Re: [PATCH v4] Add new uio device for PCI with dynamic memory allocation

[Stahl, Manuel]

On Di, 2020-04-28 at 15:54 +0200, gregkh @ linuxfoundation . org wrote:
> On Thu, Apr 16, 2020 at 06:38:30PM +0200, Manuel Stahl wrote:
> > 
> > + *
> > + * Since the driver does not declare any device ids, you must allocate
> > + * id and bind the device to the driver yourself.  For example:
> > + *
> > + * # echo "8086 10f5" > /sys/bus/pci/drivers/uio_pci_dmem_genirq/new_id
> > + * # echo -n 0000:00:19.0 > /sys/bus/pci/drivers/e1000e/unbind
> > + * # echo -n 0000:00:19.0 > /sys/bus/pci/drivers/uio_pci_dmem_genirq/bind
> > + * # ls -l /sys/bus/pci/devices/0000:00:19.0/driver
> > + * .../0000:00:19.0/driver -> ../../../bus/pci/drivers/uio_pci_dmem_genirq
> > + *
> > + * Or use a modprobe alias:
> > + * # alias pci:v000010EEd00001000sv*sd*sc*i* uio_pci_dmem_genirq
> > + *
> > + * Driver won't bind to devices which do not support the Interrupt Disable Bit
> > + * in the command register. All devices compliant to PCI 2.3 (circa 2002) and
> > + * all compliant PCI Express devices should support this bit.
> > + *
> > + * The DMA mask bits and sizes of dynamic regions are derived from module
> > + * parameters.
> > + *
> > + * The format for specifying dynamic region sizes in module parameters
> > + * is as follows:
> > + *
> > + * uio_pci_dmem_genirq.dmem_sizes := <uio_dmem_sizes_def>[;<uio_dmem_sizes_def>]
> > + * <uio_dmem_sizes_def>           := <pci_id>:<size>[,<size>]
> > + * <pci_id>                       := <vendor>:<device>
> > + * <size>                         := standard linux memsize
> > + *
> > + * Examples:
> > + *
> > + * 1) UIO dmem device with 3 dynamic regions:
> > + * uio_pci_dmem_genirq.dmem_sizes=8086:10f5:4K,16K,4M
> > + *
> > + * 2) Two UIO dmem devices with different number of dynamic regions:
> > + * uio_pci_dmem_genirq.dmem_sizes=8086:10f5:4K,16K,4M;1234:0001:8K
> 
> Module parameters are horrid, are you sure there is no other way?

You're right, seemed to be the simplest solution back when we started developing this driver. I will try to change it to sysfs, so that one can add regions while the module is already loaded.

Regards,
Manuel