Re: [PATCH v4 0/4] Add XHCI, EHCI and OHCI support for Broadcom STB SoS's

[Andy Shevchenko]

On Wed, Apr 29, 2020 at 8:33 PM Al Cooper <alcooperx@xxxxxxxxx> wrote:
>
> v4 - A few more fixes to the brcm,bcm7445-ehci.yaml dt-bindings
>      document requested by Rob Herring.
>    - Fixed ordering issue in MAINTAINERS as requested by
>      Andy Shevchenko.

FWIW,
Reviewed-by: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>

(consider addressing couple of minor comments)

>
> v3 - Addressed all of Andy Shevchenko's review comments for
>      ehci-brcm.c.
>    - Fixed the brcm,bcm7445-ehci.yaml dt-bindings document,
>      dt_binding_check now passes.
>    - Added the XHCI functionality to xhci-plat.c instead of creating
>      new brcmstb files, as suggested by Mathias Nyman.
>
> v2 - Addressed Andy Shevchenko's review comments.
>    - Fixed dt_binding_check error pointed out by Rob Herring.
>    - Removed pr_info message in ehci_brcm_init as suggested by
>      Greg Kroah-Hartman.
>
>
> Al Cooper (4):
>   dt-bindings: Add Broadcom STB USB support
>   usb: xhci: xhci-plat: Add support for Broadcom STB SoC's
>   usb: ehci: Add new EHCI driver for Broadcom STB SoC's
>   usb: host: Add ability to build new Broadcom STB USB drivers
>
>  .../bindings/usb/brcm,bcm7445-ehci.yaml       |  60 ++++
>  .../devicetree/bindings/usb/usb-xhci.txt      |   1 +
>  MAINTAINERS                                   |   8 +
>  drivers/usb/host/Kconfig                      |  16 +
>  drivers/usb/host/Makefile                     |  16 +-
>  drivers/usb/host/ehci-brcm.c                  | 286 ++++++++++++++++++
>  drivers/usb/host/xhci-plat.c                  |  10 +
>  7 files changed, 391 insertions(+), 6 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/usb/brcm,bcm7445-ehci.yaml
>  create mode 100644 drivers/usb/host/ehci-brcm.c
>
> --
> 2.17.1
>


-- 
With Best Regards,
Andy Shevchenko