Re: [PATCH v3 2/4] arm64: dts: rockchip: Add RGA support to the PX30

[Johan Jonker]

Hi Paul,

On 5/7/20 10:25 PM, Paul Kocialkowski wrote:
> Hi,
> 
> On Fri 01 May 20, 00:05, Johan Jonker wrote:
>> Hi Paul,
>>
>>> The PX30 features a RGA block: add the necessary node to support it.
>>>
>>> Signed-off-by: Paul Kocialkowski <paul.kocialkowski@xxxxxxxxxxx>
>>> ---
>>>  arch/arm64/boot/dts/rockchip/px30.dtsi | 11 +++++++++++
>>>  1 file changed, 11 insertions(+)
>>>
>>> diff --git a/arch/arm64/boot/dts/rockchip/px30.dtsi b/arch/arm64/boot/dts/rockchip/px30.dtsi
>>> index f809dd6d5dc3..3de70aa4f1ce 100644
>>> --- a/arch/arm64/boot/dts/rockchip/px30.dtsi
>>> +++ b/arch/arm64/boot/dts/rockchip/px30.dtsi
>>> @@ -1102,6 +1102,17 @@ vopl_mmu: iommu@ff470f00 {
>>>  		status = "disabled";
>>>  	};
>>>  
>>> +	rga: rga@ff480000 {
>>> +		compatible = "rockchip,px30-rga", "rockchip,rk3288-rga";
>>> +		reg = <0x0 0xff480000 0x0 0x10000>;
>>> +		interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH 0>;
>>> +		clocks = <&cru ACLK_RGA>, <&cru HCLK_RGA>, <&cru SCLK_RGA_CORE>;
>>> +		clock-names = "aclk", "hclk", "sclk";
>>
>>> +		resets = <&cru SRST_RGA>, <&cru SRST_RGA_A>, <&cru SRST_RGA_H>;
>>> +		reset-names = "core", "axi", "ahb";
>>> +		power-domains = <&power PX30_PD_VO>;
>>
>> sort
>>
>> 		power-domains = <&power PX30_PD_VO>;
>> 		resets = <&cru SRST_RGA>, <&cru SRST_RGA_A>, <&cru SRST_RGA_H>;
>> 		reset-names = "core", "axi", "ahb";
> 
> What's the rationale behind this (besides alphabetic sorting, which I don't
> believe is a rule for dt properties)? Some nodes above in the file have it in
> the same order that I do, and I like to see clocks followed by resets.

My short list.
There is no hard rule... It mostly depend on Heiko...

For nodes:
If exists on top: model, compatible and chosen.
Sort things without reg alphabetical first,
then sort the rest by reg address.

Inside nodes:
If exists on top: compatible, reg and interrupts.
In alphabetical order the required properties.
Then in alphabetical order the other properties.
And as last things that start with '#' in alphabetical order.
Add status below all other properties for soc internal components with
any board-specifics.
Keep an empty line between properties and nodes.

Exceptions:
Sort pinctrl-0 above pinctrl-names, so it stays in line with clock-names
and dma-names.
Sort simple-audio-card,name above other simple-audio-card properties.
Sort regulator-name above other regulator properties.
Sort regulator-min-microvolt above regulator-max-microvolt.

> 
> Cheers,
> 
> Paul
> 
>>
>>
>>> +	};
>>> +
>>>  	qos_gmac: qos@ff518000 {
>>>  		compatible = "syscon";
>>>  		reg = <0x0 0xff518000 0x0 0x20>;
>>> -- 
>>> 2.26.0
>>
>