Re: [PATCH v1 1/2] dt-bindings: mfd: Document QTI I2C PMIC controller

[Lee Jones]

On Tue, 28 Apr 2020, Guru Das Srinagesh wrote:

> The Qualcomm Technologies, Inc. I2C PMIC Controller is used by
> multi-function PMIC devices which communicate over the I2C bus.  The
> controller enumerates all child nodes as platform devices, and
> instantiates a regmap interface for them to communicate over the I2C
> bus.
> 
> The controller also controls interrupts for all of the children platform
> devices.  The controller handles the summary interrupt by deciphering
> which peripheral triggered the interrupt, and which of the peripheral
> interrupts were triggered.  Finally, it calls the interrupt handlers for
> each of the virtual interrupts that were registered.
> 
> Signed-off-by: Guru Das Srinagesh <gurus@xxxxxxxxxxxxxx>
> ---
> Changes from v0:
> - Fixed "FATAL ERROR: Unable to parse input tree" error thrown by `make
>   dt_binding_check`.
> 
>  .../devicetree/bindings/mfd/qcom,i2c-pmic.yaml     | 86 ++++++++++++++++++++++
>  1 file changed, 86 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/mfd/qcom,i2c-pmic.yaml
> 
> diff --git a/Documentation/devicetree/bindings/mfd/qcom,i2c-pmic.yaml b/Documentation/devicetree/bindings/mfd/qcom,i2c-pmic.yaml
> new file mode 100644
> index 0000000..42482af
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mfd/qcom,i2c-pmic.yaml
> @@ -0,0 +1,86 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/mfd/qcom,i2c-pmic.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Qualcomm Technologies, Inc. I2C PMIC Interrupt Controller Platform Independent Bindings
> +
> +description: |
> +  The I2C PMIC Controller is used by multi-function PMIC devices which
> +  communicate over the I2C bus. An I2C PMIC controller node typically contains
> +  one or more child nodes representing the device's peripherals. Each of the
> +  peripherals typically has its own driver on the platform bus and will be
> +  enumerated by this controller. The controller exposes a regmap to the
> +  peripherals to communicate over the I2C bus.
> +
> +  The controller also controls interrupts for all of the peripherals on the
> +  bus. The controller takes a summary interrupt, deciphers which peripheral
> +  triggered the interrupt, and which of the peripheral's interrupts were
> +  triggered. Finally, it calls the handlers for each of the virtual interrupts
> +  that were registered.
> +
> +  This document describes the common platform independent bindings that apply
> +  to all I2C PMIC interrupt controllers.
> +
> +maintainers:
> +  - Guru Das Srinagesh <gurus@xxxxxxxxxxxxxx>
> +
> +properties:
> +  compatible:
> +    const: qcom,i2c-pmic
> +
> +  reg:
> +    description: 7-bit I2C address of the device.
> +    maxItems: 1
> +
> +  interrupts:
> +    description: Summary interrupt specifier.
> +
> +  interrupt-controller:
> +    description: Flag indicating that this device is an interrupt controller.
> +
> +  "#interrupt-cells":
> +    description: Number of cells to encode an interrupt source.
> +
> +  qcom,periph-map:
> +    description: |
> +      A contiguous list of u32 arrays where each element specifies the base
> +      address of a single peripheral within the chip. This provides a mapping
> +      between the summary status register bits and peripheral addresses as each
> +      bit in the summary status register represents a peripheral.
> +
> +      The number of arrays should match the number of summary registers with up
> +      to 8 elements each. Within each array, One element per bit of the summary
> +      status register in order from the least sigificant bit to the most
> +      significant bit.
> +    $ref: /schemas/types.yaml#/definitions/uint32-array
> +
> +  pinctrl-names:
> +    const: default
> +
> +  pinctrl-0:
> +    description: phandle of the pin configuration.
> +    $ref: /schemas/types.yaml#/definitions/phandle
> +
> +required:
> +  - compatible
> +  - reg
> +
> +examples:
> +  - |
> +    qcom,smb138x@8 {
> +      compatible = "qcom,i2c-pmic";
> +      reg = <0x8>;
> +      interrupt-parent = <&tlmm_pinmux>;
> +      interrupts = <83 0>;
> +      interrupt-controller;
> +      #interrupt-cells = <3>;
> +      pinctrl-names = "default";
> +      pinctrl-0 = <&smb_stat_active>;
> +      #address-cells = <1>;
> +      #size-cells = <0>;
> +      qcom,periph-map = <0x10 0x11 0x12 0x13 0x14 0x16 0x36>;

Please provide examples of this device's children.

> +    };
> +
> +...

-- 
Lee Jones [æçæ]
Linaro Services Technical Lead
Linaro.org â Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog