[PATCH] dt-bindings: reset: Convert i.MX7 reset to json-schema

[Anson Huang]

Convert the i.MX7 reset binding to DT schema format using json-schema.

Signed-off-by: Anson Huang <Anson.Huang@xxxxxxx>
---
 .../devicetree/bindings/reset/fsl,imx7-src.txt     | 56 -------------------
 .../devicetree/bindings/reset/fsl,imx7-src.yaml    | 64 ++++++++++++++++++++++
 2 files changed, 64 insertions(+), 56 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/reset/fsl,imx7-src.txt
 create mode 100644 Documentation/devicetree/bindings/reset/fsl,imx7-src.yaml

diff --git a/Documentation/devicetree/bindings/reset/fsl,imx7-src.txt b/Documentation/devicetree/bindings/reset/fsl,imx7-src.txt
deleted file mode 100644
index e10502d..0000000
--- a/Documentation/devicetree/bindings/reset/fsl,imx7-src.txt
+++ /dev/null
@@ -1,56 +0,0 @@
-Freescale i.MX7 System Reset Controller
-======================================
-
-Please also refer to reset.txt in this directory for common reset
-controller binding usage.
-
-Required properties:
-- compatible:
-	- For i.MX7 SoCs should be "fsl,imx7d-src", "syscon"
-	- For i.MX8MQ SoCs should be "fsl,imx8mq-src", "syscon"
-	- For i.MX8MM SoCs should be "fsl,imx8mm-src", "fsl,imx8mq-src", "syscon"
-	- For i.MX8MN SoCs should be "fsl,imx8mn-src", "fsl,imx8mq-src", "syscon"
-	- For i.MX8MP SoCs should be "fsl,imx8mp-src", "syscon"
-- reg: should be register base and length as documented in the
-  datasheet
-- interrupts: Should contain SRC interrupt
-- #reset-cells: 1, see below
-
-example:
-
-src: reset-controller@30390000 {
-     compatible = "fsl,imx7d-src", "syscon";
-     reg = <0x30390000 0x2000>;
-     interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
-     #reset-cells = <1>;
-};
-
-
-Specifying reset lines connected to IP modules
-==============================================
-
-The system reset controller can be used to reset various set of
-peripherals. Device nodes that need access to reset lines should
-specify them as a reset phandle in their corresponding node as
-specified in reset.txt.
-
-Example:
-
-	pcie: pcie@33800000 {
-
-		...
-
-		resets = <&src IMX7_RESET_PCIEPHY>,
-			 <&src IMX7_RESET_PCIE_CTRL_APPS_EN>;
-		reset-names = "pciephy", "apps";
-
-		...
-        };
-
-
-For list of all valid reset indices see
-<dt-bindings/reset/imx7-reset.h> for i.MX7,
-<dt-bindings/reset/imx8mq-reset.h> for i.MX8MQ and
-<dt-bindings/reset/imx8mq-reset.h> for i.MX8MM and
-<dt-bindings/reset/imx8mq-reset.h> for i.MX8MN and
-<dt-bindings/reset/imx8mp-reset.h> for i.MX8MP
diff --git a/Documentation/devicetree/bindings/reset/fsl,imx7-src.yaml b/Documentation/devicetree/bindings/reset/fsl,imx7-src.yaml
new file mode 100644
index 0000000..ad254ba
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/fsl,imx7-src.yaml
@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reset/fsl,imx7-src.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX7 System Reset Controller
+
+maintainers:
+  - Anson Huang <Anson.Huang@xxxxxxx>
+
+description: |
+  The system reset controller can be used to reset various set of
+  peripherals. Device nodes that need access to reset lines should
+  specify them as a reset phandle in their corresponding node as
+  specified in reset.txt.
+
+  For list of all valid reset indices see
+    <dt-bindings/reset/imx7-reset.h> for i.MX7,
+    <dt-bindings/reset/imx8mq-reset.h> for i.MX8MQ and
+    <dt-bindings/reset/imx8mq-reset.h> for i.MX8MM and
+    <dt-bindings/reset/imx8mq-reset.h> for i.MX8MN and
+    <dt-bindings/reset/imx8mp-reset.h> for i.MX8MP
+
+properties:
+  compatible:
+    items:
+      - enum:
+        - fsl,imx7d-src
+        - fsl,imx8mq-src
+        - fsl,imx8mm-src
+        - fsl,imx8mn-src
+        - fsl,imx8mp-src
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  '#reset-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - '#reset-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    reset-controller@30390000 {
+        compatible = "fsl,imx7d-src", "syscon";
+        reg = <0x30390000 0x2000>;
+        interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+        #reset-cells = <1>;
+    };
+
+...
-- 
2.7.4