[PATCH v4 00/14] Add PCIe support to TI's J721E SoC

[Kishon Vijay Abraham I]

TI's J721E SoC uses Cadence PCIe core to implement both RC mode
and EP mode.

The high level features are:
  *) Supports Legacy, MSI and MSI-X interrupt
  *) Supports upto GEN4 speed mode
  *) Supports SR-IOV
  *) Supports multiple physical function
  *) Ability to route all transactions via SMMU

This patch series
  *) Add support in Cadence PCIe core to be used for TI's J721E SoC
  *) Add a driver for J721E PCIe wrapper

v1 of the series can be found @ [1]
v2 of the series can be found @ [2]
v3 of the series can be found @ [5]

Changes from v3:
1) Changed the order of files in MAINTAINTERS file to fix Joe's comments
2) Fixed indentation and added Reviewed-by: Rob Herring <robh@xxxxxxxxxx>
3) Cleaned up computing msix_tbl
4) Fixed RobH's comment on J721E driver

Changes from v2:
1) Converting Cadence binding to YAML schema was done as a 
   separate series [3] & [4]. [3] is merged and [4] is
   pending.
2) Included MSI-X support in this series
3) Added link down interrupt handling (only error message)
4) Rebased to latest 5.7-rc1
5) Adapted TI J721E binding to [3] & [4] 

Changes from v1:
1) Added DT schemas cdns-pcie-host.yaml, cdns-pcie-ep.yaml and
   cdns-pcie.yaml for Cadence PCIe core and included it in
   TI's PCIe DT schema.
2) Added cpu_addr_fixup() for Cadence Platform driver.
3) Fixed subject/description/renamed functions as commented by
   Andrew Murray.

[1] -> http://lore.kernel.org/r/20191209092147.22901-1-kishon@xxxxxx
[2] -> http://lore.kernel.org/r/20200106102058.19183-1-kishon@xxxxxx
[3] -> http://lore.kernel.org/r/20200305103017.16706-1-kishon@xxxxxx
[4] -> http://lore.kernel.org/r/20200417114322.31111-1-kishon@xxxxxx
[5] -> http://lore.kernel.org/r/20200417125753.13021-1-kishon@xxxxxx

Alan Douglas (1):
  PCI: cadence: Add MSI-X support to Endpoint driver

Kishon Vijay Abraham I (13):
  PCI: cadence: Fix cdns_pcie_{host|ep}_setup() error path
  linux/kernel.h: Add PTR_ALIGN_DOWN macro
  PCI: cadence: Add support to use custom read and write accessors
  PCI: cadence: Add support to start link and verify link status
  PCI: cadence: Add read/write accessors to perform only 32-bit accesses
  PCI: cadence: Allow pci_host_bridge to have custom pci_ops
  PCI: cadence: Add new *ops* for CPU addr fixup
  PCI: cadence: Fix updating Vendor ID and Subsystem Vendor ID register
  dt-bindings: PCI: Add host mode dt-bindings for TI's J721E SoC
  dt-bindings: PCI: Add EP mode dt-bindings for TI's J721E SoC
  PCI: j721e: Add TI J721E PCIe driver
  misc: pci_endpoint_test: Add J721E in pci_device_id table
  MAINTAINERS: Add Kishon Vijay Abraham I for TI J721E SoC PCIe

 .../bindings/pci/ti,j721e-pci-ep.yaml         |  89 ++++
 .../bindings/pci/ti,j721e-pci-host.yaml       | 113 ++++
 MAINTAINERS                                   |   4 +-
 drivers/misc/pci_endpoint_test.c              |   9 +
 drivers/pci/controller/cadence/Kconfig        |  23 +
 drivers/pci/controller/cadence/Makefile       |   1 +
 drivers/pci/controller/cadence/pci-j721e.c    | 492 ++++++++++++++++++
 .../pci/controller/cadence/pcie-cadence-ep.c  | 125 ++++-
 .../controller/cadence/pcie-cadence-host.c    |  59 ++-
 .../controller/cadence/pcie-cadence-plat.c    |  13 +
 drivers/pci/controller/cadence/pcie-cadence.c |  48 +-
 drivers/pci/controller/cadence/pcie-cadence.h | 158 +++++-
 include/linux/kernel.h                        |   1 +
 13 files changed, 1093 insertions(+), 42 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/pci/ti,j721e-pci-ep.yaml
 create mode 100644 Documentation/devicetree/bindings/pci/ti,j721e-pci-host.yaml
 create mode 100644 drivers/pci/controller/cadence/pci-j721e.c

-- 
2.17.1