[PATCH net] net: broadcom: Imply BROADCOM_PHY for BCMGENET

[Florian Fainelli]

The GENET controller on the Raspberry Pi 4 (2711) is typically
interfaced with an external Broadcom PHY via a RGMII electrical
interface. To make sure that delays are properly configured at the PHY
side, ensure that we get a chance to have the dedicated Broadcom PHY
driver (CONFIG_BROADCOM_PHY) enabled for this to happen.

Fixes: 402482a6a78e ("net: bcmgenet: Clear ID_MODE_DIS in EXT_RGMII_OOB_CTRL when not needed")
Reported-by: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
Signed-off-by: Florian Fainelli <f.fainelli@xxxxxxxxx>
---
David,

I would like Marek to indicate whether he is okay or not with this
change. Thanks!

 drivers/net/ethernet/broadcom/Kconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/ethernet/broadcom/Kconfig b/drivers/net/ethernet/broadcom/Kconfig
index 53055ce5dfd6..8a70b9152f7c 100644
--- a/drivers/net/ethernet/broadcom/Kconfig
+++ b/drivers/net/ethernet/broadcom/Kconfig
@@ -69,6 +69,7 @@ config BCMGENET
 	select BCM7XXX_PHY
 	select MDIO_BCM_UNIMAC
 	select DIMLIB
+	imply BROADCOM_PHY if ARCH_BCM2835
 	help
 	  This driver supports the built-in Ethernet MACs found in the
 	  Broadcom BCM7xxx Set Top Box family chipset.
-- 
2.17.1