Re: [PATCH v4 2/6] spi: spi-geni-qcom: Use OPP API to set clk/perf state

From: Rajendra Nayak
Date: Thu May 07 2020 - 13:01:22 EST



On 5/3/2020 5:34 PM, Rajendra Nayak wrote:
geni spi needs to express a perforamnce state requirement on CX
depending on the frequency of the clock rates. Use OPP table from
DT to register with OPP framework and use dev_pm_opp_set_rate() to
set the clk/perf state.

Signed-off-by: Rajendra Nayak <rnayak@xxxxxxxxxxxxxx>
Reviewed-by: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
Cc: Mark Brown <broonie@xxxxxxxxxx>
Cc: Alok Chauhan <alokc@xxxxxxxxxxxxxx>
Cc: Akash Asthana <akashast@xxxxxxxxxxxxxx>
Cc: linux-spi@xxxxxxxxxxxxxxx
---
This patch has a dependency on the 'PATCH 1/6' in this series,
due to the changes in include/linux/qcom-geni-se.h
Its ideal if this and the previous patch gets merged via the
msm tree (once reviewed and ack'ed)
Greg has already responded he is fine with it for serial.

Mark, would you be able to review/ack this patch so it can be
taken in via the msm tree? 'PATCH 1/6' is Ack'd by Greg, and its
going to land via the msm tree as well.


drivers/spi/spi-geni-qcom.c | 26 +++++++++++++++++++++++---
1 file changed, 23 insertions(+), 3 deletions(-)

diff --git a/drivers/spi/spi-geni-qcom.c b/drivers/spi/spi-geni-qcom.c
index c397242..bc2916f 100644
--- a/drivers/spi/spi-geni-qcom.c
+++ b/drivers/spi/spi-geni-qcom.c
@@ -7,6 +7,7 @@
#include <linux/log2.h>
#include <linux/module.h>
#include <linux/platform_device.h>
+#include <linux/pm_opp.h>
#include <linux/pm_runtime.h>
#include <linux/qcom-geni-se.h>
#include <linux/spi/spi.h>
@@ -95,7 +96,6 @@ static int get_spi_clk_cfg(unsigned int speed_hz,
{
unsigned long sclk_freq;
unsigned int actual_hz;
- struct geni_se *se = &mas->se;
int ret;
ret = geni_se_clk_freq_match(&mas->se,
@@ -112,9 +112,9 @@ static int get_spi_clk_cfg(unsigned int speed_hz,
dev_dbg(mas->dev, "req %u=>%u sclk %lu, idx %d, div %d\n", speed_hz,
actual_hz, sclk_freq, *clk_idx, *clk_div);
- ret = clk_set_rate(se->clk, sclk_freq);
+ ret = dev_pm_opp_set_rate(mas->dev, sclk_freq);
if (ret)
- dev_err(mas->dev, "clk_set_rate failed %d\n", ret);
+ dev_err(mas->dev, "dev_pm_opp_set_rate failed %d\n", ret);
return ret;
}
@@ -561,6 +561,17 @@ static int spi_geni_probe(struct platform_device *pdev)
mas->se.wrapper = dev_get_drvdata(dev->parent);
mas->se.base = base;
mas->se.clk = clk;
+ mas->se.opp_table = dev_pm_opp_set_clkname(&pdev->dev, "se");
+ if (IS_ERR(mas->se.opp_table))
+ return PTR_ERR(mas->se.opp_table);
+ /* OPP table is optional */
+ ret = dev_pm_opp_of_add_table(&pdev->dev);
+ if (!ret) {
+ mas->se.has_opp_table = true;
+ } else if (ret != -ENODEV) {
+ dev_err(&pdev->dev, "invalid OPP table in device tree\n");
+ return ret;
+ }
spi->bus_num = -1;
spi->dev.of_node = dev->of_node;
@@ -596,6 +607,9 @@ static int spi_geni_probe(struct platform_device *pdev)
spi_geni_probe_runtime_disable:
pm_runtime_disable(dev);
spi_master_put(spi);
+ if (mas->se.has_opp_table)
+ dev_pm_opp_of_remove_table(&pdev->dev);
+ dev_pm_opp_put_clkname(mas->se.opp_table);
return ret;
}
@@ -604,6 +618,9 @@ static int spi_geni_remove(struct platform_device *pdev)
struct spi_master *spi = platform_get_drvdata(pdev);
struct spi_geni_master *mas = spi_master_get_devdata(spi);
+ if (mas->se.has_opp_table)
+ dev_pm_opp_of_remove_table(&pdev->dev);
+ dev_pm_opp_put_clkname(mas->se.opp_table);
/* Unregister _before_ disabling pm_runtime() so we stop transfers */
spi_unregister_master(spi);
@@ -617,6 +634,9 @@ static int __maybe_unused spi_geni_runtime_suspend(struct device *dev)
struct spi_master *spi = dev_get_drvdata(dev);
struct spi_geni_master *mas = spi_master_get_devdata(spi);
+ /* Drop the performance state vote */
+ dev_pm_opp_set_rate(dev, 0);
+
return geni_se_resources_off(&mas->se);
}


--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation