[PATCH v3 0/4] Enable stmpe811 touch screen on stm32f429-disco board

[dillon . minfei]

From: dillon min <dillon.minfei@xxxxxxxxx>

This patchset is intend to enable stmpe811 touch screen on stm32f429-disco
board with three dts and one i2c driver changes.

has been validated by ts_print tool

Changes log:

V3: just add change log in [PATCH V3 3/4] below ---

V2: remove id, blocks, irq-trigger from stmpe811 dts

V1:
    ARM: dts: stm32: add I2C3 support on STM32F429 SoC
    ARM: dts: stm32: Add pin map for I2C3 controller on stm32f4
    ARM: dts: stm32: enable stmpe811 on stm32429-disco board
    i2c: stm32f4: Fix stmpe811 get xyz data timeout issue

dillon min (4):
  ARM: dts: stm32: add I2C3 support on STM32F429 SoC
  ARM: dts: stm32: Add pin map for I2C3 controller on stm32f4
  ARM: dts: stm32: enable stmpe811 on stm32429-disco board
  i2c: stm32f4: Fix stmpe811 get xyz data timeout issue

 arch/arm/boot/dts/stm32f4-pinctrl.dtsi | 12 +++++++++
 arch/arm/boot/dts/stm32f429-disco.dts  | 47 ++++++++++++++++++++++++++++++++++
 arch/arm/boot/dts/stm32f429.dtsi       | 12 +++++++++
 drivers/i2c/busses/i2c-stm32f4.c       |  6 ++---
 4 files changed, 74 insertions(+), 3 deletions(-)

-- 
2.7.4