Re: [PATCH v4 2/2] mtd: rawnand: Add NAND controller support on Intel LGM SoC

[Boris Brezillon]

On Wed, 29 Apr 2020 18:42:05 +0800
"Ramuthevar, Vadivel MuruganX"
<vadivel.muruganx.ramuthevar@xxxxxxxxxxxxxxx> wrote:

> +
> +#define EBU_ADDR_SEL(n)		(0x20 + (n) * 4)
> +#define EBU_ADDR_MASK		(5 << 4)

It's still unclear what ADDR_MASK is for. Can you add a comment
explaining what it does?

> +#define EBU_ADDR_SEL_REGEN	0x1


> +
> +	writel(lower_32_bits(ebu_host->cs[ebu_host->cs_num].nand_pa) |
> +	       EBU_ADDR_SEL_REGEN | EBU_ADDR_MASK,
> +	       ebu_host->ebu + EBU_ADDR_SEL(reg));
> +
> +	writel(EBU_MEM_BASE_CS_0 | EBU_ADDR_MASK | EBU_ADDR_SEL_REGEN,
> +	       ebu_host->ebu + EBU_ADDR_SEL(0));
> +	writel(EBU_MEM_BASE_CS_1 | EBU_ADDR_MASK | EBU_ADDR_SEL_REGEN,
> +	       ebu_host->ebu + EBU_ADDR_SEL(reg));

That's super weird. You seem to set EBU_ADDR_SEL(reg) twice. Are you
sure that's needed, and are we setting EBU_ADDR_SEL(0) here?