Re: [PATCH] arm64: dts: meson: sm1-khadas-vim3l: add audio playback to vim3l

[Jerome Brunet]

On Wed 15 Apr 2020 at 12:23, chewitt <christianshewitt@xxxxxxxxx> wrote:

> From: Christian Hewitt <christianshewitt@xxxxxxxxx>
>
> Add the sound and related audio nodes to the VIM3L board.
>
> Signed-off-by: Christian Hewitt <christianshewitt@xxxxxxxxx>
> ---
>  .../dts/amlogic/meson-sm1-khadas-vim3l.dts    | 88 +++++++++++++++++++
>  1 file changed, 88 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts
> index dbbf29a0dbf6..b900a433ef7a 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts
> +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts
> @@ -8,6 +8,7 @@
>  
>  #include "meson-sm1.dtsi"
>  #include "meson-khadas-vim3.dtsi"
> +#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
>  
>  / {
>  	compatible = "khadas,vim3l", "amlogic,sm1";
> @@ -31,6 +32,69 @@
>  		regulator-boot-on;
>  		regulator-always-on;
>  	};
> +
> +	sound {
> +		compatible = "amlogic,axg-sound-card";
> +		model = "SM1-KHADAS-VIM3L";
> +		audio-aux-devs = <&tdmout_b>;
> +		audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
> +				"TDMOUT_B IN 1", "FRDDR_B OUT 1",
> +				"TDMOUT_B IN 2", "FRDDR_C OUT 1",
> +				"TDM_B Playback", "TDMOUT_B OUT";
> +
> +		assigned-clocks = <&clkc CLKID_MPLL2>,
> +				  <&clkc CLKID_MPLL0>,
> +				  <&clkc CLKID_MPLL1>;
> +		assigned-clock-parents = <0>, <0>, <0>;
> +		assigned-clock-rates = <294912000>,
> +				       <270950400>,
> +				       <393216000>;
> +		status = "okay";
> +
> +		dai-link-0 {
> +			sound-dai = <&frddr_a>;
> +		};
> +
> +		dai-link-1 {
> +			sound-dai = <&frddr_b>;
> +		};
> +
> +		dai-link-2 {
> +			sound-dai = <&frddr_c>;
> +		};
> +
> +		/* 8ch hdmi interface */

VIM3(L) should not use TDMOUT B or C for the HDMI interface
* B is on the 40pin header
* C is on the m2 connector

A is not routed to the outside world and should prefered for this.

See :
https://lore.kernel.org/linux-amlogic/20200421141814.639480-1-jbrunet@xxxxxxxxxxxx/

> +		dai-link-3 {
> +			sound-dai = <&tdmif_b>;
> +			dai-format = "i2s";
> +			dai-tdm-slot-tx-mask-0 = <1 1>;
> +			dai-tdm-slot-tx-mask-1 = <1 1>;
> +			dai-tdm-slot-tx-mask-2 = <1 1>;
> +			dai-tdm-slot-tx-mask-3 = <1 1>;
> +			mclk-fs = <256>;
> +
> +			codec {
> +				sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
> +			};
> +		};
> +
> +		/* hdmi glue */
> +		dai-link-4 {
> +			sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
> +
> +			codec {
> +				sound-dai = <&hdmi_tx>;
> +			};
> +		};
> +	};
> +};
> +
> +&arb {
> +	status = "okay";
> +};
> +
> +&clkc_audio {
> +	status = "okay";
>  };
>  
>  &cpu0 {
> @@ -61,6 +125,18 @@
>  	clock-latency = <50000>;
>  };
>  
> +&frddr_a {
> +	status = "okay";
> +};
> +
> +&frddr_b {
> +	status = "okay";
> +};
> +
> +&frddr_c {
> +	status = "okay";
> +};
> +
>  &pwm_AO_cd {
>  	pinctrl-0 = <&pwm_ao_d_e_pins>;
>  	pinctrl-names = "default";
> @@ -93,3 +169,15 @@
>  	phy-names = "usb2-phy0", "usb2-phy1";
>  };
>   */
> +
> +&tdmif_b {
> +	status = "okay";
> +};
> +
> +&tdmout_b {
> +	status = "okay";
> +};
> +
> +&tohdmitx {
> +	status = "okay";
> +};