Re: [PATCH v7 6/7] OPP: Update the bandwidth on OPP frequency changes

[Saravana Kannan]

On Sun, May 3, 2020 at 10:00 PM Viresh Kumar <viresh.kumar@xxxxxxxxxx> wrote:
>
> On 30-04-20, 09:32, Saravana Kannan wrote:
> > You are missing the point. This is not about aggregation. This is
> > about OPP voting for bandwidth on a path when the vote can/should be
> > 0.
> >
> > I'll give another example. Say one of the interconnect paths needs to
> > be voted only when a particular use case is running. Say, the GPU
> > needs to vote for bandwidth to L3 only when it's running in cache
> > coherent mode. But it always needs to vote for bandwidth to DDR. With
> > the way it's written now, OPP is going to force vote a non-zero
> > bandwidth to L3 even when it can be zero. Wasting power for no good
> > reason.
> >
> > Just let the drivers/device get the bandwidth values from OPP without
> > forcing them to vote for the bandwidth when they don't need to. Just
> > because they decide to use OPP to set their clock doesn't mean they
> > should lose to ability to control their bandwidth in a more
> > intelligent fashion.
>
> They shouldn't use opp_set_rate() in such a scenario. Why should they?
>
> opp_set_rate() was introduced to take care of only the simple cases
> and the complex ones are left for the drivers to handle. For example,
> they take care of programming multiple regulators (in case of TI), as
> OPP core can't know the order in which regulators need to be
> programmed. But for the simple cases, opp core can program everything
> the way it is presented in DT.

Fair enough. But don't "voltage corner" based devices NEED to use OPP
framework to set their frequencies?

Because, if voltage corners are only handled through OPP framework,
then any device that uses voltage corners doesn't get to pick and
choose when to vote for what path. Also, maybe a one liner helper
function to enable BW voting using OPP framework by default might be
another option. Something like:
dev_pm_opp_enable_bw_voting(struct device *dev)?

If devices with voltage corners can still do their own
frequency/voltage corner control without having to use OPP framework,
then I agree with your point above.

-Saravana