Re: [PATCH] arm64: dts: imx8mn: Update VDD_ARM 1.2GHz setpoint voltage

[Shawn Guo]

On Sat, Apr 25, 2020 at 08:29:50PM +0800, Anson Huang wrote:
> The latest datasheet Rev. 0.1, 03/2020 removes below constrain:
> 
> "If VDD_SOC/GPU/DDR = 0.95V, then VDD_ARM must be >= 0.95V."
> 
> So, for 1.2GHz setpoint VDD_ARM can use its typical voltage
> directly.
> 
> The datasheet can be downloaded from below link:
> https://www.nxp.com/docs/en/data-sheet/IMX8MNCEC.pdf
> 
> Signed-off-by: Anson Huang <Anson.Huang@xxxxxxx>

Applied, thanks.