Re: [PATCH v2 2/2] usb: xhci: Load Raspberry Pi 4 VL805's firmware

[Matthias Brugger]

On 30/04/2020 15:04, Nicolas Saenz Julienne wrote:
> When needed, RPi4's co-processor (called VideoCore) has to be instructed
> to load VL805's firmware (the chip providing xHCI support). VideoCore's
> firmware expects the board's PCIe bus to be already configured in order
> for it to load the xHCI chip firmware. So we have to make sure this
> happens in between the PCIe configuration and xHCI startup.
> 
> Introduce a callback in xhci_pci_probe() to run this platform specific
> routine.
> 
> Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@xxxxxxx>
> 
> ---
> 
> Changes since v1:
>  - Create callback
> 
>  board/raspberrypi/rpi/rpi.c | 12 ++++++++++++
>  drivers/usb/host/xhci-pci.c |  6 ++++++
>  include/usb/xhci.h          |  3 +++
>  3 files changed, 21 insertions(+)
> 
> diff --git a/board/raspberrypi/rpi/rpi.c b/board/raspberrypi/rpi/rpi.c
> index e367ba3092..8aa78d1f48 100644
> --- a/board/raspberrypi/rpi/rpi.c
> +++ b/board/raspberrypi/rpi/rpi.c
> @@ -14,6 +14,7 @@
>  #include <lcd.h>
>  #include <memalign.h>
>  #include <mmc.h>
> +#include <usb/xhci.h>
>  #include <asm/gpio.h>
>  #include <asm/arch/mbox.h>
>  #include <asm/arch/msg.h>
> @@ -494,3 +495,14 @@ int ft_board_setup(void *blob, bd_t *bd)
>  
>  	return 0;
>  }
> +
> +#ifdef CONFIG_BCM2711

This won't work with rpi_arm64_defconfig.
Can't we just evaluate at runtime if we need to do anything in xhci_pci_fixup.

I wonder if the newer RPi4 have also a newer revision ID (see get_board_rev). If
so we could add another bool to struct rpi_model which will indicate us if we
need to notify VideoCore about vl805's firmware.

Regards,
Matthias

> +void xhci_pci_fixup(struct udevice *dev)
> +{
> +	int ret;
> +
> +	ret = bcm2711_notify_vl805_reset();
> +	if (ret)
> +		printf("RPI: Failed to notify VideoCore about vl805's firmware\n");
> +}
> +#endif
> diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
> index c1f60da541..1285dde1ef 100644
> --- a/drivers/usb/host/xhci-pci.c
> +++ b/drivers/usb/host/xhci-pci.c
> @@ -11,6 +11,10 @@
>  #include <usb.h>
>  #include <usb/xhci.h>
>  
> +__weak void xhci_pci_fixup(struct udevice *dev)
> +{
> +}
> +
>  static void xhci_pci_init(struct udevice *dev, struct xhci_hccr **ret_hccr,
>  			  struct xhci_hcor **ret_hcor)
>  {
> @@ -40,6 +44,8 @@ static int xhci_pci_probe(struct udevice *dev)
>  	struct xhci_hccr *hccr;
>  	struct xhci_hcor *hcor;
>  
> +	xhci_pci_fixup(dev);
> +
>  	xhci_pci_init(dev, &hccr, &hcor);
>  
>  	return xhci_register(dev, hccr, hcor);
> diff --git a/include/usb/xhci.h b/include/usb/xhci.h
> index c16106a2fc..57feed7603 100644
> --- a/include/usb/xhci.h
> +++ b/include/usb/xhci.h
> @@ -16,6 +16,7 @@
>  #ifndef HOST_XHCI_H_
>  #define HOST_XHCI_H_
>  
> +#include <usb.h>
>  #include <asm/types.h>
>  #include <asm/cache.h>
>  #include <asm/io.h>
> @@ -1281,4 +1282,6 @@ extern struct dm_usb_ops xhci_usb_ops;
>  
>  struct xhci_ctrl *xhci_get_ctrl(struct usb_device *udev);
>  
> +extern void xhci_pci_fixup(struct udevice *dev);
> +
>  #endif /* HOST_XHCI_H_ */
>