Re: [PATCH v2 2/2] usb: xhci: Load Raspberry Pi 4 VL805's firmware

[Nicolas Saenz Julienne]

On Tue, 2020-05-05 at 15:39 +0200, Matthias Brugger wrote:
> 
> On 05/05/2020 14:53, Nicolas Saenz Julienne wrote:
> > Hi Matthias,
> > 
> > On Tue, 2020-05-05 at 14:15 +0200, Matthias Brugger wrote:
> > > On 30/04/2020 15:04, Nicolas Saenz Julienne wrote:
> > > > When needed, RPi4's co-processor (called VideoCore) has to be instructed
> > > > to load VL805's firmware (the chip providing xHCI support). VideoCore's
> > > > firmware expects the board's PCIe bus to be already configured in order
> > > > for it to load the xHCI chip firmware. So we have to make sure this
> > > > happens in between the PCIe configuration and xHCI startup.
> > > > 
> > > > Introduce a callback in xhci_pci_probe() to run this platform specific
> > > > routine.
> > > > 
> > > > Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@xxxxxxx>
> > > > 
> > > > ---
> > > > 
> > > > Changes since v1:
> > > >  - Create callback
> > > > 
> > > >  board/raspberrypi/rpi/rpi.c | 12 ++++++++++++
> > > >  drivers/usb/host/xhci-pci.c |  6 ++++++
> > > >  include/usb/xhci.h          |  3 +++
> > > >  3 files changed, 21 insertions(+)
> > > > 
> > > > diff --git a/board/raspberrypi/rpi/rpi.c b/board/raspberrypi/rpi/rpi.c
> > > > index e367ba3092..8aa78d1f48 100644
> > > > --- a/board/raspberrypi/rpi/rpi.c
> > > > +++ b/board/raspberrypi/rpi/rpi.c
> > > > @@ -14,6 +14,7 @@
> > > >  #include <lcd.h>
> > > >  #include <memalign.h>
> > > >  #include <mmc.h>
> > > > +#include <usb/xhci.h>
> > > >  #include <asm/gpio.h>
> > > >  #include <asm/arch/mbox.h>
> > > >  #include <asm/arch/msg.h>
> > > > @@ -494,3 +495,14 @@ int ft_board_setup(void *blob, bd_t *bd)
> > > >  
> > > >  	return 0;
> > > >  }
> > > > +
> > > > +#ifdef CONFIG_BCM2711
> > > 
> > > This won't work with rpi_arm64_defconfig.
> > > Can't we just evaluate at runtime if we need to do anything in
> > > xhci_pci_fixup.
> > 
> > I can't see why, who is going to call xhci_pci_probe() in RPi3?
> > 
> 
> If you do make rpi_arm64_defconfig and inspect the .config, you will see that
> CONFIG_BCM2711 is not defined, so this code won't be called on RPi4.

Oh! Understood.

Well, given that only xhci_pci_probe() is called if we're running on RPi4, I
think I can disregard those defines altogether. I'll double-check that.

Regards,
Nicolas

> Regards,
> Matthias
> 
> > Regards,
> > Nicolas
> > 
> > > I wonder if the newer RPi4 have also a newer revision ID (see
> > > get_board_rev).
> > > If
> > > so we could add another bool to struct rpi_model which will indicate us if
> > > we
> > > need to notify VideoCore about vl805's firmware.
> > > 
> > > > +void xhci_pci_fixup(struct udevice *dev)
> > > > +{
> > > > +	int ret;
> > > > +
> > > > +	ret = bcm2711_notify_vl805_reset();
> > > > +	if (ret)
> > > > +		printf("RPI: Failed to notify VideoCore about vl805's
> > > > firmware\n");
> > > > +}
> > > > +#endif
> > > > diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
> > > > index c1f60da541..1285dde1ef 100644
> > > > --- a/drivers/usb/host/xhci-pci.c
> > > > +++ b/drivers/usb/host/xhci-pci.c
> > > > @@ -11,6 +11,10 @@
> > > >  #include <usb.h>
> > > >  #include <usb/xhci.h>
> > > >  
> > > > +__weak void xhci_pci_fixup(struct udevice *dev)
> > > > +{
> > > > +}
> > > > +
> > > >  static void xhci_pci_init(struct udevice *dev, struct xhci_hccr
> > > > **ret_hccr,
> > > >  			  struct xhci_hcor **ret_hcor)
> > > >  {
> > > > @@ -40,6 +44,8 @@ static int xhci_pci_probe(struct udevice *dev)
> > > >  	struct xhci_hccr *hccr;
> > > >  	struct xhci_hcor *hcor;
> > > >  
> > > > +	xhci_pci_fixup(dev);
> > > > +
> > > >  	xhci_pci_init(dev, &hccr, &hcor);
> > > >  
> > > >  	return xhci_register(dev, hccr, hcor);
> > > > diff --git a/include/usb/xhci.h b/include/usb/xhci.h
> > > > index c16106a2fc..57feed7603 100644
> > > > --- a/include/usb/xhci.h
> > > > +++ b/include/usb/xhci.h
> > > > @@ -16,6 +16,7 @@
> > > >  #ifndef HOST_XHCI_H_
> > > >  #define HOST_XHCI_H_
> > > >  
> > > > +#include <usb.h>
> > > >  #include <asm/types.h>
> > > >  #include <asm/cache.h>
> > > >  #include <asm/io.h>
> > > > @@ -1281,4 +1282,6 @@ extern struct dm_usb_ops xhci_usb_ops;
> > > >  
> > > >  struct xhci_ctrl *xhci_get_ctrl(struct usb_device *udev);
> > > >  
> > > > +extern void xhci_pci_fixup(struct udevice *dev);
> > > > +
> > > >  #endif /* HOST_XHCI_H_ */
> > > >

Attachment: signature.asc
Description: This is a digitally signed message part