Re: [PATCH v6 1/2] PCI: xilinx-cpm: Add device tree binding for Versal CPM Root Port

[Rob Herring]

On Fri, Apr 24, 2020 at 05:34:03PM +0530, Bharat Kumar Gogada wrote:
> Add device tree binding documentation for Versal CPM Root Port driver.
> 
> Signed-off-by: Bharat Kumar Gogada <bharat.kumar.gogada@xxxxxxxxxx>
> ---
>  .../devicetree/bindings/pci/xilinx-versal-cpm.txt  | 68 ++++++++++++++++++++++
>  1 file changed, 68 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/pci/xilinx-versal-cpm.txt

DT bindings need to Cc DT list to be reviewed. Bindings are now in DT 
schema format. See Documentation/devicetree/writing-schema.rst.

Sorry to tell you this on v6, but first I'm seeing it.

> 
> diff --git a/Documentation/devicetree/bindings/pci/xilinx-versal-cpm.txt b/Documentation/devicetree/bindings/pci/xilinx-versal-cpm.txt
> new file mode 100644
> index 0000000..eac6144
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pci/xilinx-versal-cpm.txt
> @@ -0,0 +1,68 @@
> +* Xilinx Versal CPM DMA Root Port Bridge DT description
> +
> +Required properties:
> +- #address-cells: Address representation for root ports, set to <3>
> +- #size-cells: Size representation for root ports, set to <2>
> +- #interrupt-cells: specifies the number of cells needed to encode an
> +	interrupt source. The value must be 1.
> +- compatible: Should contain "xlnx,versal-cpm-host-1.00"
> +- reg: Should contain configuration space (includes bridge registers) and
> +	CPM system level control and status registers, and length
> +- reg-names: Must include the following entries:
> +	"cfg": configuration space region and bridge registers
> +	"cpm_slcr": CPM system level control and status registers
> +- interrupts: Should contain AXI PCIe interrupt
> +- interrupt-map-mask,
> +  interrupt-map: standard PCI properties to define the mapping of the
> +	PCI interface to interrupt numbers.
> +- bus-range: Range of bus numbers associated with this controller
> +- ranges: ranges for the PCI memory regions (I/O space region is not
> +	supported by hardware)
> +	Please refer to the standard PCI bus binding document for a more
> +	detailed explanation
> +- msi-map: Maps a Requester ID to an MSI controller and associated MSI
> +	sideband data
> +- interrupt-names: Must include the following entries:
> +	"misc": interrupt asserted when legacy or error interrupt is received

Don't really need a name when only 1.

> +
> +Interrupt controller child node
> ++++++++++++++++++++++++++++++++
> +Required properties:
> +- interrupt-controller: identifies the node as an interrupt controller
> +- #address-cells: specifies the number of cells needed to encode an
> +	address. The value must be 0.
> +- #interrupt-cells: specifies the number of cells needed to encode an
> +	interrupt source. The value must be 1.
> +
> +
> +Refer to the following binding document for more detailed description on
> +the use of 'msi-map':
> +	 Documentation/devicetree/bindings/pci/pci-msi.txt
> +
> +Example:
> +	pci@fca10000 {

Unit address is normally the first entry.

> +		#address-cells = <3>;
> +		#interrupt-cells = <1>;
> +		#size-cells = <2>;
> +		compatible = "xlnx,versal-cpm-host-1.00";
> +		interrupt-map = <0 0 0 1 &pcie_intc_0 0>,
> +				<0 0 0 2 &pcie_intc_0 1>,
> +				<0 0 0 3 &pcie_intc_0 2>,
> +				<0 0 0 4 &pcie_intc_0 3>;
> +		interrupt-map-mask = <0 0 0 7>;
> +		interrupt-parent = <&gic>;
> +		interrupt-names = "misc";
> +		interrupts = <0 72 4>;
> +		bus-range = <0x00 0xff>;
> +		ranges = <0x02000000 0x00000000 0xE0000000 0x0 0xE0000000 0x00000000 0x10000000>,

lowercase hex please.

> +			 <0x43000000 0x00000080 0x00000000 0x00000080 0x00000000 0x00000000 0x80000000>;
> +		msi-map = <0x0 &its_gic 0x0 0x10000>;
> +		reg = <0x6 0x00000000 0x0 0x10000000>,
> +		      <0x0 0xFCA10000 0x0 0x1000>;
> +		reg-names = "cfg", "cpm_slcr";
> +		pcie_intc_0: pci-interrupt-controller {

interrupt-controller {

> +			#address-cells = <0>;
> +			#interrupt-cells = <1>;
> +			interrupt-controller ;
> +		};
> +	};
> -- 
> 2.7.4
>