[PATCH 4.4 302/312] pinctrl: tegra: Correctly check the supported configuration

From: Greg Kroah-Hartman
Date: Fri May 08 2020 - 09:12:48 EST


From: Laxman Dewangan <ldewangan@xxxxxxxxxx>

commit b22ef2a0979f2b91cfeeabb086e4d665183a93a1 upstream.

The pincontrol registers of Tegra chips has multiple filed per
registers. There is two type of registers mux and drive. All
configurations belongs to one of these registers.

If any configurations are supported then <config>_bit is set to
bit position of these registers otherwise -1 to not support it.
The member is defined as
s32 <config>_bit:6;

So if config is not supported ifor given SoC then it is set to -1
in soc pinmmux table.
In common driver code, to find out that given config is supported
or not, it is checked as:

s8 bit = <config>_bit;
if (bit > 31) {
/* Not supported config */
}

But in this case, bit is s8 and hence for non supporting it is -1.

Correct the check as:
if (bit < 0) {
/* Not supported config */
}

Fixes: e4c02dced975cb ("pinctrl: tegra: use signed bitfields for optional fields")
Signed-off-by: Laxman Dewangan <ldewangan@xxxxxxxxxx>
Acked-by: Stephen Warren <swarren@xxxxxxxxxx>
Signed-off-by: Linus Walleij <linus.walleij@xxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>

---
drivers/pinctrl/pinctrl-tegra.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/pinctrl/pinctrl-tegra.c
+++ b/drivers/pinctrl/pinctrl-tegra.c
@@ -418,7 +418,7 @@ static int tegra_pinconf_reg(struct tegr
return -ENOTSUPP;
}

- if (*reg < 0 || *bit > 31) {
+ if (*reg < 0 || *bit < 0) {
if (report_err) {
const char *prop = "unknown";
int i;