_type =
> + tegra_xusb_padctl_charger_detect(port);
> + else
> + port->chrg_type = UNKNOWN_TYPE;
> +
> + charger_state = (port->chrg_type == UNKNOWN_TYPE) ?
> + USB_CHARGER_ABSENT : USB_CHARGER_PRESENT;
> +
> + usb_phy_set_charger_state(&port->usb_phy, charger_state);
> +
> + tegra_xusb_padctl_vbus_pad_portection(port);
> + }
> +
> schedule_work(&port->usb_phy_work);
>
> return 0;
> @@ -643,6 +708,14 @@ static int tegra_xusb_set_host(struct usb_otg *otg, struct usb_bus *host)
> return 0;
> }
>
> +static enum usb_charger_type tegra_xusb_charger_detect(struct usb_phy *usb_phy)
> +{
> + struct tegra_xusb_port *port = container_of(usb_phy,
> + struct tegra_xusb_port,
> + usb_phy);
> +
> + return port->chrg_type;
> +}
>
> static int tegra_xusb_setup_usb_role_switch(struct tegra_xusb_port *port)
> {
> @@ -693,6 +766,9 @@ static int tegra_xusb_setup_usb_role_switch(struct tegra_xusb_port *port)
> port->usb_phy.otg->set_peripheral = tegra_xusb_set_peripheral;
> port->usb_phy.otg->set_host = tegra_xusb_set_host;
>
> + if (port->charger_detect)
> + port->usb_phy.charger_detect = tegra_xusb_charger_detect;
> +
> err = usb_add_phy_dev(&port->usb_phy);
> if (err < 0) {
> dev_err(&port->dev, "Failed to add USB PHY: %d\n", err);
> @@ -727,6 +803,10 @@ static int tegra_xusb_usb2_port_parse_dt(struct tegra_xusb_usb2_port *usb2)
> usb2->mode = USB_DR_MODE_HOST;
> }
>
> + if (port->padctl->soc->charger_detect &&
> + of_property_read_bool(np, "nvidia,charger-detect"))
> + port->charger_detect = true;
> +
> /* usb-role-switch property is mandatory for OTG/Peripheral modes */
> if (usb2->mode == USB_DR_MODE_PERIPHERAL ||
> usb2->mode == USB_DR_MODE_OTG) {
> diff --git a/drivers/phy/tegra/xusb.h b/drivers/phy/tegra/xusb.h
> index 79e96b0..714bca2 100644
> --- a/drivers/phy/tegra/xusb.h
> +++ b/drivers/phy/tegra/xusb.h
> @@ -282,6 +282,9 @@ struct tegra_xusb_port {
> struct work_struct usb_phy_work;
> struct usb_phy usb_phy;
>
> + bool charger_detect;
> + enum usb_charger_type chrg_type;
> +
> const struct tegra_xusb_port_ops *ops;
> };
>
> @@ -306,6 +309,9 @@ struct tegra_xusb_port *
> tegra_xusb_find_port(struct tegra_xusb_padctl *padctl, const char *type,
> unsigned int index);
>
> +enum usb_charger_type tegra_xusb_padctl_charger_detect(
> + struct tegra_xusb_port *port);
> +
> struct tegra_xusb_usb2_port {
> struct tegra_xusb_port base;
>
> @@ -430,6 +436,7 @@ struct tegra_xusb_padctl_soc {
> unsigned int num_supplies;
> bool supports_gen2;
> bool need_fake_usb3_port;
> + bool charger_detect;

Perhaps make this "supports_charger_detection" because it being in the
SoC structure means that it's a capability. "charger_detect" makes it
look like an option that we've enabled or not. That's what struct
tegra_xusb_port.charger_detect already is.

Thierry

Attachment: signature.asc
Description: PGP signature

Next message: Cristian Ciocaltea: "[PATCH 1/1] dma: actions: Fix lockdep splat for owl-dma"
Previous message: Masahiro Yamada: "BPFilter: bit size mismatch between bpfiter_umh and vmliux"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]