Re: [PATCH 1/3] usb/ohci-platform: Fix a warning when hibernating

[Alan Stern]

On Fri, 24 Apr 2020, Qais Yousef wrote:

> The following warning was observed when attempting to suspend to disk
> using a USB flash as a swap device.
> 
> [  111.779649] ------------[ cut here ]------------
> [  111.788382] URB (____ptrval____) submitted while active
> [  111.796646] WARNING: CPU: 3 PID: 365 at drivers/usb/core/urb.c:363 usb_submit_urb+0x3d8/0x590
> [  111.805417] Modules linked in:
> [  111.808584] CPU: 3 PID: 365 Comm: kworker/3:2 Not tainted 5.6.0-rc6-00002-gdfd1731f9a3e-dirty #545
> [  111.817796] Hardware name: ARM Juno development board (r2) (DT)
> [  111.823896] Workqueue: usb_hub_wq hub_event
> [  111.828217] pstate: 60000005 (nZCv daif -PAN -UAO)
> [  111.833156] pc : usb_submit_urb+0x3d8/0x590
> [  111.837471] lr : usb_submit_urb+0x3d8/0x590
> [  111.841783] sp : ffff800018de38b0
> [  111.845205] x29: ffff800018de38b0 x28: 0000000000000003
> [  111.850682] x27: ffff000970530b20 x26: ffff8000133fd000
> [  111.856159] x25: ffff8000133fd000 x24: ffff800018de3b38
> [  111.861635] x23: 0000000000000004 x22: 0000000000000c00
> [  111.867112] x21: 0000000000000000 x20: 00000000fffffff0
> [  111.872589] x19: ffff0009704e7a00 x18: ffffffffffffffff
> [  111.878065] x17: 00000000a7c8f4bc x16: 000000002af33de8
> [  111.883542] x15: ffff8000133fda88 x14: 0720072007200720
> [  111.889019] x13: 0720072007200720 x12: 0720072007200720
> [  111.894496] x11: 0000000000000000 x10: 00000000a5286134
> [  111.899973] x9 : 0000000000000002 x8 : ffff000970c837a0
> [  111.905449] x7 : 0000000000000000 x6 : ffff800018de3570
> [  111.910926] x5 : 0000000000000001 x4 : 0000000000000003
> [  111.916401] x3 : 0000000000000000 x2 : ffff800013427118
> [  111.921879] x1 : 9d4e965b4b7d7c00 x0 : 0000000000000000
> [  111.927356] Call trace:
> [  111.929892]  usb_submit_urb+0x3d8/0x590
> [  111.933852]  hub_activate+0x108/0x7f0
> [  111.937633]  hub_resume+0xac/0x148
> [  111.941149]  usb_resume_interface.isra.10+0x60/0x138
> [  111.946265]  usb_resume_both+0xe4/0x140
> [  111.950225]  usb_runtime_resume+0x24/0x30
> [  111.954365]  __rpm_callback+0xdc/0x138
> [  111.958236]  rpm_callback+0x34/0x98
> [  111.961841]  rpm_resume+0x4a8/0x720
> [  111.965445]  rpm_resume+0x50c/0x720
> [  111.969049]  __pm_runtime_resume+0x4c/0xb8
> [  111.973276]  usb_autopm_get_interface+0x28/0x60
> [  111.977948]  hub_event+0x80/0x16d8
> [  111.981466]  process_one_work+0x2a4/0x748
> [  111.985604]  worker_thread+0x48/0x498
> [  111.989387]  kthread+0x13c/0x140
> [  111.992725]  ret_from_fork+0x10/0x18
> [  111.996415] irq event stamp: 354
> [  111.999756] hardirqs last  enabled at (353): [<ffff80001019ea1c>] console_unlock+0x504/0x5b8
> [  112.008441] hardirqs last disabled at (354): [<ffff8000100a95d0>] do_debug_exception+0x1a8/0x258
> [  112.017479] softirqs last  enabled at (350): [<ffff8000100818a4>] __do_softirq+0x4bc/0x568
> [  112.025984] softirqs last disabled at (343): [<ffff8000101145a4>] irq_exit+0x144/0x150
> [  112.034129] ---[ end trace dc96030b9cf6c8a3 ]---
> 
> The problem was tracked down to a missing call to
> pm_runtime_set_active() on resume in ohci-platform.
> 
> Link: https://lore.kernel.org/lkml/20200323143857.db5zphxhq4hz3hmd@xxxxxxxxxxxxxxxxxxxxxxxxxxxxx/
> Signed-off-by: Qais Yousef <qais.yousef@xxxxxxx>
> CC: Tony Prisk <linux@xxxxxxxxxxxxxxx>
> CC: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
> CC: Mathias Nyman <mathias.nyman@xxxxxxxxx>
> CC: Oliver Neukum <oneukum@xxxxxxx>
> CC: linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
> CC: linux-usb@xxxxxxxxxxxxxxx
> CC: linux-kernel@xxxxxxxxxxxxxxx
> ---
>  drivers/usb/host/ohci-platform.c | 5 +++++
>  1 file changed, 5 insertions(+)
> 
> diff --git a/drivers/usb/host/ohci-platform.c b/drivers/usb/host/ohci-platform.c
> index 7addfc2cbadc..4a8456f12a73 100644
> --- a/drivers/usb/host/ohci-platform.c
> +++ b/drivers/usb/host/ohci-platform.c
> @@ -299,6 +299,11 @@ static int ohci_platform_resume(struct device *dev)
>  	}
>  
>  	ohci_resume(hcd, false);
> +
> +	pm_runtime_disable(dev);
> +	pm_runtime_set_active(dev);
> +	pm_runtime_enable(dev);
> +
>  	return 0;
>  }
>  #endif /* CONFIG_PM_SLEEP */

For both this patch and the 3/3 patch (ehci-platform):

Acked-by: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>

Alan Stern