[PATCH v2 0/6] ARM: sunxi: Convert A20/A31 GMAC driver to use CCU

[Priit Laes]

This serie converts Allwinner A20 and A31 GMAC driver to CCU
while still retaining compatibility with existing devicetrees.

This patchset touches 3 areas:
- sun7i and sun6i CCUs now set up regmap to allow dwmac-sunxi driver
to properly access the GMAC clock register.
- dwmac-sunxi can now handle syscon-based clock register to handle
clock itself.
- sun7i and sun6i devicetrees are converted to use the new syscon-based
access.

Changes since v1:
* Use CLK_OF_DECLARE_DRIVER to make it possible to probe again and set up
regmap using platform device probe.
* Clarify the meaning of "legacy" in dwmac-sunxi driver.
* Make sure we don't mess with the RX/TX delay settings when updating
clock registers.
* Update devicetree bindings
* Add sun6i-A31 support. (not tested due to lack of hardware)

Priit Laes (6):
  clk: sunxi-ng: a20: Register regmap for sun7i CCU
  clk: sunxi-ng: a31: Register regmap for sun6i CCU
  net: stmmac: dwmac-sunxi: Implement syscon-based clock handling
  dt-bindings: net: sun7i-gmac: Add syscon support
  ARM: dts: sun7i: Use syscon-based implementation for gmac
  ARM: dts: sun6i: Use syscon-based implementation for gmac

 .../net/allwinner,sun7i-a20-gmac.yaml         |  15 +-
 arch/arm/boot/dts/sun6i-a31.dtsi              |  35 +----
 arch/arm/boot/dts/sun7i-a20.dtsi              |  36 +----
 drivers/clk/sunxi-ng/ccu-sun4i-a10.c          |  60 +++++++-
 drivers/clk/sunxi-ng/ccu-sun6i-a31.c          |  60 +++++++-
 .../net/ethernet/stmicro/stmmac/dwmac-sunxi.c | 130 ++++++++++++++++--
 6 files changed, 258 insertions(+), 78 deletions(-)

-- 
2.26.2