[PATCH v4 08/12] PCI: aardvark: Replace custom macros by standard linux/pci_regs.h macros

[Pali RohÃr]

PCI-E capability macros are already defined in linux/pci_regs.h.
Remove their reimplementation in pcie-aardvark.

Signed-off-by: Pali RohÃr <pali@xxxxxxxxxx>
---
 drivers/pci/controller/pci-aardvark.c | 41 ++++++++++++---------------
 1 file changed, 18 insertions(+), 23 deletions(-)

diff --git a/drivers/pci/controller/pci-aardvark.c b/drivers/pci/controller/pci-aardvark.c
index 053ae6c19a3d..c53ae2511a9c 100644
--- a/drivers/pci/controller/pci-aardvark.c
+++ b/drivers/pci/controller/pci-aardvark.c
@@ -34,17 +34,6 @@
 #define     PCIE_CORE_CMD_MEM_IO_REQ_EN				BIT(2)
 #define PCIE_CORE_DEV_REV_REG					0x8
 #define PCIE_CORE_PCIEXP_CAP					0xc0
-#define PCIE_CORE_DEV_CTRL_STATS_REG				0xc8
-#define     PCIE_CORE_DEV_CTRL_STATS_RELAX_ORDER_DISABLE	(0 << 4)
-#define     PCIE_CORE_DEV_CTRL_STATS_MAX_PAYLOAD_SZ_SHIFT	5
-#define     PCIE_CORE_DEV_CTRL_STATS_SNOOP_DISABLE		(0 << 11)
-#define     PCIE_CORE_DEV_CTRL_STATS_MAX_RD_REQ_SIZE_SHIFT	12
-#define     PCIE_CORE_DEV_CTRL_STATS_MAX_RD_REQ_SZ		0x2
-#define PCIE_CORE_LINK_CTRL_STAT_REG				0xd0
-#define     PCIE_CORE_LINK_L0S_ENTRY				BIT(0)
-#define     PCIE_CORE_LINK_TRAINING				BIT(5)
-#define     PCIE_CORE_LINK_SPEED_SHIFT				16
-#define     PCIE_CORE_LINK_WIDTH_SHIFT				20
 #define PCIE_CORE_ERR_CAPCTL_REG				0x118
 #define     PCIE_CORE_ERR_CAPCTL_ECRC_CHK_TX			BIT(5)
 #define     PCIE_CORE_ERR_CAPCTL_ECRC_CHK_TX_EN			BIT(6)
@@ -223,6 +212,11 @@ static inline u32 advk_readl(struct advk_pcie *pcie, u64 reg)
 	return readl(pcie->base + reg);
 }
 
+static inline u16 advk_read16(struct advk_pcie *pcie, u64 reg)
+{
+	return advk_readl(pcie, (reg & ~0x3)) >> ((reg & 0x3) * 8);
+}
+
 static int advk_pcie_link_up(struct advk_pcie *pcie)
 {
 	u32 val, ltssm_state;
@@ -286,16 +280,16 @@ static int advk_pcie_train_at_gen(struct advk_pcie *pcie, int gen)
 	 * Start link training immediately after enabling it.
 	 * This solves problems for some buggy cards.
 	 */
-	reg = advk_readl(pcie, PCIE_CORE_LINK_CTRL_STAT_REG);
-	reg |= PCIE_CORE_LINK_TRAINING;
-	advk_writel(pcie, reg, PCIE_CORE_LINK_CTRL_STAT_REG);
+	reg = advk_readl(pcie, PCIE_CORE_PCIEXP_CAP + PCI_EXP_LNKCTL);
+	reg |= PCI_EXP_LNKCTL_RL;
+	advk_writel(pcie, reg, PCIE_CORE_PCIEXP_CAP + PCI_EXP_LNKCTL);
 
 	ret = advk_pcie_wait_for_link(pcie);
 	if (ret)
 		return ret;
 
-	reg = advk_readl(pcie, PCIE_CORE_LINK_CTRL_STAT_REG);
-	neg_gen = (reg >> PCIE_CORE_LINK_SPEED_SHIFT) & 0xf;
+	reg = advk_read16(pcie, PCIE_CORE_PCIEXP_CAP + PCI_EXP_LNKSTA);
+	neg_gen = reg & PCI_EXP_LNKSTA_CLS;
 
 	return neg_gen;
 }
@@ -385,13 +379,14 @@ static void advk_pcie_setup_hw(struct advk_pcie *pcie)
 		PCIE_CORE_ERR_CAPCTL_ECRC_CHCK_RCV;
 	advk_writel(pcie, reg, PCIE_CORE_ERR_CAPCTL_REG);
 
-	/* Set PCIe Device Control and Status 1 PF0 register */
-	reg = PCIE_CORE_DEV_CTRL_STATS_RELAX_ORDER_DISABLE |
-		(7 << PCIE_CORE_DEV_CTRL_STATS_MAX_PAYLOAD_SZ_SHIFT) |
-		PCIE_CORE_DEV_CTRL_STATS_SNOOP_DISABLE |
-		(PCIE_CORE_DEV_CTRL_STATS_MAX_RD_REQ_SZ <<
-		 PCIE_CORE_DEV_CTRL_STATS_MAX_RD_REQ_SIZE_SHIFT);
-	advk_writel(pcie, reg, PCIE_CORE_DEV_CTRL_STATS_REG);
+	/* Set PCIe Device Control register */
+	reg = advk_readl(pcie, PCIE_CORE_PCIEXP_CAP + PCI_EXP_DEVCTL);
+	reg &= ~PCI_EXP_DEVCTL_RELAX_EN;
+	reg &= ~PCI_EXP_DEVCTL_NOSNOOP_EN;
+	reg &= ~PCI_EXP_DEVCTL_READRQ;
+	reg |= PCI_EXP_DEVCTL_PAYLOAD; /* Set max payload size */
+	reg |= PCI_EXP_DEVCTL_READRQ_512B;
+	advk_writel(pcie, reg, PCIE_CORE_PCIEXP_CAP + PCI_EXP_DEVCTL);
 
 	/* Program PCIe Control 2 to disable strict ordering */
 	reg = PCIE_CORE_CTRL2_RESERVED |
-- 
2.20.1