Re: [PATCH] dt-bindings: thermal: Convert UniPhier thermal monitor to json-schema

[Kunihiko Hayashi]

Hi Rob,

On 2020/04/29 1:20, Rob Herring wrote:
> On Thu, Apr 16, 2020 at 02:12:15PM +0900, Kunihiko Hayashi wrote:
> > Convert the UniPhier thermal monitor binding to DT schema format.
> >
> > Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@xxxxxxxxxxxxx>
> > ---
> >   .../thermal/socionext,uniphier-thermal.yaml        | 57 +++++++++++++++++++
> >   .../bindings/thermal/uniphier-thermal.txt          | 65 ----------------------
> >   2 files changed, 57 insertions(+), 65 deletions(-)
> >   create mode 100644 Documentation/devicetree/bindings/thermal/socionext,uniphier-thermal.yaml
> >   delete mode 100644 Documentation/devicetree/bindings/thermal/uniphier-thermal.txt
> >
> > diff --git a/Documentation/devicetree/bindings/thermal/socionext,uniphier-thermal.yaml b/Documentation/devicetree/bindings/thermal/socionext,uniphier-thermal.yaml
> > new file mode 100644
> > index 0000000..bdddc5b
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/thermal/socionext,uniphier-thermal.yaml
> > @@ -0,0 +1,57 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/thermal/socionext,uniphier-thermal.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Socionext UniPhier thermal monitor
> > +
> > +description: |
> > +  This describes the devicetree bindings for thermal monitor supported by
> > +  PVT(Process, Voltage and Temperature) monitoring unit implemented on
> > +  Socionext UniPhier SoCs.
> > +
> > +maintainers:
> > +  - Kunihiko Hayashi <hayashi.kunihiko@xxxxxxxxxxxxx>
> > +
> > +properties:
> > +  compatible:
> > +    enum:
> > +      - socionext,uniphier-pxs2-thermal
> > +      - socionext,uniphier-ld20-thermal
> > +      - socionext,uniphier-pxs3-thermal
> > +
> > +  interrupts:
> > +    maxItems: 1
> > +
> > +  "#thermal-sensor-cells":
> > +    const: 0
> > +
> > +  socionext,tmod-calibration:
> > +    $ref: /schemas/types.yaml#/definitions/uint32-array
> > +    description:
> > +      A pair of calibrated values referred from PVT, in case that the values
> > +      aren't set on SoC, like a reference board.
>
> So?:
>
> maxItems: 2
Okay, I'll add that in v2.

Thank you,

---
Best Regards
Kunihiko Hayashi