[PATCH v4 12/12] arm64: dts: marvell: armada-37xx: Move PCIe max-link-speed property

[Pali RohÃr]

Move the max-link-speed property of the PCIe node from board specific
device tree files to the generic armada-37xx.dtsi.

Armada 37xx supports only PCIe gen2 speed so max-link-speed property
should be in the genetic armada-37xx.dtsi file.

Signed-off-by: Pali RohÃr <pali@xxxxxxxxxx>
---
 arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts | 1 -
 arch/arm64/boot/dts/marvell/armada-37xx.dtsi           | 1 +
 2 files changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
index 15c1cf5c5b69..4cc735899c5d 100644
--- a/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
+++ b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
@@ -132,7 +132,6 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pcie_reset_pins &pcie_clkreq_pins>;
 	status = "okay";
-	max-link-speed = <2>;
 	reset-gpios = <&gpiosb 3 GPIO_ACTIVE_LOW>;
 
 	/* enabled by U-Boot if PCIe module is present */
diff --git a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
index 5aaad64a793d..2bbc69b4dc99 100644
--- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
@@ -493,6 +493,7 @@
 					<0 0 0 2 &pcie_intc 1>,
 					<0 0 0 3 &pcie_intc 2>,
 					<0 0 0 4 &pcie_intc 3>;
+			max-link-speed = <2>;
 			phys = <&comphy1 0>;
 			pcie_intc: interrupt-controller {
 				interrupt-controller;
-- 
2.20.1