Re: [PATCH v2 4/4] media: rockchip: rga: Only set output CSC mode for RGB input

[Paul Kocialkowski]

Hi Ezequiel,

On Sat 25 Apr 20, 10:46, Ezequiel Garcia wrote:
> Hi Paul,
> 
> Thanks a lot for the patch.
> 
> I haven't had the chance to test this,
> but I'd say you are fixing a long time issue here.
> 
> I really appreciate that.
> 
> On Thu, 2020-04-23 at 22:09 +0200, Paul Kocialkowski wrote:
> > Setting the output CSC mode is required for a YUV output, but must not
> > be set when the input is also YUV. Doing this (as tested with a YUV420P
> > to YUV420P conversion) results in wrong colors.
> > 
> > Adapt the logic to only set the CSC mode when the output is YUV and the
> > input is RGB.
> > 
> > Fixes: f7e7b48e6d79 ("[media] rockchip/rga: v4l2 m2m support")
> > Signed-off-by: Paul Kocialkowski <paul.kocialkowski@xxxxxxxxxxx>
> > ---
> >  drivers/media/platform/rockchip/rga/rga-hw.c | 18 +++++++++++-------
> >  1 file changed, 11 insertions(+), 7 deletions(-)
> > 
> > diff --git a/drivers/media/platform/rockchip/rga/rga-hw.c b/drivers/media/platform/rockchip/rga/rga-hw.c
> > index 4be6dcf292ff..cbffcf986ccf 100644
> > --- a/drivers/media/platform/rockchip/rga/rga-hw.c
> > +++ b/drivers/media/platform/rockchip/rga/rga-hw.c
> > @@ -216,13 +216,17 @@ static void rga_cmd_set_trans_info(struct rga_ctx *ctx)
> >  	}
> >  
> >  	if (ctx->out.fmt->hw_format >= RGA_COLOR_FMT_YUV422SP) {
> 
> Since we are already here touching this code, would you mind
> adding another patch, to do some cleaning first?
> 
> First, replace the nested ifs with a boolean operator.
> Then, introduce some IS_YUV (or IS_RGB) macro, making the above test
> more like IS_YUV(out_hw_format).
> 
> Finally, perhaps a comment along the lines of your commit message:
> 
> """
> Setting the output CSC mode is required for a YUV output,
> but must not be set when the input is also YUV.
> """
> 
> Details up to you :-)
> 
> After the clean-up patch, which would be just cosmetics,
> your fix should be cleaner and more clear.

All done in v3, thanks for the feedback :)

Cheers,

Paul

> Thanks,
> Ezequiel
>  
> > -		switch (ctx->out.colorspace) {
> > -		case V4L2_COLORSPACE_REC709:
> > -			dst_info.data.csc_mode = RGA_SRC_CSC_MODE_BT709_R0;
> > -			break;
> > -		default:
> > -			dst_info.data.csc_mode = RGA_DST_CSC_MODE_BT601_R0;
> > -			break;
> > +		if (ctx->in.fmt->hw_format < RGA_COLOR_FMT_YUV422SP) {
> > +			switch (ctx->out.colorspace) {
> > +			case V4L2_COLORSPACE_REC709:
> > +				dst_info.data.csc_mode =
> > +					RGA_SRC_CSC_MODE_BT709_R0;
> > +				break;
> > +			default:
> > +				dst_info.data.csc_mode =
> > +					RGA_DST_CSC_MODE_BT601_R0;
> > +				break;
> > +			}
> >  		}
> >  	}
> >  
> 
> 

-- 
Paul Kocialkowski, Bootlin
Embedded Linux and kernel engineering
https://bootlin.com

Attachment: signature.asc
Description: PGP signature