Re: [PATCH v2 2/3] media: uapi: Add VP9 stateless decoder controls
From: Ezequiel Garcia
Date: Fri May 01 2020 - 12:58:19 EST
Hi Hans,
Thanks a lot for your review, I'm preparing a new version.
On Thu, 2020-04-16 at 13:47 +0200, Hans Verkuil wrote:
> On 10/04/2020 13:51, Ezequiel Garcia wrote:
> > From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxx>
> >
> > Add the VP9 stateless decoder controls plus the documentation that goes
> > with it.
> >
> > Signed-off-by: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxx>
> > Signed-off-by: Ezequiel Garcia <ezequiel@xxxxxxxxxxxxx>
> > ---
> > Documentation/media/uapi/v4l/biblio.rst | 10 +
> > .../media/uapi/v4l/ext-ctrls-codec.rst | 584 ++++++++++++++++++
> > drivers/media/v4l2-core/v4l2-ctrls.c | 242 ++++++++
> > drivers/media/v4l2-core/v4l2-ioctl.c | 1 +
> > include/media/v4l2-ctrls.h | 1 +
> > include/media/vp9-ctrls.h | 515 +++++++++++++++
> > 6 files changed, 1353 insertions(+)
> > create mode 100644 include/media/vp9-ctrls.h
> >
> > diff --git a/Documentation/media/uapi/v4l/biblio.rst b/Documentation/media/uapi/v4l/biblio.rst
> > index 8095f57d3d75..f89341350b6d 100644
> > --- a/Documentation/media/uapi/v4l/biblio.rst
> > +++ b/Documentation/media/uapi/v4l/biblio.rst
> > @@ -414,3 +414,13 @@ VP8
> > :title: RFC 6386: "VP8 Data Format and Decoding Guide"
> >
> > :author: J. Bankoski et al.
> > +
> > +.. _vp9:
> > +
> > +VP9
> > +===
> > +
> > +
> > +:title: VP9 Bitstream & Decoding Process Specification
> > +
> > +:author: Adrian Grange (Google), Peter de Rivaz (Argon Design), Jonathan Hunt (Argon Design)
> > diff --git a/Documentation/media/uapi/v4l/ext-ctrls-codec.rst b/Documentation/media/uapi/v4l/ext-ctrls-codec.rst
> > index d4fc5f25aa14..fe4b03a512a4 100644
> > --- a/Documentation/media/uapi/v4l/ext-ctrls-codec.rst
> > +++ b/Documentation/media/uapi/v4l/ext-ctrls-codec.rst
> > @@ -2658,6 +2658,590 @@ enum v4l2_mpeg_video_h264_hierarchical_coding_type -
> > - ``padding[3]``
> > - Applications and drivers must set this to zero.
> >
> > +.. _v4l2-mpeg-vp9:
> > +
> > +``V4L2_CID_MPEG_VIDEO_VP9_FRAME_CONTEXT(0..3) (struct)``
> > + Stores VP9 probabilities attached to a specific frame context. The VP9
> > + specification allows using a maximum of 4 contexts. Each frame being
> > + decoded refers to one of those context. See section '7.1.2 Refresh
> > + probs semantics' section of :ref:`vp9` for more details about these
> > + contexts.
> > +
> > + This control is bi-directional:
> > +
> > + * all 4 contexts must be initialized by userspace just after the
> > + stream is started and before the first decoding request is submitted
> > + * the referenced context might be read by the kernel when a decoding
> > + request is submitted, and will be updated after the decoder is done
> > + decoding the frame ifthe V4L2_VP9_FRAME_FLAG_REFRESH_FRAME_CTX flag
>
> ifthe -> if the
>
> Add `` around V4L2_VP9_FRAME_FLAG_REFRESH_FRAME_CTX.
>
Oops, there are a bunch of this. Sorry about that.
> > + is set
> > + * contexts will be read back by user space before each decoding request
> > + to retrieve the updated probabilities
> > + * userspace will re-initialize the context to their default values when
> > + a reset context is required
> > +
> > + .. note::
> > +
> > + This compound control is not yet part of the public kernel API and
> > + it is expected to change.
> > +
> > +.. c:type:: v4l2_ctrl_vp9_frame_ctx
> > +
> > +.. cssclass:: longtable
> > +
> > +.. tabularcolumns:: |p{5.8cm}|p{4.8cm}|p{6.6cm}|
> > +
> > +.. flat-table:: struct v4l2_ctrl_vp9_frame_ctx
> > + :header-rows: 0
> > + :stub-columns: 0
> > + :widths: 1 1 2
> > +
> > + * - struct :c:type:`v4l2_vp9_probabilities`
> > + - ``probs``
> > + - Structure with VP9 probabilities attached to the context.
> > +
> > +.. c:type:: v4l2_vp9_probabilities
> > +
> > +.. cssclass:: longtable
> > +
> > +.. tabularcolumns:: |p{1.5cm}|p{6.3cm}|p{9.4cm}|
> > +
> > +.. flat-table:: struct v4l2_vp9_probabilities
> > + :header-rows: 0
> > + :stub-columns: 0
> > + :widths: 1 1 2
> > +
> > + * - __u8
> > + - ``tx8[2][1]``
> > + - TX 8x8 probabilities.
> > + * - __u8
> > + - ``tx16[2][2]``
> > + - TX 16x16 probabilities.
> > + * - __u8
> > + - ``tx32[2][3]``
> > + - TX 32x32 probabilities.
> > + * - __u8
> > + - ``coef[4][2][2][6][6][3]``
> > + - Coefficient probabilities.
> > + * - __u8
> > + - ``skip[3]``
> > + - Skip probabilities.
> > + * - __u8
> > + - ``inter_mode[7][3]``
> > + - Inter prediction mode probabilities.
> > + * - __u8
> > + - ``interp_filter[4][2]``
> > + - Interpolation filter probabilities.
> > + * - __u8
> > + - ``is_inter[4]``
> > + - Is inter-block probabilities.
> > + * - __u8
> > + - ``comp_mode[5]``
> > + - Compound prediction mode probabilities.
> > + * - __u8
> > + - ``single_ref[5][2]``
> > + - Single reference probabilities.
> > + * - __u8
> > + - ``comp_mode[5]``
> > + - Compound reference probabilities.
> > + * - __u8
> > + - ``y_mode[4][9]``
> > + - Y prediction mode probabilities.
> > + * - __u8
> > + - ``uv_mode[10][9]``
> > + - UV prediction mode probabilities.
> > + * - __u8
> > + - ``partition[16][3]``
> > + - Partition probabilities.
> > + * - __u8
> > + - ``mv.joint[3]``
> > + - Motion vector joint probabilities.
> > + * - __u8
> > + - ``mv.sign[2]``
> > + - Motion vector sign probabilities.
> > + * - __u8
> > + - ``mv.class[2][10]``
> > + - Motion vector class probabilities.
> > + * - __u8
> > + - ``mv.class0_bit[2]``
> > + - Motion vector class0 bit probabilities.
> > + * - __u8
> > + - ``mv.bits[2][10]``
> > + - Motion vector bits probabilities.
> > + * - __u8
> > + - ``mv.class0_fr[2][2][3]``
> > + - Motion vector class0 fractional bit probabilities.
> > + * - __u8
> > + - ``mv.fr[2][3]``
> > + - Motion vector fractional bit probabilities.
> > + * - __u8
> > + - ``mv.class0_hp[2]``
> > + - Motion vector class0 high precision fractional bit probabilities.
> > + * - __u8
> > + - ``mv.hp[2]``
> > + - Motion vector high precision fractional bit probabilities.
> > +
> > +``V4L2_CID_MPEG_VIDEO_VP9_FRAME_DECODE_PARAMS (struct)``
> > + Specifies the frame parameters for the associated VP9 frame decode request.
> > + This includes the necessary parameters for configuring a stateless hardware
> > + decoding pipeline for VP9. The bitstream parameters are defined according
> > + to :ref:`vp9`.
> > +
> > + .. note::
> > +
> > + This compound control is not yet part of the public kernel API and
> > + it is expected to change.
> > +
> > +.. c:type:: v4l2_ctrl_vp9_frame_decode_params
> > +
> > +.. cssclass:: longtable
> > +
> > +.. tabularcolumns:: |p{1.5cm}|p{6.3cm}|p{9.4cm}|
> > +
> > +.. flat-table:: struct v4l2_ctrl_vp9_frame_decode_params
> > + :header-rows: 0
> > + :stub-columns: 0
> > + :widths: 1 1 2
> > +
> > + * - __u32
> > + - ``flags``
> > + - Combination of V4L2_VP9_FRAME_FLAG_* flags. See
> > + :c:type:`v4l2_vp9_frame_flags`.
> > + * - __u16
> > + - ``compressed_header_size``
> > + - Compressed header size in bytes.
> > + * - __u16
> > + - ``uncompressed_header_size``
> > + - Uncompressed header size in bytes.
> > + * - __u8
> > + - ``profile``
> > + - VP9 profile. Can be 0, 1, 2 or 3.
> > + * - __u8
> > + - ``reset_frame_context``
> > + - Frame context that should be used/updated when decoding the frame.
> > + * - __u8
> > + - ``bit_depth``
> > + - Component depth in bits. Must be 8 for profile 0 and 1. Must 10 or 12
> > + for profile 2 and 3.
> > + * - __u8
> > + - ``color_space``
> > + - Specifies the color space of the stream. See V4L2_VP9_COLOR_SPACE_*
> > + values. See :c:type:`v4l2_vp9_color_space`
> > + * - __u8
> > + - ``interpolation_filter``
> > + - Specifies the filter selection used for performing inter prediction. See
> > + :c:type:`v4l2_vp9_interpolation_filter`.
> > + * - __u8
> > + - ``tile_cols_log2``
> > + - Specifies the base 2 logarithm of the width of each tile (where the
> > + width is measured in units of 8x8 blocks). Shall be less than or equal
> > + to 6.
> > + * - __u8
> > + - ``tile_rows_log2``
> > + - Specifies the base 2 logarithm of the height of each tile (where the
> > + height is measured in units of 8x8 blocks)
> > + * - __u8
> > + - ``tx_mode``
> > + - Specifies the TX mode. See :c:type:`v4l2_vp9_tx_mode`.
> > + * - __u8
> > + - ``reference_mode``
> > + - Specifies the type of inter prediction to be used. See
> > + :c:type:`v4l2_vp9_reference_mode`.
> > + * - __u8
> > + - ``padding``
> > + - Needed to make this struct 64 bit aligned. Shall be filled with zeros.
> > + * - __u16
> > + - ``frame_width_minus_1``
> > + - Add 1 to get the frame width expressed in pixels.
> > + * - __u16
> > + - ``frame_height_minus_1``
> > + - Add 1 to to get the frame height expressed in pixels.
> > + * - __u16
> > + - ``frame_width_minus_1``
> > + - Add 1 to to get the expected render width expressed in pixels. This is
> > + not used during the decoding process but might be used by HW scalers to
> > + prepare a frame that's ready for scanout.
> > + * - __u16
> > + - frame_height_minus_1
> > + - Add 1 to get the expected render height expressed in pixels. This is
> > + not used during the decoding process but might be used by HW scalers to
> > + prepare a frame that's ready for scanout.
> > + * - __u64
> > + - ``refs[3]``
> > + - Array of reference frame timestamps.
> > + * - struct :c:type:`v4l2_vp9_loop_filter`
> > + - ``lf``
> > + - Loop filter parameters. See struct :c:type:`v4l2_vp9_loop_filter.
>
> Missing ` at the end.
>
> > + * - struct :c:type:`v4l2_vp9_quantization`
> > + - ``quant``
> > + - Quantization parameters. See :c:type:`v4l2_vp9_quantization`.
> > + * - struct :c:type:`v4l2_vp9_segmentation`
> > + - ``seg``
> > + - Segmentation parameters. See :c:type:`v4l2_vp9_segmentation`.
> > + * - struct :c:type:`v4l2_vp9_probabilities`
> > + - ``probs``
> > + - Probabilities. See :c:type:`v4l2_vp9_probabilities`.
> > +
> > +.. c:type:: v4l2_vp9_frame_flags
> > +
> > +.. cssclass:: longtable
> > +
> > +.. tabularcolumns:: |p{1.5cm}|p{6.3cm}|p{9.4cm}|
> > +
> > +.. flat-table:: enum v4l2_vp9_frame_flags
> > + :header-rows: 0
> > + :stub-columns: 0
> > + :widths: 1 2
> > +
> > + * - ``V4L2_VP9_FRAME_FLAG_KEY_FRAME``
> > + - The frame is a key frame.
> > + * - ``V4L2_VP9_FRAME_FLAG_SHOW_FRAME`
>
> Missing ` at the end.
>
> > + - The frame should be displayed.
> > + * - ``V4L2_VP9_FRAME_FLAG_ERROR_RESILIENT``
> > + - The decoding should be error resilient.
> > + * - ``V4L2_VP9_FRAME_FLAG_INTRA_ONLY``
> > + - The frame does not reference other frames.
> > + * - ``V4L2_VP9_FRAME_FLAG_ALLOW_HIGH_PREC_MV``
> > + - the frame might can high precision motion vectors.
> > + * - ``V4L2_VP9_FRAME_FLAG_REFRESH_FRAME_CTX``
> > + - Frame context should be updated after decoding.
> > + * - ``V4L2_VP9_FRAME_FLAG_PARALLEL_DEC_MODE``
> > + - Parallel decoding is used.
> > + * - ``V4L2_VP9_FRAME_FLAG_X_SUBSAMPLING``
> > + - Vertical subsampling is enabled.
> > + * - ``V4L2_VP9_FRAME_FLAG_Y_SUBSAMPLING``
> > + - Horizontal subsampling is enabled.
> > + * - ``V4L2_VP9_FRAME_FLAG_COLOR_RANGE_FULL_SWING``
> > + - The full UV range is used.
> > +
> > +.. c:type:: v4l2_vp9_ref_id
> > +
> > +.. cssclass:: longtable
> > +
> > +.. tabularcolumns:: |p{1.5cm}|p{6.3cm}|p{9.4cm}|
> > +
> > +.. flat-table:: enum v4l2_vp9_ref_id
> > + :header-rows: 0
> > + :stub-columns: 0
> > + :widths: 1 2
> > +
> > + * - ``V4L2_REF_ID_LAST``
> > + - Last reference frame.
> > + * - V4L2_REF_ID_GOLDEN
> > + - Golden reference frame.
> > + * - V4L2_REF_ID_ALTREF
> > + - Alternative reference frame.
> > + * - V4L2_REF_ID_CNT
>
> These three V4L2_REF_ID_ defines should have `` as well.
>
> > + - Number of reference frames.
> > +
> > +.. c:type:: v4l2_vp9_tx_mode
> > +
> > +.. cssclass:: longtable
> > +
> > +.. tabularcolumns:: |p{1.5cm}|p{6.3cm}|p{9.4cm}|
> > +
> > +.. flat-table:: enum v4l2_vp9_tx_mode
> > + :header-rows: 0
> > + :stub-columns: 0
> > + :widths: 1 2
> > +
> > + * - ``V4L2_VP9_TX_MODE_ONLY_4X4``
> > + - Transform size is 4x4.
> > + * - ``V4L2_VP9_TX_MODE_ALLOW_8X8``
> > + - Transform size can be up to 8x8.
> > + * - ``V4L2_VP9_TX_MODE_ALLOW_16X16``
> > + - Transform size can be up to 16x16.
> > + * - ``V4L2_VP9_TX_MODE_ALLOW_32X32`
> > + - transform size can be up to 32x32.
> > + * - ``V4L2_VP9_TX_MODE_SELECT``
> > + - Bitstream contains transform size for each block.
> > +
> > +.. c:type:: v4l2_vp9_reference_mode
> > +
> > +.. cssclass:: longtable
> > +
> > +.. tabularcolumns:: |p{1.5cm}|p{6.3cm}|p{9.4cm}|
> > +
> > +.. flat-table:: enum v4l2_vp9_reference_mode
> > + :header-rows: 0
> > + :stub-columns: 0
> > + :widths: 1 2
> > +
> > + * - ``V4L2_VP9_REF_MODE_SINGLE``
> > + - Indicates that all the inter blocks use only a single reference frame
> > + to generate motion compensated prediction.
> > + * - ``V4L2_VP9_REF_MODE_COMPOUND``
> > + - Requires all the inter blocks to use compound mode. Single reference
> > + frame prediction is not allowed.
> > + * - ``V4L2_VP9_REF_MODE_SELECT``
> > + - Allows each individual inter block to select between single and
> > + compound prediction modes.
> > +
> > +.. c:type:: v4l2_vp9_interpolation_filter
> > +
> > +.. cssclass:: longtable
> > +
> > +.. tabularcolumns:: |p{1.5cm}|p{6.3cm}|p{9.4cm}|
> > +
> > +.. flat-table:: enum v4l2_vp9_interpolation_filter
> > + :header-rows: 0
> > + :stub-columns: 0
> > + :widths: 1 2
> > +
> > + * - ``V4L2_VP9_INTERP_FILTER_8TAP``
> > + - Height tap filter.
> > + * - ``V4L2_VP9_INTERP_FILTER_8TAP_SMOOTH``
> > + - Height tap smooth filter.
> > + * - ``V4L2_VP9_INTERP_FILTER_8TAP_SHARP``
> > + - Height tap sharp filter.
> > + * - ``V4L2_VP9_INTERP_FILTER_BILINEAR``
> > + - Bilinear filter.
> > + * - ``V4L2_VP9_INTERP_FILTER_SWITCHABLE``
> > + - Filter selection is signaled at the block level.
> > +
> > +.. c:type:: v4l2_vp9_color_space
> > +
> > +.. cssclass:: longtable
> > +
> > +.. tabularcolumns:: |p{1.5cm}|p{6.3cm}|p{9.4cm}|
> > +
> > +.. flat-table:: enum v4l2_vp9_color_space
> > + :header-rows: 0
> > + :stub-columns: 0
> > + :widths: 1 2
> > +
> > + * - ``V4L2_VP9_COLOR_SPACE_UNKNOWN``
> > + - Unknown color space. In this case the color space must be signaled
> > + outside the VP9 bitstream.
> > + * - ``V4L2_VP9_COLOR_SPACE_BT_601``
> > + - Rec. ITU-R BT.601-7 color space.
> > + * - ``V4L2_VP9_COLOR_SPACE_BT_709``
> > + - Rec. ITU-R BT.709-6 color space.
> > + * - ``V4L2_VP9_COLOR_SPACE_SMPTE_170``
> > + - SMPTE-170 color space.
> > + * - ``V4L2_VP9_COLOR_SPACE_SMPTE_240``
> > + - SMPTE-240 color space.
> > + * - ``V4L2_VP9_COLOR_SPACE_BT_2020``
> > + - Rec. ITU-R BT.2020-2 color space.
> > + * - ``V4L2_VP9_COLOR_SPACE_RESERVED``
> > + - Reserved. This value shall never be passed.
> > + * - ``V4L2_VP9_COLOR_SPACE_SRGB``
> > + - sRGB (IEC 61966-2-1) color space.
> > +
> > +.. c:type:: v4l2_vp9_reset_frame_context
> > +
> > +.. cssclass:: longtable
> > +
> > +.. tabularcolumns:: |p{1.5cm}|p{6.3cm}|p{9.4cm}|
> > +
> > +.. flat-table:: enum v4l2_vp9_reset_frame_context
> > + :header-rows: 0
> > + :stub-columns: 0
> > + :widths: 1 2
> > +
> > + * - ``V4L2_VP9_RESET_FRAME_CTX_NONE``
> > + - Do not reset any frame context.
> > + * - ``V4L2_VP9_RESET_FRAME_CTX_NONE_ALT``
> > + - Do not reset any frame context. This is an alternative value for
> > + V4L2_VP9_RESET_FRAME_CTX_NONE.
>
> Add `` around V4L2_VP9_RESET_FRAME_CTX_NONE.
>
Hm, now that I look closer, what's the point
of having the NONE_ALT in our uAPI if it
has same meaning as NONE?
I think it can be removed.
> > + * - ``V4L2_VP9_RESET_FRAME_CTX_SPEC``
> > + - Reset the frame context pointed by
> > + :c:type:`v4l2_ctrl_vp9_frame_decode_params`.frame_context_idx.
> > + * - ``V4L2_VP9_RESET_FRAME_CTX_ALL``
> > + - Reset all frame contexts.
> > +
> > +.. c:type:: v4l2_vp9_intra_prediction_mode
> > +
> > +.. cssclass:: longtable
> > +
> > +.. tabularcolumns:: |p{1.5cm}|p{6.3cm}|p{9.4cm}|
> > +
> > +.. flat-table:: enum v4l2_vp9_intra_prediction_mode
> > + :header-rows: 0
> > + :stub-columns: 0
> > + :widths: 1 2
> > +
> > + * - ``V4L2_VP9_INTRA_PRED_DC``
> > + - DC intra prediction.
> > + * - ``V4L2_VP9_INTRA_PRED_MODE_V``
> > + - Vertical intra prediction.
> > + * - ``V4L2_VP9_INTRA_PRED_MODE_H``
> > + - Horizontal intra prediction.
> > + * - ``V4L2_VP9_INTRA_PRED_MODE_D45``
> > + - D45 intra prediction.
> > + * - ``V4L2_VP9_INTRA_PRED_MODE_D135``
> > + - D135 intra prediction.
> > + * - ``V4L2_VP9_INTRA_PRED_MODE_D117``
> > + - D117 intra prediction.
> > + * - ``V4L2_VP9_INTRA_PRED_MODE_D153``
> > + - D153 intra prediction.
> > + * - ``V4L2_VP9_INTRA_PRED_MODE_D207``
> > + - D207 intra prediction.
> > + * - ``V4L2_VP9_INTRA_PRED_MODE_D63``
> > + - D63 intra prediction.
> > + * - ``V4L2_VP9_INTRA_PRED_MODE_TM``
> > + - True motion intra prediction.
> > +
> > +.. c:type:: v4l2_vp9_segmentation
> > +
> > +.. cssclass:: longtable
> > +
> > +.. tabularcolumns:: |p{1.5cm}|p{6.3cm}|p{9.4cm}|
> > +
> > +.. flat-table:: struct v4l2_vp9_segmentation
> > + :header-rows: 0
> > + :stub-columns: 0
> > + :widths: 1 1 2
> > +
> > + * - __u8
> > + - ``flags``
> > + - Combination of V4L2_VP9_SEGMENTATION_FLAG_* flags. See
> > + :c:type:`v4l2_vp9_segmentation_flags`.
> > + * - __u8
> > + - ``tree_probs[7]``
> > + - Specifies the probability values to be used when decoding segment_id.
> > + * - __u8
> > + - ``pred_prob[3]``
> > + - Specifies the probability values to be used when decoding
> > + seg_id_predicte.
> > + * - __u8
> > + - ``padding[5]``
> > + - Used to align this struct on 64 bit. Shall be filled with zeros.
> > + * - __u8
> > + - ``feature_enabled[8]``
> > + - Bitmask defining which features are enabled in each segment.
> > + * - __u8
> > + - ``feature_data[8][4]``
> > + - Data attached to each feature. Data entry is only valid if the feature
> > + is enabled.
> > +
> > +.. c:type:: v4l2_vp9_segment_feature
> > +
> > +.. cssclass:: longtable
> > +
> > +.. tabularcolumns:: |p{1.5cm}|p{6.3cm}|p{9.4cm}|
> > +
> > +.. flat-table:: enum v4l2_vp9_segment_feature
> > + :header-rows: 0
> > + :stub-columns: 0
> > + :widths: 1 2
> > +
> > + * - ``V4L2_VP9_SEGMENT_FEATURE_QP_DELTA``
> > + - QP delta segment feature.
> > + * - ``V4L2_VP9_SEGMENT_FEATURE_LF``
> > + - Loop filter segment feature.
> > + * - ``V4L2_VP9_SEGMENT_FEATURE_REF_FRAME``
> > + - Reference frame segment feature.
> > + * - ``V4L2_VP9_SEGMENT_FEATURE_SKIP``
> > + - Skip segment feature.
> > + * - ``V4L2_VP9_SEGMENT_FEATURE_CNT``
> > + - Number of segment features.
> > +
> > +.. c:type:: v4l2_vp9_segmentation_flags
> > +
> > +.. cssclass:: longtable
> > +
> > +.. tabularcolumns:: |p{1.5cm}|p{6.3cm}|p{9.4cm}|
> > +
> > +.. flat-table:: enum v4l2_vp9_segmentation_flags
> > + :header-rows: 0
> > + :stub-columns: 0
> > + :widths: 1 2
> > +
> > + * - ``V4L2_VP9_SEGMENTATION_FLAG_ENABLED``
> > + - Indicates that this frame makes use of the segmentation tool.
> > + * - ``V4L2_VP9_SEGMENTATION_FLAG_UPDATE_MAP``
> > + - Indicates that the segmentation map should be updated during the
> > + decoding of this frame.
> > + * - ``V4L2_VP9_SEGMENTATION_FLAG_TEMPORAL_UPDATE``
> > + - Indicates that the updates to the segmentation map are coded
> > + relative to the existing segmentation map.
> > + * - ``V4L2_VP9_SEGMENTATION_FLAG_UPDATE_DATA``
> > + - Indicates that new parameters are about to be specified for each
> > + segment.
> > + * - ``V4L2_VP9_SEGMENTATION_FLAG_ABS_OR_DELTA_UPDATE``
> > + - Indicates that the segmentation parameters represent the actual values
> > + to be used.
> > +
> > +.. c:type:: v4l2_vp9_quantization
> > +
> > +.. cssclass:: longtable
> > +
> > +.. tabularcolumns:: |p{1.5cm}|p{6.3cm}|p{9.4cm}|
> > +
> > +.. flat-table:: struct v4l2_vp9_quantization
> > + :header-rows: 0
> > + :stub-columns: 0
> > + :widths: 1 1 2
> > +
> > + * - __u8
> > + - ``base_q_idx``
> > + - Indicates the base frame qindex.
> > + * - __s8
> > + - ``delta_q_y_dc``
> > + - Indicates the Y DC quantizer relative to base_q_idx.
> > + * - __s8
> > + - ``delta_q_uv_dc``
> > + - Indicates the UV DC quantizer relative to base_q_idx.
> > + * - __s8
> > + - ``delta_q_uv_ac``
> > + - Indicates the UV AC quantizer relative to base_q_idx.
> > + * - __u8
> > + - ``padding[4]``
> > + - Padding bytes used to align this struct on 64 bit. Must be set to 0.
> > +
> > +.. c:type:: v4l2_vp9_loop_filter
> > +
> > +.. cssclass:: longtable
> > +
> > +.. tabularcolumns:: |p{1.5cm}|p{6.3cm}|p{9.4cm}|
> > +
> > +.. flat-table:: struct v4l2_vp9_loop_filter
> > + :header-rows: 0
> > + :stub-columns: 0
> > + :widths: 1 1 2
> > +
> > + * - __u8
> > + - ``flags``
> > + - Combination of V4L2_VP9_LOOP_FILTER_FLAG_* flags.
> > + See :c:type:`v4l2_vp9_loop_filter_flags`.
> > + * - __u8
> > + - ``level``
> > + - Indicates the loop filter strength.
> > + * - __u8
> > + - ``sharpness``
> > + - Indicates the sharpness level.
> > + * - __s8
> > + - ``ref_deltas[4]``
> > + - Contains the adjustment needed for the filter level based on the chosen
> > + reference frame.
> > + * - __s8
> > + - ``mode_deltas[2]``
> > + - Contains the adjustment needed for the filter level based on the chosen
> > + mode
> > + * - __u8
> > + - ``lvl_lookup[8][4][2]``
> > + - Level lookup table.
> > +
> > +
> > +.. c:type:: v4l2_vp9_loop_filter_flags
> > +
> > +.. cssclass:: longtable
> > +
> > +.. tabularcolumns:: |p{1.5cm}|p{6.3cm}|p{9.4cm}|
> > +
> > +.. flat-table:: enum v4l2_vp9_loop_filter_flags
> > + :header-rows: 0
> > + :stub-columns: 0
> > + :widths: 1 2
> > +
> > + * - ``V4L2_VP9_LOOP_FILTER_FLAG_DELTA_ENABLED``
> > + - When set, the filter level depends on the mode and reference frame used
> > + to predict a block.
> > + * - ``V4L2_VP9_LOOP_FILTER_FLAG_DELTA_UPDATE``
> > + - When set, the bitstream contains additional syntax elements that
> > + specify which mode and reference frame deltas are to be updated.
> > +
> > .. raw:: latex
> >
> > \normalsize
> > diff --git a/drivers/media/v4l2-core/v4l2-ctrls.c b/drivers/media/v4l2-core/v4l2-ctrls.c
> > index 9a8445a9e788..69f43a4a9815 100644
> > --- a/drivers/media/v4l2-core/v4l2-ctrls.c
> > +++ b/drivers/media/v4l2-core/v4l2-ctrls.c
> > @@ -925,6 +925,11 @@ const char *v4l2_ctrl_get_name(u32 id)
> > case V4L2_CID_MPEG_VIDEO_VP8_PROFILE: return "VP8 Profile";
> > case V4L2_CID_MPEG_VIDEO_VP9_PROFILE: return "VP9 Profile";
> > case V4L2_CID_MPEG_VIDEO_VP8_FRAME_HEADER: return "VP8 Frame Header";
> > + case V4L2_CID_MPEG_VIDEO_VP9_FRAME_DECODE_PARAMS: return "VP9 Frame Decode Parameters";
> > + case V4L2_CID_MPEG_VIDEO_VP9_FRAME_CONTEXT(0): return "VP9 Frame Context 0";
> > + case V4L2_CID_MPEG_VIDEO_VP9_FRAME_CONTEXT(1): return "VP9 Frame Context 1";
> > + case V4L2_CID_MPEG_VIDEO_VP9_FRAME_CONTEXT(2): return "VP9 Frame Context 2";
> > + case V4L2_CID_MPEG_VIDEO_VP9_FRAME_CONTEXT(3): return "VP9 Frame Context 3";
> >
> > /* HEVC controls */
> > case V4L2_CID_MPEG_VIDEO_HEVC_I_FRAME_QP: return "HEVC I-Frame QP Value";
> > @@ -1398,6 +1403,15 @@ void v4l2_ctrl_fill(u32 id, const char **name, enum v4l2_ctrl_type *type,
> > case V4L2_CID_MPEG_VIDEO_VP8_FRAME_HEADER:
> > *type = V4L2_CTRL_TYPE_VP8_FRAME_HEADER;
> > break;
> > + case V4L2_CID_MPEG_VIDEO_VP9_FRAME_DECODE_PARAMS:
> > + *type = V4L2_CTRL_TYPE_VP9_FRAME_DECODE_PARAMS;
> > + break;
> > + case V4L2_CID_MPEG_VIDEO_VP9_FRAME_CONTEXT(0):
> > + case V4L2_CID_MPEG_VIDEO_VP9_FRAME_CONTEXT(1):
> > + case V4L2_CID_MPEG_VIDEO_VP9_FRAME_CONTEXT(2):
> > + case V4L2_CID_MPEG_VIDEO_VP9_FRAME_CONTEXT(3):
> > + *type = V4L2_CTRL_TYPE_VP9_FRAME_CONTEXT;
> > + break;
> > case V4L2_CID_MPEG_VIDEO_HEVC_SPS:
> > *type = V4L2_CTRL_TYPE_HEVC_SPS;
> > break;
> > @@ -1698,6 +1712,222 @@ static void std_log(const struct v4l2_ctrl *ctrl)
> > 0; \
> > })
> >
> > +static int
> > +validate_vp9_lf_params(struct v4l2_vp9_loop_filter *lf)
> > +{
> > + unsigned int i, j, k;
> > +
> > + if (lf->flags &
> > + ~(V4L2_VP9_LOOP_FILTER_FLAG_DELTA_ENABLED |
> > + V4L2_VP9_LOOP_FILTER_FLAG_DELTA_UPDATE))
> > + return -EINVAL;
> > +
> > + /*
> > + * V4L2_VP9_LOOP_FILTER_FLAG_DELTA_ENABLED implies
> > + * V4L2_VP9_LOOP_FILTER_FLAG_DELTA_UPDATE.
> > + */
> > + if (lf->flags & V4L2_VP9_LOOP_FILTER_FLAG_DELTA_UPDATE &&
> > + !(lf->flags & V4L2_VP9_LOOP_FILTER_FLAG_DELTA_ENABLED))
> > + return -EINVAL;
> > +
> > + /* That all values are in the accepted range. */
> > + if (lf->level > GENMASK(5, 0))
> > + return -EINVAL;
> > +
> > + if (lf->sharpness > GENMASK(2, 0))
> > + return -EINVAL;
> > +
> > + for (i = 0; i < ARRAY_SIZE(lf->ref_deltas); i++) {
> > + if (lf->ref_deltas[i] < -63 || lf->ref_deltas[i] > 63)
> > + return -EINVAL;
> > + }
> > +
> > + for (i = 0; i < ARRAY_SIZE(lf->mode_deltas); i++) {
> > + if (lf->mode_deltas[i] < -63 || lf->mode_deltas[i] > 63)
> > + return -EINVAL;
> > + }
> > +
> > + for (i = 0; i < ARRAY_SIZE(lf->lvl_lookup); i++) {
> > + for (j = 0; j < ARRAY_SIZE(lf->lvl_lookup[0]); j++) {
> > + for (k = 0; k < ARRAY_SIZE(lf->lvl_lookup[0][0]); k++) {
> > + if (lf->lvl_lookup[i][j][k] > 63)
> > + return -EINVAL;
> > + }
> > + }
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +static int
> > +validate_vp9_quant_params(struct v4l2_vp9_quantization *quant)
> > +{
> > + if (quant->delta_q_y_dc < -15 || quant->delta_q_y_dc > 15 ||
> > + quant->delta_q_uv_dc < -15 || quant->delta_q_uv_dc > 15 ||
> > + quant->delta_q_uv_ac < -15 || quant->delta_q_uv_ac > 15)
> > + return -EINVAL;
> > +
> > + memset(quant->padding, 0, sizeof(quant->padding));
> > + return 0;
> > +}
> > +
> > +static int
> > +validate_vp9_seg_params(struct v4l2_vp9_segmentation *seg)
> > +{
> > + unsigned int i, j;
> > +
> > + if (seg->flags &
> > + ~(V4L2_VP9_SEGMENTATION_FLAG_ENABLED |
> > + V4L2_VP9_SEGMENTATION_FLAG_UPDATE_MAP |
> > + V4L2_VP9_SEGMENTATION_FLAG_TEMPORAL_UPDATE |
> > + V4L2_VP9_SEGMENTATION_FLAG_UPDATE_DATA |
> > + V4L2_VP9_SEGMENTATION_FLAG_ABS_OR_DELTA_UPDATE))
> > + return -EINVAL;
> > +
> > + /*
> > + * V4L2_VP9_SEGMENTATION_FLAG_UPDATE_MAP and
> > + * V4L2_VP9_SEGMENTATION_FLAG_UPDATE_DATA imply
> > + * V4L2_VP9_SEGMENTATION_FLAG_ENABLED.
> > + */
> > + if ((seg->flags &
> > + (V4L2_VP9_SEGMENTATION_FLAG_UPDATE_MAP |
> > + V4L2_VP9_SEGMENTATION_FLAG_UPDATE_DATA)) &&
> > + !(seg->flags & V4L2_VP9_SEGMENTATION_FLAG_ENABLED))
> > + return -EINVAL;
> > +
> > + /*
> > + * V4L2_VP9_SEGMENTATION_FLAG_TEMPORAL_UPDATE implies
> > + * V4L2_VP9_SEGMENTATION_FLAG_UPDATE_MAP.
> > + */
> > + if (seg->flags & V4L2_VP9_SEGMENTATION_FLAG_TEMPORAL_UPDATE &&
> > + !(seg->flags & V4L2_VP9_SEGMENTATION_FLAG_UPDATE_MAP))
> > + return -EINVAL;
> > +
> > + /*
> > + * V4L2_VP9_SEGMENTATION_FLAG_ABS_OR_DELTA_UPDATE implies
> > + * V4L2_VP9_SEGMENTATION_FLAG_UPDATE_DATA.
> > + */
> > + if (seg->flags & V4L2_VP9_SEGMENTATION_FLAG_ABS_OR_DELTA_UPDATE &&
> > + !(seg->flags & V4L2_VP9_SEGMENTATION_FLAG_UPDATE_DATA))
> > + return -EINVAL;
> > +
> > + for (i = 0; i < ARRAY_SIZE(seg->feature_enabled); i++) {
> > + if (seg->feature_enabled[i] &
> > + ~(V4L2_VP9_SEGMENT_FEATURE_QP_DELTA |
> > + V4L2_VP9_SEGMENT_FEATURE_LF |
> > + V4L2_VP9_SEGMENT_FEATURE_REF_FRAME |
> > + V4L2_VP9_SEGMENT_FEATURE_SKIP))
> > + return -EINVAL;
> > + }
> > +
> > + for (i = 0; i < ARRAY_SIZE(seg->feature_data); i++) {
> > + const int range[] = {255, 63, 3, 0};
> > +
> > + for (j = 0; j < ARRAY_SIZE(seg->feature_data[j]); j++) {
> > + if (seg->feature_data[i][j] < -range[j] ||
> > + seg->feature_data[i][j] > range[j])
> > + return -EINVAL;
> > + }
> > + }
> > +
> > + memset(seg->padding, 0, sizeof(seg->padding));
> > + return 0;
> > +}
> > +
> > +static int
> > +validate_vp9_frame_decode_params(struct v4l2_ctrl_vp9_frame_decode_params *dec_params)
> > +{
> > + int ret;
> > +
> > + /* Make sure we're not passed invalid flags. */
> > + if (dec_params->flags &
> > + ~(V4L2_VP9_FRAME_FLAG_KEY_FRAME |
> > + V4L2_VP9_FRAME_FLAG_SHOW_FRAME |
> > + V4L2_VP9_FRAME_FLAG_ERROR_RESILIENT |
> > + V4L2_VP9_FRAME_FLAG_INTRA_ONLY |
> > + V4L2_VP9_FRAME_FLAG_ALLOW_HIGH_PREC_MV |
> > + V4L2_VP9_FRAME_FLAG_REFRESH_FRAME_CTX |
> > + V4L2_VP9_FRAME_FLAG_PARALLEL_DEC_MODE |
> > + V4L2_VP9_FRAME_FLAG_X_SUBSAMPLING |
> > + V4L2_VP9_FRAME_FLAG_Y_SUBSAMPLING |
> > + V4L2_VP9_FRAME_FLAG_COLOR_RANGE_FULL_SWING))
> > + return -EINVAL;
> > +
> > + /*
> > + * The refresh context and error resilient flags are mutually exclusive.
> > + * Same goes for parallel decoding and error resilient modes.
> > + */
> > + if (dec_params->flags & V4L2_VP9_FRAME_FLAG_ERROR_RESILIENT &&
> > + dec_params->flags &
> > + (V4L2_VP9_FRAME_FLAG_REFRESH_FRAME_CTX |
> > + V4L2_VP9_FRAME_FLAG_PARALLEL_DEC_MODE))
> > + return -EINVAL;
> > +
> > + if (dec_params->profile > V4L2_VP9_PROFILE_MAX)
> > + return -EINVAL;
> > +
> > + if (dec_params->reset_frame_context > V4L2_VP9_RESET_FRAME_CTX_ALL)
> > + return -EINVAL;
> > +
> > + if (dec_params->frame_context_idx >= V4L2_VP9_NUM_FRAME_CTX)
> > + return -EINVAL;
> > +
> > + /*
> > + * Profiles 0 and 1 only support 8-bit depth, profiles 2 and 3 only 10
> > + * and 12 bit depths.
> > + */
> > + if ((dec_params->profile < 2 && dec_params->bit_depth != 8) ||
> > + (dec_params->profile >= 2 &&
> > + (dec_params->bit_depth != 10 || dec_params->bit_depth != 12)))
> > > should be && (was a smatch warning, it took me a while before I saw what the
> problem was :-) )
>
> > + return -EINVAL;
> > +
> > + /* Profile 0 and 2 only accept YUV 4:2:0. */
> > + if ((dec_params->profile == 0 || dec_params->profile == 2) &&
> > + (!(dec_params->flags & V4L2_VP9_FRAME_FLAG_X_SUBSAMPLING) ||
> > + !(dec_params->flags & V4L2_VP9_FRAME_FLAG_Y_SUBSAMPLING)))
> > + return -EINVAL;
> > +
> > + /* Profile 1 and 3 only accept YUV 4:2:2, 4:4:0 and 4:4:4. */
> > + if ((dec_params->profile == 1 || dec_params->profile == 3) &&
> > + ((dec_params->flags & V4L2_VP9_FRAME_FLAG_X_SUBSAMPLING) &&
> > + (dec_params->flags & V4L2_VP9_FRAME_FLAG_Y_SUBSAMPLING)))
> > + return -EINVAL;
> > +
> > + if (dec_params->color_space > V4L2_VP9_COLOR_SPACE_SRGB)
> > + return -EINVAL;
> > +
> > + if (dec_params->interpolation_filter > V4L2_VP9_INTERP_FILTER_SWITCHABLE)
> > + return -EINVAL;
> > +
> > + /*
> > + * According to the spec, tile_cols_log2 shall be less than or equal
> > + * to 6.
> > + */
> > + if (dec_params->tile_cols_log2 > 6)
> > + return -EINVAL;
> > +
> > + if (dec_params->tx_mode > V4L2_VP9_TX_MODE_SELECT)
> > + return -EINVAL;
> > +
> > + if (dec_params->reference_mode > V4L2_VP9_REF_MODE_SELECT)
> > + return -EINVAL;
> > +
> > + ret = validate_vp9_lf_params(&dec_params->lf);
> > + if (ret)
> > + return ret;
> > +
> > + ret = validate_vp9_quant_params(&dec_params->quant);
> > + if (ret)
> > + return ret;
> > +
> > + ret = validate_vp9_seg_params(&dec_params->seg);
> > + if (ret)
> > + return ret;
> > +
> > + memset(dec_params->padding, 0, sizeof(dec_params->padding));
> > + return 0;
> > +}
> > +
> > /* Validate a new control */
> >
> > #define zero_padding(s) \
> > @@ -1794,6 +2024,12 @@ static int std_validate_compound(const struct v4l2_ctrl *ctrl, u32 idx,
> > zero_padding(p_vp8_frame_header->coder_state);
> > break;
> >
> > + case V4L2_CTRL_TYPE_VP9_FRAME_DECODE_PARAMS:
> > + return validate_vp9_frame_decode_params(p);
> > +
> > + case V4L2_CTRL_TYPE_VP9_FRAME_CONTEXT:
> > + break;
> > +
> > case V4L2_CTRL_TYPE_HEVC_SPS:
> > p_hevc_sps = p;
> >
> > @@ -2537,6 +2773,12 @@ static struct v4l2_ctrl *v4l2_ctrl_new(struct v4l2_ctrl_handler *hdl,
> > case V4L2_CTRL_TYPE_VP8_FRAME_HEADER:
> > elem_size = sizeof(struct v4l2_ctrl_vp8_frame_header);
> > break;
> > + case V4L2_CTRL_TYPE_VP9_FRAME_CONTEXT:
> > + elem_size = sizeof(struct v4l2_ctrl_vp9_frame_ctx);
> > + break;
> > + case V4L2_CTRL_TYPE_VP9_FRAME_DECODE_PARAMS:
> > + elem_size = sizeof(struct v4l2_ctrl_vp9_frame_decode_params);
> > + break;
> > case V4L2_CTRL_TYPE_HEVC_SPS:
> > elem_size = sizeof(struct v4l2_ctrl_hevc_sps);
> > break;
> > diff --git a/drivers/media/v4l2-core/v4l2-ioctl.c b/drivers/media/v4l2-core/v4l2-ioctl.c
> > index b2ef8e60ea7d..baa50388f8de 100644
> > --- a/drivers/media/v4l2-core/v4l2-ioctl.c
> > +++ b/drivers/media/v4l2-core/v4l2-ioctl.c
> > @@ -1371,6 +1371,7 @@ static void v4l_fill_fmtdesc(struct v4l2_fmtdesc *fmt)
> > case V4L2_PIX_FMT_VP8: descr = "VP8"; break;
> > case V4L2_PIX_FMT_VP8_FRAME: descr = "VP8 Frame"; break;
> > case V4L2_PIX_FMT_VP9: descr = "VP9"; break;
> > + case V4L2_PIX_FMT_VP9_FRAME: descr = "VP9 Frame"; break;
> > case V4L2_PIX_FMT_HEVC: descr = "HEVC"; break; /* aka H.265 */
> > case V4L2_PIX_FMT_HEVC_SLICE: descr = "HEVC Parsed Slice Data"; break;
> > case V4L2_PIX_FMT_FWHT: descr = "FWHT"; break; /* used in vicodec */
> > diff --git a/include/media/v4l2-ctrls.h b/include/media/v4l2-ctrls.h
> > index 30c3be7f5efc..b69521b96968 100644
> > --- a/include/media/v4l2-ctrls.h
> > +++ b/include/media/v4l2-ctrls.h
> > @@ -21,6 +21,7 @@
> > #include <media/fwht-ctrls.h>
> > #include <media/h264-ctrls.h>
> > #include <media/vp8-ctrls.h>
> > +#include <media/vp9-ctrls.h>
> > #include <media/hevc-ctrls.h>
> >
> > /* forward references */
> > diff --git a/include/media/vp9-ctrls.h b/include/media/vp9-ctrls.h
> > new file mode 100644
> > index 000000000000..f9435890763d
> > --- /dev/null
> > +++ b/include/media/vp9-ctrls.h
> > @@ -0,0 +1,515 @@
> > +/* SPDX-License-Identifier: GPL-2.0 */
> > +/*
> > + * These are the VP9 state controls for use with stateless VP9
> > + * codec drivers.
> > + *
> > + * It turns out that these structs are not stable yet and will undergo
> > + * more changes. So keep them private until they are stable and ready to
> > + * become part of the official public API.
> > + */
> > +
> > +#ifndef _VP9_CTRLS_H_
> > +#define _VP9_CTRLS_H_
> > +
> > +#include <linux/types.h>
> > +
> > +#define V4L2_PIX_FMT_VP9_FRAME v4l2_fourcc('V', 'P', '9', 'F')
> > +
> > +#define V4L2_CID_MPEG_VIDEO_VP9_FRAME_CONTEXT(i) (V4L2_CID_MPEG_BASE + 4000 + (i))
> > +#define V4L2_CID_MPEG_VIDEO_VP9_FRAME_DECODE_PARAMS (V4L2_CID_MPEG_BASE + 4004)
> > +#define V4L2_CTRL_TYPE_VP9_FRAME_CONTEXT 0x400
> > +#define V4L2_CTRL_TYPE_VP9_FRAME_DECODE_PARAMS 0x404
> > +
> > +/**
> > + * enum v4l2_vp9_loop_filter_flags - VP9 loop filter flags
> > + *
> > + * @V4L2_VP9_LOOP_FILTER_FLAG_DELTA_ENABLED: the filter level depends on
> > + * the mode and reference frame used
> > + * to predict a block
> > + * @V4L2_VP9_LOOP_FILTER_FLAG_DELTA_UPDATE: the bitstream contains additional
> > + * syntax elements that specify which
> > + * mode and reference frame deltas
> > + * are to be updated
> > + *
> > + * Those are the flags you should pass to &v4l2_vp9_loop_filter.flags. See
> > + * section '7.2.8 Loop filter semantics' of the VP9 specification for more
> > + * details.
> > + */
> > +enum v4l2_vp9_loop_filter_flags {
> > + V4L2_VP9_LOOP_FILTER_FLAG_DELTA_ENABLED = 1 << 0,
> > + V4L2_VP9_LOOP_FILTER_FLAG_DELTA_UPDATE = 1 << 1,
> > +};
> > +
> > +/**
> > + * struct v4l2_vp9_loop_filter - VP9 loop filter parameters
> > + *
> > + * @flags: combination of V4L2_VP9_LOOP_FILTER_FLAG_* flags
> > + * @level: indicates the loop filter strength
> > + * @sharpness: indicates the sharpness level
> > + * @ref_deltas: contains the adjustment needed for the filter level based on
> > + * the chosen reference frame
> > + * @mode_deltas: contains the adjustment needed for the filter level based on
> > + * the chosen mode
> > + * @lvl_lookup: level lookup table
> > + *
> > + * This structure contains all loop filter related parameters. See sections
> > + * '7.2.8 Loop filter semantics' and '8.8.1 Loop filter frame init process'
> > + * of the VP9 specification for more details.
> > + */
> > +struct v4l2_vp9_loop_filter {
> > + __u8 flags;
> > + __u8 level;
> > + __u8 sharpness;
> > + __s8 ref_deltas[4];
> > + __s8 mode_deltas[2];
> > + __u8 lvl_lookup[8][4][2];
> > +};
> > +
> > +/**
> > + * struct v4l2_vp9_quantization - VP9 quantization parameters
> > + *
> > + * @base_q_idx: indicates the base frame qindex
> > + * @delta_q_y_dc: indicates the Y DC quantizer relative to base_q_idx
> > + * @delta_q_uv_dc: indicates the UV DC quantizer relative to base_q_idx
> > + * @delta_q_uv_ac indicates the UV AC quantizer relative to base_q_idx
> > + * @padding: padding bytes to align things on 64 bits. Must be set to 0
> > + *
> > + * Encodes the quantization parameters. See section '7.2.9 Quantization params
> > + * syntax' of the VP9 specification for more details.
> > + */
> > +struct v4l2_vp9_quantization {
> > + __u8 base_q_idx;
> > + __s8 delta_q_y_dc;
> > + __s8 delta_q_uv_dc;
> > + __s8 delta_q_uv_ac;
> > + __u8 padding[4];
> > +};
> > +
> > +/**
> > + * enum v4l2_vp9_segmentation_flags - VP9 segmentation flags
> > + *
> > + * @V4L2_VP9_SEGMENTATION_FLAG_ENABLED: indicates that this frame makes use of
> > + * the segmentation tool
> > + * @V4L2_VP9_SEGMENTATION_FLAG_UPDATE_MAP: indicates that the segmentation map
> > + * should be updated during the
> > + * decoding of this frame
> > + * @V4L2_VP9_SEGMENTATION_FLAG_TEMPORAL_UPDATE: indicates that the updates to
> > + * the segmentation map are coded
> > + * relative to the existing
> > + * segmentation map
> > + * @V4L2_VP9_SEGMENTATION_FLAG_UPDATE_DATA: indicates that new parameters are
> > + * about to be specified for each
> > + * segment
> > + * @V4L2_VP9_SEGMENTATION_FLAG_ABS_OR_DELTA_UPDATE: indicates that the
> > + * segmentation parameters
> > + * represent the actual values
> > + * to be used
> > + *
> > + * Those are the flags you should pass to &v4l2_vp9_segmentation.flags. See
> > + * section '7.2.10 Segmentation params syntax' of the VP9 specification for
> > + * more details.
> > + */
> > +enum v4l2_vp9_segmentation_flags {
> > + V4L2_VP9_SEGMENTATION_FLAG_ENABLED = 1 << 0,
> > + V4L2_VP9_SEGMENTATION_FLAG_UPDATE_MAP = 1 << 1,
> > + V4L2_VP9_SEGMENTATION_FLAG_TEMPORAL_UPDATE = 1 << 2,
> > + V4L2_VP9_SEGMENTATION_FLAG_UPDATE_DATA = 1 << 3,
> > + V4L2_VP9_SEGMENTATION_FLAG_ABS_OR_DELTA_UPDATE = 1 << 4,
> > +};
> > +
> > +#define V4L2_VP9_SEGMENT_FEATURE_ENABLED(id) (1 << (id))
> > +#define V4L2_VP9_SEGMENT_FEATURE_ENABLED_MASK 0xf
> > +
> > +/**
> > + * enum v4l2_vp9_segment_feature - VP9 segment feature IDs
> > + *
> > + * @V4L2_VP9_SEGMENT_FEATURE_QP_DELTA: QP delta segment feature
> > + * @V4L2_VP9_SEGMENT_FEATURE_LF: loop filter segment feature
> > + * @V4L2_VP9_SEGMENT_FEATURE_REF_FRAME: reference frame segment feature
> > + * @V4L2_VP9_SEGMENT_FEATURE_SKIP: skip segment feature
> > + * @V4L2_VP9_SEGMENT_FEATURE_CNT: number of segment features
> > + *
> > + * Segment feature IDs. See section '7.2.10 Segmentation params syntax' of the
> > + * VP9 specification for more details.
> > + */
> > +enum v4l2_vp9_segment_feature {
> > + V4L2_VP9_SEGMENT_FEATURE_QP_DELTA,
> > + V4L2_VP9_SEGMENT_FEATURE_LF,
> > + V4L2_VP9_SEGMENT_FEATURE_REF_FRAME,
> > + V4L2_VP9_SEGMENT_FEATURE_SKIP,
> > + V4L2_VP9_SEGMENT_FEATURE_CNT,
> > +};
> > +
> > +/**
> > + * struct v4l2_vp9_segmentation - VP9 segmentation parameters
> > + *
> > + * @flags: combination of V4L2_VP9_SEGMENTATION_FLAG_* flags
> > + * @tree_probs: specify the probability values to be used when decoding
> > + * segment_id
> > + * @pred_prob: specify the probability values to be used when decoding
> > + * seg_id_predicte
> > + * @padding: padding used to make things aligned on 64 bits. Shall be zero
> > + * filled
> > + * @feature_enabled: bitmask defining which features are enabled in each
> > + * segment
> > + * @feature_data: data attached to each feature. Data entry is only valid if
> > + * the feature is enabled
> > + *
> > + * Encodes the quantization parameters. See section '7.2.10 Segmentation
> > + * params syntax' of the VP9 specification for more details.
> > + */
> > +struct v4l2_vp9_segmentation {
> > + __u8 flags;
> > + __u8 tree_probs[7];
> > + __u8 pred_probs[3];
> > + __u8 padding[5];
> > + __u8 feature_enabled[8];
> > + __s16 feature_data[8][4];
> > +};
> > +
> > +/**
> > + * enum v4l2_vp9_intra_prediction_mode - VP9 Intra prediction modes
> > + *
> > + * @V4L2_VP9_INTRA_PRED_DC: DC intra prediction
> > + * @V4L2_VP9_INTRA_PRED_MODE_V: vertical intra prediction
> > + * @V4L2_VP9_INTRA_PRED_MODE_H: horizontal intra prediction
> > + * @V4L2_VP9_INTRA_PRED_MODE_D45: D45 intra prediction
> > + * @V4L2_VP9_INTRA_PRED_MODE_D135: D135 intra prediction
> > + * @V4L2_VP9_INTRA_PRED_MODE_D117: D117 intra prediction
> > + * @V4L2_VP9_INTRA_PRED_MODE_D153: D153 intra prediction
> > + * @V4L2_VP9_INTRA_PRED_MODE_D207: D207 intra prediction
> > + * @V4L2_VP9_INTRA_PRED_MODE_D63: D63 intra prediction
> > + * @V4L2_VP9_INTRA_PRED_MODE_TM: True Motion intra prediction
> > + *
> > + * See section '7.4.5 Intra frame mode info semantics' for more details.
> > + */
> > +enum v4l2_vp9_intra_prediction_mode {
> > + V4L2_VP9_INTRA_PRED_MODE_DC,
> > + V4L2_VP9_INTRA_PRED_MODE_V,
> > + V4L2_VP9_INTRA_PRED_MODE_H,
> > + V4L2_VP9_INTRA_PRED_MODE_D45,
> > + V4L2_VP9_INTRA_PRED_MODE_D135,
> > + V4L2_VP9_INTRA_PRED_MODE_D117,
> > + V4L2_VP9_INTRA_PRED_MODE_D153,
> > + V4L2_VP9_INTRA_PRED_MODE_D207,
> > + V4L2_VP9_INTRA_PRED_MODE_D63,
> > + V4L2_VP9_INTRA_PRED_MODE_TM,
> > +};
> > +
> > +/**
> > + * struct v4l2_vp9_probabilities - VP9 Probabilities
> > + *
> > + * @tx8: TX 8x8 probabilities
> > + * @tx16: TX 16x16 probabilities
> > + * @tx32: TX 32x32 probabilities
> > + * @coef: coefficient probabilities
> > + * @skip: skip probabilities
> > + * @inter_mode: inter mode probabilities
> > + * @interp_filter: interpolation filter probabilities
> > + * @is_inter: is inter-block probabilities
> > + * @comp_mode: compound prediction mode probabilities
> > + * @single_ref: single ref probabilities
> > + * @comp_ref: compound ref probabilities
> > + * @y_mode: Y prediction mode probabilities
> > + * @uv_mode: UV prediction mode probabilities
> > + * @partition: partition probabilities
> > + * @mv.joint: motion vector joint probabilities
> > + * @mv.sign: motion vector sign probabilities
> > + * @mv.class: motion vector class probabilities
> > + * @mv.class0_bit: motion vector class0 bit probabilities
> > + * @mv.bits: motion vector bits probabilities
> > + * @mv.class0_fr: motion vector class0 fractional bit probabilities
> > + * @mv.fr: motion vector fractional bit probabilities
> > + * @mv.class0_hp: motion vector class0 high precision fractional bit
> > + * probabilities
> > + * @mv.hp: motion vector high precision fractional bit probabilities
> > + * @mv: motion vector probabilities
> > + *
> > + * Structure containing most VP9 probabilities. See the VP9 specification
> > + * for more details.
> > + */
> > +struct v4l2_vp9_probabilities {
> > + __u8 tx8[2][1];
> > + __u8 tx16[2][2];
> > + __u8 tx32[2][3];
> > + __u8 coef[4][2][2][6][6][3];
> > + __u8 skip[3];
> > + __u8 inter_mode[7][3];
> > + __u8 interp_filter[4][2];
> > + __u8 is_inter[4];
> > + __u8 comp_mode[5];
> > + __u8 single_ref[5][2];
> > + __u8 comp_ref[5];
> > + __u8 y_mode[4][9];
> > + __u8 uv_mode[10][9];
> > + __u8 partition[16][3];
> > + struct {
> > + __u8 joint[3];
> > + __u8 sign[2];
> > + __u8 class[2][10];
> > + __u8 class0_bit[2];
> > + __u8 bits[2][10];
> > + __u8 class0_fr[2][2][3];
> > + __u8 fr[2][3];
> > + __u8 class0_hp[2];
> > + __u8 hp[2];
> > + } mv;
> > +};
> > +
> > +/**
> > + * enum v4l2_vp9_reset_frame_context - Valid values for
> > + * &v4l2_ctrl_vp9_frame_decode_params->reset_frame_context
> > + *
> > + * @V4L2_VP9_RESET_FRAME_CTX_NONE: don't reset any frame context
> > + * @V4L2_VP9_RESET_FRAME_CTX_NONE_ALT: don't reset any frame context. This is an
> > + * alternate value for
> > + * V4L2_VP9_RESET_FRAME_CTX_NONE but has
> > + * the same meaning
> > + * @V4L2_VP9_RESET_FRAME_CTX_SPEC: reset the frame context pointed by
> > + * &v4l2_ctrl_vp9_frame_decode_params.frame_context_idx
> > + * @V4L2_VP9_RESET_FRAME_CTX_ALL: reset all frame contexts
> > + *
> > + * See section '7.2 Uncompressed header semantics' of the VP9 specification
> > + * for more details.
> > + */
> > +enum v4l2_vp9_reset_frame_context {
> > + V4L2_VP9_RESET_FRAME_CTX_NONE,
> > + V4L2_VP9_RESET_FRAME_CTX_NONE_ALT,
> > + V4L2_VP9_RESET_FRAME_CTX_SPEC,
> > + V4L2_VP9_RESET_FRAME_CTX_ALL,
> > +};
> > +
> > +/**
> > + * enum v4l2_vp9_color_space - Valid values for
> > + * &v4l2_ctrl_vp9_frame_decode_params->color_space
> > + *
> > + * @V4L2_VP9_COLOR_SPACE_UNKNOWN: unknown color space. In this case the color
> > + * space must be signaled outside the VP9
> > + * bitstream
> > + * @V4L2_VP9_COLOR_SPACE_BT_601: Rec. ITU-R BT.601-7
> > + * @V4L2_VP9_COLOR_SPACE_BT_709: Rec. ITU-R BT.709-6
> > + * @V4L2_VP9_COLOR_SPACE_SMPTE_170: SMPTE-170
> > + * @V4L2_VP9_COLOR_SPACE_SMPTE_240: SMPTE-240
> > + * @V4L2_VP9_COLOR_SPACE_BT_2020: Rec. ITU-R BT.2020-2
> > + * @V4L2_VP9_COLOR_SPACE_RESERVED: reserved. This value should never be passed
> > + * @V4L2_VP9_COLOR_SPACE_SRGB: sRGB (IEC 61966-2-1)
> > + *
> > + * See section '7.2.2 Color config semantics' of the VP9 specification for more
> > + * details.
> > + */
> > +enum v4l2_vp9_color_space {
> > + V4L2_VP9_COLOR_SPACE_UNKNOWN,
> > + V4L2_VP9_COLOR_SPACE_BT_601,
> > + V4L2_VP9_COLOR_SPACE_BT_709,
> > + V4L2_VP9_COLOR_SPACE_SMPTE_170,
> > + V4L2_VP9_COLOR_SPACE_SMPTE_240,
> > + V4L2_VP9_COLOR_SPACE_BT_2020,
> > + V4L2_VP9_COLOR_SPACE_RESERVED,
> > + V4L2_VP9_COLOR_SPACE_SRGB,
> > +};
> > +
> > +/**
> > + * enum v4l2_vp9_interpolation_filter - VP9 interpolation filter types
> > + *
> > + * @V4L2_VP9_INTERP_FILTER_8TAP: height tap filter
> > + * @V4L2_VP9_INTERP_FILTER_8TAP_SMOOTH: height tap smooth filter
> > + * @V4L2_VP9_INTERP_FILTER_8TAP_SHARP: height tap sharp filter
> > + * @V4L2_VP9_INTERP_FILTER_BILINEAR: bilinear filter
> > + * @V4L2_VP9_INTERP_FILTER_SWITCHABLE: filter selection is signaled at the
> > + * block level
> > + *
> > + * See section '7.2.7 Interpolation filter semantics' of the VP9 specification
> > + * for more details.
> > + */
> > +enum v4l2_vp9_interpolation_filter {
> > + V4L2_VP9_INTERP_FILTER_8TAP,
> > + V4L2_VP9_INTERP_FILTER_8TAP_SMOOTH,
> > + V4L2_VP9_INTERP_FILTER_8TAP_SHARP,
> > + V4L2_VP9_INTERP_FILTER_BILINEAR,
> > + V4L2_VP9_INTERP_FILTER_SWITCHABLE,
> > +};
> > +
> > +/**
> > + * enum v4l2_vp9_reference_mode - VP9 reference modes
> > + *
> > + * @V4L2_VP9_REF_MODE_SINGLE: indicates that all the inter blocks use only a
> > + * single reference frame to generate motion
> > + * compensated prediction
> > + * @V4L2_VP9_REF_MODE_COMPOUND: requires all the inter blocks to use compound
> > + * mode. Single reference frame prediction is not
> > + * allowed
> > + * @V4L2_VP9_REF_MODE_SELECT: allows each individual inter block to select
> > + * between single and compound prediction modes
> > + *
> > + * See section '7.3.6 Frame reference mode semantics' of the VP9 specification
> > + * for more details.
> > + */
> > +enum v4l2_vp9_reference_mode {
> > + V4L2_VP9_REF_MODE_SINGLE,
> > + V4L2_VP9_REF_MODE_COMPOUND,
> > + V4L2_VP9_REF_MODE_SELECT,
> > +};
> > +
> > +/**
> > + * enum v4l2_vp9_tx_mode - VP9 TX modes
> > + *
> > + * @V4L2_VP9_TX_MODE_ONLY_4X4: transform size is 4x4
> > + * @V4L2_VP9_TX_MODE_ALLOW_8X8: transform size can be up to 8x8
> > + * @V4L2_VP9_TX_MODE_ALLOW_16X16: transform size can be up to 16x16
> > + * @V4L2_VP9_TX_MODE_ALLOW_32X32: transform size can be up to 32x32
> > + * @V4L2_VP9_TX_MODE_SELECT: bitstream contains transform size for each block
> > + *
> > + * See section '7.3.1 Tx mode semantics' of the VP9 specification for more
> > + * details.
> > + */
> > +enum v4l2_vp9_tx_mode {
> > + V4L2_VP9_TX_MODE_ONLY_4X4,
> > + V4L2_VP9_TX_MODE_ALLOW_8X8,
> > + V4L2_VP9_TX_MODE_ALLOW_16X16,
> > + V4L2_VP9_TX_MODE_ALLOW_32X32,
> > + V4L2_VP9_TX_MODE_SELECT,
> > +};
> > +
> > +/**
> > + * enum v4l2_vp9_ref_id - VP9 Reference frame IDs
> > + *
> > + * @V4L2_REF_ID_LAST: last reference frame
> > + * @V4L2_REF_ID_GOLDEN: golden reference frame
> > + * @V4L2_REF_ID_ALTREF: alternative reference frame
> > + * @V4L2_REF_ID_CNT: number of reference frames
> > + *
> > + * See section '7.4.12 Ref frames semantics' of the VP9 specification for more
> > + * details.
> > + */
> > +enum v4l2_vp9_ref_id {
> > + V4L2_REF_ID_LAST,
> > + V4L2_REF_ID_GOLDEN,
> > + V4L2_REF_ID_ALTREF,
> > + V4L2_REF_ID_CNT,
> > +};
> > +
> > +/**
> > + * enum v4l2_vp9_frame_flags - VP9 frame flags
> > + * @V4L2_VP9_FRAME_FLAG_KEY_FRAME: the frame is a key frame
> > + * @V4L2_VP9_FRAME_FLAG_SHOW_FRAME: the frame should be displayed
> > + * @V4L2_VP9_FRAME_FLAG_ERROR_RESILIENT: the decoding should be error resilient
> > + * @V4L2_VP9_FRAME_FLAG_INTRA_ONLY: the frame does not reference other frames
> > + * @V4L2_VP9_FRAME_FLAG_ALLOW_HIGH_PREC_MV: the frame might can high precision
> > + * motion vectors
> > + * @V4L2_VP9_FRAME_FLAG_REFRESH_FRAME_CTX: frame context should be updated
> > + * after decoding
> > + * @V4L2_VP9_FRAME_FLAG_PARALLEL_DEC_MODE: parallel decoding is used
> > + * @V4L2_VP9_FRAME_FLAG_X_SUBSAMPLING: vertical subsampling is enabled
> > + * @V4L2_VP9_FRAME_FLAG_Y_SUBSAMPLING: horizontal subsampling is enabled
> > + * @V4L2_VP9_FRAME_FLAG_COLOR_RANGE_FULL_SWING: full UV range is used
> > + *
> > + * Check the VP9 specification for more details.
> > + */
> > +enum v4l2_vp9_frame_flags {
> > + V4L2_VP9_FRAME_FLAG_KEY_FRAME = 1 << 0,
> > + V4L2_VP9_FRAME_FLAG_SHOW_FRAME = 1 << 1,
> > + V4L2_VP9_FRAME_FLAG_ERROR_RESILIENT = 1 << 2,
> > + V4L2_VP9_FRAME_FLAG_INTRA_ONLY = 1 << 3,
> > + V4L2_VP9_FRAME_FLAG_ALLOW_HIGH_PREC_MV = 1 << 4,
> > + V4L2_VP9_FRAME_FLAG_REFRESH_FRAME_CTX = 1 << 5,
> > + V4L2_VP9_FRAME_FLAG_PARALLEL_DEC_MODE = 1 << 6,
> > + V4L2_VP9_FRAME_FLAG_X_SUBSAMPLING = 1 << 7,
> > + V4L2_VP9_FRAME_FLAG_Y_SUBSAMPLING = 1 << 8,
> > + V4L2_VP9_FRAME_FLAG_COLOR_RANGE_FULL_SWING = 1 << 9,
> > +};
> > +
> > +#define V4L2_VP9_PROFILE_MAX 3
> > +
> > +/**
> > + * struct v4l2_ctrl_vp9_frame_decode_params - VP9 frame decoding control
> > + *
> > + * @flags: combination of V4L2_VP9_FRAME_FLAG_* flags
> > + * @compressed_header_size: compressed header size in bytes
> > + * @uncompressed_header_size: uncompressed header size in bytes
> > + * @profile: VP9 profile. Can be 0, 1, 2 or 3
> > + * @reset_frame_context: specifies whether the frame context should be reset
> > + * to default values. See &v4l2_vp9_reset_frame_context
> > + * for more details
> > + * @frame_context_idx: frame context that should be used/updated
> > + * @bit_depth: bits per components. Can be 8, 10 or 12. Note that not all
> > + * profiles support 10 and/or 12 bits depths
> > + * @color_space: specifies the color space of the stream. See
> > + * &v4l2_vp9_color_space for more details
> > + * @interpolation_filter: specifies the filter selection used for performing
> > + * inter prediction. See &v4l2_vp9_interpolation_filter
> > + * for more details
> > + * @tile_cols_log2: specifies the base 2 logarithm of the width of each tile
> > + * (where the width is measured in units of 8x8 blocks).
> > + * Shall be less than or equal to 6
> > + * @tile_rows_log2: specifies the base 2 logarithm of the height of each tile
> > + * (where the height is measured in units of 8x8 blocks)
> > + * @tx_mode: specifies the TX mode. See &v4l2_vp9_tx_mode for more details
> > + * @reference_mode: specifies the type of inter prediction to be used. See
> > + * &v4l2_vp9_reference_mode for more details
> > + * @padding: needed to make this struct 64 bit aligned. Shall be filled with
> > + * zeros
> > + * @frame_width_minus_1: add 1 to it and you'll get the frame width expressed
> > + * in pixels
> > + * @frame_height_minus_1: add 1 to it and you'll get the frame height expressed
> > + * in pixels
> > + * @frame_width_minus_1: add 1 to it and you'll get the expected render width
> > + * expressed in pixels. This is not used during the
> > + * decoding process but might be used by HW scalers to
> > + * prepare a frame that's ready for scanout
> > + * @frame_height_minus_1: add 1 to it and you'll get the expected render height
> > + * expressed in pixels. This is not used during the
> > + * decoding process but might be used by HW scalers to
> > + * prepare a frame that's ready for scanout
> > + * @refs: array of reference frames. See &v4l2_vp9_ref_id for more details
> > + * @lf: loop filter parameters. See &v4l2_vp9_loop_filter for more details
> > + * @quant: quantization parameters. See &v4l2_vp9_quantization for more details
> > + * @seg: segmentation parameters. See &v4l2_vp9_segmentation for more details
> > + * @probs: probabilities. See &v4l2_vp9_probabilities for more details
> > + */
> > +struct v4l2_ctrl_vp9_frame_decode_params {
> > + __u32 flags;
> > + __u16 compressed_header_size;
> > + __u16 uncompressed_header_size;
> > + __u8 profile;
> > + __u8 reset_frame_context;
> > + __u8 frame_context_idx;
> > + __u8 bit_depth;
> > + __u8 color_space;
> > + __u8 interpolation_filter;
> > + __u8 tile_cols_log2;
> > + __u8 tile_rows_log2;
> > + __u8 tx_mode;
> > + __u8 reference_mode;
> > + __u8 padding[6];
> > + __u16 frame_width_minus_1;
> > + __u16 frame_height_minus_1;
> > + __u16 render_width_minus_1;
> > + __u16 render_height_minus_1;
> > + __u64 refs[V4L2_REF_ID_CNT];
> > + struct v4l2_vp9_loop_filter lf;
> > + struct v4l2_vp9_quantization quant;
> > + struct v4l2_vp9_segmentation seg;
> > + struct v4l2_vp9_probabilities probs;
> > +};
> > +
> > +#define V4L2_VP9_NUM_FRAME_CTX 4
> > +
> > +/**
> > + * struct v4l2_ctrl_vp9_frame_ctx - VP9 frame context control
> > + *
> > + * @probs: VP9 probabilities
> > + *
> > + * This control is accessed in both direction. The user should initialize the
> > + * 4 contexts with default values just after starting the stream. Then before
> > + * decoding a frame it should query the current frame context (the one passed
> > + * through &v4l2_ctrl_vp9_frame_decode_params.frame_context_idx) to initialize
> > + * &v4l2_ctrl_vp9_frame_decode_params.probs. The probs are then adjusted based
> > + * on the bitstream info and passed to the kernel. The codec should update
> > + * the frame context after the frame has been decoded, so that next time
> > + * userspace query this context it contains the updated probabilities.
> > + */
> > +struct v4l2_ctrl_vp9_frame_ctx {
> > + struct v4l2_vp9_probabilities probs;
> > +};
> > +
> > +#endif /* _VP9_CTRLS_H_ */
> >
>
> I got several smatch warnings:
>
> smatch: ERRORS
> drivers/media/v4l2-core/v4l2-ctrls.c:1880 validate_vp9_frame_decode_params() warn: was && intended here instead of ||?
>
> (Commented on this ^^^ one above)
>
> drivers/staging/media/rkvdec/rkvdec-vp9.c:426 init_intra_only_probs() error: buffer overflow 'ptr' 9 <= 69
> drivers/staging/media/rkvdec/rkvdec-vp9.c:1478 rkvdec_vp9_done() error: potentially dereferencing uninitialized 'ctrl'.
> drivers/staging/media/rkvdec/rkvdec-vp9.c:1483 rkvdec_vp9_done() error: uninitialized symbol 'dec_dst_buf'.
> drivers/staging/media/rkvdec/rkvdec-vp9.c:941:6: warning: variable 'ret' set but not used [-Wunused-but-set-variable]
> drivers/staging/media/rkvdec/rkvdec-vp9.c:1466:40: warning: variable 'fctx' set but not used [-Wunused-but-set-variable]
>
Oh, I'll run smatch and fix them all.
Thanks,
Ezequiel