Re: [PATCH net-next v2 6/7] net: bcmgenet: add support for ethtool rxnfc flows

[Florian Fainelli]

On 4/29/20 1:02 PM, Doug Berger wrote:
> This commit enables driver support for ethtool commands of this form:
> ethtool -N|-U|--config-nfc|--config-ntuple devname
>     flow-type ether|ip4
>     [src xx:yy:zz:aa:bb:cc [m xx:yy:zz:aa:bb:cc]]
>     [dst xx:yy:zz:aa:bb:cc [m xx:yy:zz:aa:bb:cc]] [proto N [m N]]
>     [src-ip x.x.x.x [m x.x.x.x]] [dst-ip x.x.x.x [m x.x.x.x]] [tos N [m N]]
>     [l4proto N [m N]] [src-port N [m N]] [dst-port N [m N]] [spi N [m N]]
>     [l4data N [m N]] [vlan-etype N [m N]] [vlan N [m N]]
>     [dst-mac xx:yy:zz:aa:bb:cc [m xx:yy:zz:aa:bb:cc]] [action 0] [loc N] |
>     delete N
> 
> Since there is only one Rx Ring in this implementation action 0 behaves no
> differently from not specifying a rule.
> 
> The rules can be seen with ethtool commands of this form:
> ethtool -n|-u|--show-nfc|--show-ntuple devname [rule N]
> 
> Signed-off-by: Doug Berger <opendmb@xxxxxxxxx>

Acked-by: Florian Fainelli <f.fainelli@xxxxxxxxx>

I thought the Roboswitch CFP was hard, but this is another whole level
of insane :)
-- 
Florian