[PATCH 4.4 154/312] net: phy: bcm7xxx: Fix shadow mode 2 disabling

[Greg Kroah-Hartman]

From: Florian Fainelli <f.fainelli@xxxxxxxxx>

commit 50d899808d33a5b0aa82be23e824119944042689 upstream.

The clear and set masks in the call to phy_set_clr_bits() called from
bcm7xxx_config_init() are inverted. We need to fix this by swapping the two
arguments, that is, set 0 bits, but clear the shade mode 2 enable bit.

Fixes: b560a58c45c66 ("net: phy: add Broadcom BCM7xxx internal PHY driver")
Signed-off-by: Florian Fainelli <f.fainelli@xxxxxxxxx>
Signed-off-by: David S. Miller <davem@xxxxxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>

---
 drivers/net/phy/bcm7xxx.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/net/phy/bcm7xxx.c
+++ b/drivers/net/phy/bcm7xxx.c
@@ -270,7 +270,7 @@ static int bcm7xxx_config_init(struct ph
 	phy_write(phydev, MII_BCM7XXX_100TX_FALSE_CAR, 0x7555);
 
 	/* reset shadow mode 2 */
-	ret = phy_set_clr_bits(phydev, MII_BCM7XXX_TEST, MII_BCM7XXX_SHD_MODE_2, 0);
+	ret = phy_set_clr_bits(phydev, MII_BCM7XXX_TEST, 0, MII_BCM7XXX_SHD_MODE_2);
 	if (ret < 0)
 		return ret;