Re: [PATCH v4 4/6] dt-bindings: drm/bridge: ti-sn65dsi86: Convert to yaml
From: Doug Anderson
Date: Tue May 05 2020 - 18:26:26 EST
Laurent,
On Tue, May 5, 2020 at 2:35 PM Laurent Pinchart
<laurent.pinchart@xxxxxxxxxxxxxxxx> wrote:
>
> Hi Doug,
>
> Thank you for the patch.
>
> On Thu, Apr 30, 2020 at 12:46:15PM -0700, Douglas Anderson wrote:
> > This moves the bindings over, based a lot on toshiba,tc358768.yaml.
> > Unless there's someone known to be better, I've set the maintainer in
> > the yaml as the first person to submit bindings.
> >
> > Signed-off-by: Douglas Anderson <dianders@xxxxxxxxxxxx>
> > Reviewed-by: Stephen Boyd <swboyd@xxxxxxxxxxxx>
> > ---
> >
> > Changes in v4: None
> > Changes in v3: None
> > Changes in v2:
> > - specification => specifier.
> > - power up => power.
> > - Added back missing suspend-gpios.
> > - data-lanes and lane-polarities are are the right place now.
> > - endpoints don't need to be patternProperties.
> > - Specified more details for data-lanes and lane-polarities.
> > - Added old example back in, fixing bugs in it.
> > - Example i2c bus is just called "i2c", not "i2c1" now.
> >
> > .../bindings/display/bridge/ti,sn65dsi86.txt | 87 ------
> > .../bindings/display/bridge/ti,sn65dsi86.yaml | 279 ++++++++++++++++++
> > 2 files changed, 279 insertions(+), 87 deletions(-)
> > delete mode 100644 Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.txt
> > create mode 100644 Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.yaml
> >
> > diff --git a/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.txt b/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.txt
> > deleted file mode 100644
> > index 8ec4a7f2623a..000000000000
> > --- a/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.txt
> > +++ /dev/null
> > @@ -1,87 +0,0 @@
> > -SN65DSI86 DSI to eDP bridge chip
> > ---------------------------------
> > -
> > -This is the binding for Texas Instruments SN65DSI86 bridge.
> > -http://www.ti.com/general/docs/lit/getliterature.tsp?genericPartNumber=sn65dsi86&fileType=pdf
> > -
> > -Required properties:
> > -- compatible: Must be "ti,sn65dsi86"
> > -- reg: i2c address of the chip, 0x2d as per datasheet
> > -- enable-gpios: gpio specification for bridge_en pin (active high)
> > -
> > -- vccio-supply: A 1.8V supply that powers up the digital IOs.
> > -- vpll-supply: A 1.8V supply that powers up the displayport PLL.
> > -- vcca-supply: A 1.2V supply that powers up the analog circuits.
> > -- vcc-supply: A 1.2V supply that powers up the digital core.
> > -
> > -Optional properties:
> > -- interrupts-extended: Specifier for the SN65DSI86 interrupt line.
> > -
> > -- gpio-controller: Marks the device has a GPIO controller.
> > -- #gpio-cells : Should be two. The first cell is the pin number and
> > - the second cell is used to specify flags.
> > - See ../../gpio/gpio.txt for more information.
> > -- #pwm-cells : Should be one. See ../../pwm/pwm.yaml for description of
> > - the cell formats.
> > -
> > -- clock-names: should be "refclk"
> > -- clocks: Specification for input reference clock. The reference
> > - clock rate must be 12 MHz, 19.2 MHz, 26 MHz, 27 MHz or 38.4 MHz.
> > -
> > -- data-lanes: See ../../media/video-interface.txt
> > -- lane-polarities: See ../../media/video-interface.txt
> > -
> > -- suspend-gpios: specification for GPIO1 pin on bridge (active low)
> > -
> > -Required nodes:
> > -This device has two video ports. Their connections are modelled using the
> > -OF graph bindings specified in Documentation/devicetree/bindings/graph.txt.
> > -
> > -- Video port 0 for DSI input
> > -- Video port 1 for eDP output
> > -
> > -Example
> > --------
> > -
> > -edp-bridge@2d {
> > - compatible = "ti,sn65dsi86";
> > - #address-cells = <1>;
> > - #size-cells = <0>;
> > - reg = <0x2d>;
> > -
> > - enable-gpios = <&msmgpio 33 GPIO_ACTIVE_HIGH>;
> > - suspend-gpios = <&msmgpio 34 GPIO_ACTIVE_LOW>;
> > -
> > - interrupts-extended = <&gpio3 4 IRQ_TYPE_EDGE_FALLING>;
> > -
> > - vccio-supply = <&pm8916_l17>;
> > - vcca-supply = <&pm8916_l6>;
> > - vpll-supply = <&pm8916_l17>;
> > - vcc-supply = <&pm8916_l6>;
> > -
> > - clock-names = "refclk";
> > - clocks = <&input_refclk>;
> > -
> > - ports {
> > - #address-cells = <1>;
> > - #size-cells = <0>;
> > -
> > - port@0 {
> > - reg = <0>;
> > -
> > - edp_bridge_in: endpoint {
> > - remote-endpoint = <&dsi_out>;
> > - };
> > - };
> > -
> > - port@1 {
> > - reg = <1>;
> > -
> > - edp_bridge_out: endpoint {
> > - data-lanes = <2 1 3 0>;
> > - lane-polarities = <0 1 0 1>;
> > - remote-endpoint = <&edp_panel_in>;
> > - };
> > - };
> > - };
> > -}
> > diff --git a/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.yaml b/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.yaml
> > new file mode 100644
> > index 000000000000..6d7d40ad45ac
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.yaml
> > @@ -0,0 +1,279 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/display/bridge/ti,sn65dsi86.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: SN65DSI86 DSI to eDP bridge chip
> > +
> > +maintainers:
> > + - Sandeep Panda <spanda@xxxxxxxxxxxxxx>
> > +
> > +description: |
> > + The Texas Instruments SN65DSI86 bridge takes MIPI DSI in and outputs eDP.
> > + http://www.ti.com/general/docs/lit/getliterature.tsp?genericPartNumber=sn65dsi86&fileType=pdf
> > +
> > +properties:
> > + compatible:
> > + const: ti,sn65dsi86
> > +
> > + reg:
> > + const: 0x2d
> > +
> > + enable-gpios:
> > + maxItems: 1
> > + description: GPIO specifier for bridge_en pin (active high).
> > +
> > + suspend-gpios:
> > + maxItems: 1
> > + description: GPIO specifier for GPIO1 pin on bridge (active low).
> > +
> > + vccio-supply:
> > + description: A 1.8V supply that powers the digital IOs.
> > +
> > + vpll-supply:
> > + description: A 1.8V supply that powers the DisplayPort PLL.
> > +
> > + vcca-supply:
> > + description: A 1.2V supply that powers the analog circuits.
> > +
> > + vcc-supply:
> > + description: A 1.2V supply that powers the digital core.
> > +
> > + interrupts:
> > + maxItems: 1
> > +
> > + clocks:
> > + maxItems: 1
> > + description:
> > + Clock specifier for input reference clock. The reference clock rate must
> > + be 12 MHz, 19.2 MHz, 26 MHz, 27 MHz or 38.4 MHz.
> > +
> > + clock-names:
> > + const: refclk
> > +
> > + gpio-controller: true
> > + '#gpio-cells':
> > + const: 2
> > + description:
> > + First cell is pin number, second cell is flags. GPIO pin numbers are
> > + 1-based to match the datasheet. See ../../gpio/gpio.txt for more
> > + information.
> > +
> > + '#pwm-cells':
> > + const: 1
> > + description: See ../../pwm/pwm.yaml for description of the cell formats.
> > +
> > + ports:
> > + type: object
>
> Maybe
>
> additionalProperties: false
>
> here ?
Ah, this is to keep people from adding "additionalProperties" under
the ports node. I will hold off on sending v5 for now. If there
happens to be nothing else wrong I'm happy for this to be added by a
maintainer when landing or I can quickly spin a v5.
> > +
> > + properties:
> > + "#address-cells":
> > + const: 1
> > +
> > + "#size-cells":
> > + const: 0
> > +
> > + port@0:
> > + type: object
> > + additionalProperties: false
> > +
> > + description:
> > + Video port for MIPI DSI input
> > +
> > + properties:
> > + reg:
> > + const: 0
> > +
> > + endpoint:
> > + type: object
> > + additionalProperties: false
> > +
> > + properties:
> > + remote-endpoint: true
> > +
> > + data-lanes:
> > + minItems: 1
> > + maxItems: 4
> > + items:
> > + enum:
> > + - 0
> > + - 1
> > + - 2
> > + - 3
> > + description: See ../../media/video-interface.txt
>
> And maybe
> uniqueItems: true
>
> ? Same for port@1.
Sounds good. Again, I'll hold off on sending v5 for now and (if no
other problems) happy if this gets done when applied.
> Reviewed-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
Thanks!
-Doug