[PATCH RFC v2 02/11] dt-bindings: net: dwmac-meson: Document the "timing-adjustment" clock
From: Martin Blumenstingl
Date: Wed Apr 29 2020 - 16:17:52 EST
The PRG_ETHERNET registers can add an RX delay in RGMII mode. This
requires an internal re-timing circuit whose input clock is called
"timing adjustment clock". Document this clock input so the clock can be
enabled as needed.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
---
.../devicetree/bindings/net/amlogic,meson-dwmac.yaml | 10 +++++++---
1 file changed, 7 insertions(+), 3 deletions(-)
diff --git a/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml b/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml
index 8d851f59d9f2..2bc0e8b0d25b 100644
--- a/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml
+++ b/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml
@@ -40,18 +40,22 @@ allOf:
then:
properties:
clocks:
+ minItems: 3
+ maxItems: 4
items:
- description: GMAC main clock
- description: First parent clock of the internal mux
- description: Second parent clock of the internal mux
+ - description: The clock which drives the timing adjustment logic
clock-names:
minItems: 3
- maxItems: 3
+ maxItems: 4
items:
- const: stmmaceth
- const: clkin0
- const: clkin1
+ - const: timing-adjustment
amlogic,tx-delay-ns:
$ref: /schemas/types.yaml#definitions/uint32
@@ -120,7 +124,7 @@ examples:
reg = <0xc9410000 0x10000>, <0xc8834540 0x8>;
interrupts = <8>;
interrupt-names = "macirq";
- clocks = <&clk_eth>, <&clkc_fclk_div2>, <&clk_mpll2>;
- clock-names = "stmmaceth", "clkin0", "clkin1";
+ clocks = <&clk_eth>, <&clk_fclk_div2>, <&clk_mpll2>, <&clk_fclk_div2>;
+ clock-names = "stmmaceth", "clkin0", "clkin1", "timing-adjustment";
phy-mode = "rgmii";
};
--
2.26.2