[PATCH v2 2/5] ASoC: lochnagar: Move binding over to dtschema
From: Charles Keepax
Date: Mon May 04 2020 - 11:48:22 EST
Signed-off-by: Charles Keepax <ckeepax@xxxxxxxxxxxxxxxxxxxxx>
---
Changes since v1:
- Moved sub-node into MFD file leaving just the properties in here
- Removed contains on the compatible
- Removed some pointless descriptions
Thanks,
Charles
.../devicetree/bindings/sound/cirrus,lochnagar.txt | 39 ----------------
.../bindings/sound/cirrus,lochnagar.yaml | 52 ++++++++++++++++++++++
2 files changed, 52 insertions(+), 39 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/sound/cirrus,lochnagar.txt
create mode 100644 Documentation/devicetree/bindings/sound/cirrus,lochnagar.yaml
diff --git a/Documentation/devicetree/bindings/sound/cirrus,lochnagar.txt b/Documentation/devicetree/bindings/sound/cirrus,lochnagar.txt
deleted file mode 100644
index 41ae2699f07a9..0000000000000
--- a/Documentation/devicetree/bindings/sound/cirrus,lochnagar.txt
+++ /dev/null
@@ -1,39 +0,0 @@
-Cirrus Logic Lochnagar Audio Development Board
-
-Lochnagar is an evaluation and development board for Cirrus Logic
-Smart CODEC and Amp devices. It allows the connection of most Cirrus
-Logic devices on mini-cards, as well as allowing connection of
-various application processor systems to provide a full evaluation
-platform. Audio system topology, clocking and power can all be
-controlled through the Lochnagar, allowing the device under test
-to be used in a variety of possible use cases.
-
-This binding document describes the binding for the audio portion
-of the driver.
-
-This binding must be part of the Lochnagar MFD binding:
- [4] ../mfd/cirrus,lochnagar.txt
-
-Required properties:
-
- - compatible : One of the following strings:
- "cirrus,lochnagar2-soundcard"
-
- - #sound-dai-cells : Must be set to 1.
-
- - clocks : Contains an entry for each entry in clock-names.
- - clock-names : Must include the following clocks:
- "mclk" Master clock source for the sound card, should normally
- be set to LOCHNAGAR_SOUNDCARD_MCLK provided by the Lochnagar
- clock driver.
-
-Example:
-
-lochnagar-sc {
- compatible = "cirrus,lochnagar2-soundcard";
-
- #sound-dai-cells = <1>;
-
- clocks = <&lochnagar_clk LOCHNAGAR_SOUNDCARD_MCLK>;
- clock-names = "mclk";
-};
diff --git a/Documentation/devicetree/bindings/sound/cirrus,lochnagar.yaml b/Documentation/devicetree/bindings/sound/cirrus,lochnagar.yaml
new file mode 100644
index 0000000000000..cea612d3d4a7d
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/cirrus,lochnagar.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/cirrus,lochnagar.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cirrus Logic Lochnagar Audio Development Board
+
+maintainers:
+ - patches@xxxxxxxxxxxxxxxxxxxxx
+
+description: |
+ Lochnagar is an evaluation and development board for Cirrus Logic
+ Smart CODEC and Amp devices. It allows the connection of most Cirrus
+ Logic devices on mini-cards, as well as allowing connection of various
+ application processor systems to provide a full evaluation platform.
+ Audio system topology, clocking and power can all be controlled through
+ the Lochnagar, allowing the device under test to be used in a variety of
+ possible use cases.
+
+ This binding document describes the binding for the audio portion of the
+ driver.
+
+ This binding must be part of the Lochnagar MFD binding:
+ [1] ../mfd/cirrus,lochnagar.yaml
+
+properties:
+ compatible:
+ enum:
+ - cirrus,lochnagar2-soundcard
+
+ '#sound-dai-cells':
+ description:
+ The first cell indicating the audio interface.
+ const: 1
+
+ clocks:
+ description:
+ Master clock source for the sound card, should normally be set to
+ LOCHNAGAR_SOUNDCARD_MCLK provided by the Lochnagar clock driver.
+ maxItems: 1
+
+ clock-names:
+ const: mclk
+
+required:
+ - compatible
+ - '#sound-dai-cells'
+ - clocks
+ - clock-names
+
+additionalProperties: false
--
2.11.0