Re: [PATCH v3 03/17] arm64: dts: sdm845: Add OPP table for all qup devices

From: Rajendra Nayak
Date: Wed Apr 29 2020 - 10:53:44 EST



On 4/29/2020 7:45 PM, Rajendra Nayak wrote:

On 4/29/2020 5:32 AM, Matthias Kaehlcke wrote:
Hi Rajendra,

On Tue, Apr 28, 2020 at 07:02:51PM +0530, Rajendra Nayak wrote:
qup has a requirement to vote on the performance state of the CX domain
in sdm845 devices. Add OPP tables for these and also add power-domains
property for all qup instances.

Signed-off-by: Rajendra Nayak <rnayak@xxxxxxxxxxxxxx>
Signed-off-by: Stephen Boyd <swboyd@xxxxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/sdm845.dtsi | 115 +++++++++++++++++++++++++++++++++++
 1 file changed, 115 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index 8f926b5..36b9fb1 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -804,6 +804,25 @@
ÂÂÂÂÂÂÂÂÂÂÂÂÂ clock-names = "core";
ÂÂÂÂÂÂÂÂÂ };
+ÂÂÂÂÂÂÂ qup_opp_table: qup-opp-table {
+ÂÂÂÂÂÂÂÂÂÂÂ compatible = "operating-points-v2";
+
+ÂÂÂÂÂÂÂÂÂÂÂ opp-19200000 {
+ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ opp-hz = /bits/ 64 <19200000>;
+ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ required-opps = <&rpmhpd_opp_min_svs>;
+ÂÂÂÂÂÂÂÂÂÂÂ };
+
+ÂÂÂÂÂÂÂÂÂÂÂ opp-75000000 {
+ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ opp-hz = /bits/ 64 <75000000>;
+ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ required-opps = <&rpmhpd_opp_low_svs>;
+ÂÂÂÂÂÂÂÂÂÂÂ };
+
+ÂÂÂÂÂÂÂÂÂÂÂ opp-100000000 {
+ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ opp-hz = /bits/ 64 <100000000>;
+ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ required-opps = <&rpmhpd_opp_svs>;
+ÂÂÂÂÂÂÂÂÂÂÂ };
+ÂÂÂÂÂÂÂ };
+

Judging from SDM845 (which has more OPP tables) the convention seems to be
to add OPP tables to the nodes that use them, which seems reasonable and
keeps them out of the device list.

Unfortunately this convention isn't completely suitable for cases like this
(and the DSI OPPs later in this series), where the same OPP table is used by
multiple devices. A possible compromise would be to add the table to the
node of the first device that uses them.

Sounds fair, I will do that and respin. Thanks.

Looking into this some more, I see we do have..

static const struct of_device_id of_skipped_node_table[] = {
{ .compatible = "operating-points-v2", },
{} /* Empty terminated list */
};

..in drivers/of/platform.c, so its not being added to the device list.

And atleast in case of qup, I am having to duplicate the OPP tables once for
each qup instance. Not to mention, having them inside the first qup device
just makes it a little confusing to read who the OPP table belongs to.

--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation