[PATCH v5 12/16] powerpc/watchpoint: Use builtin ALIGN*() macros
From: Ravi Bangoria
Date: Sun May 10 2020 - 23:00:39 EST
Currently we calculate hw aligned start and end addresses manually.
Replace them with builtin ALIGN_DOWN() and ALIGN() macros.
So far end_addr was inclusive but this patch makes it exclusive (by
avoiding -1) for better readability.
Suggested-by: Christophe Leroy <christophe.leroy@xxxxxx>
Signed-off-by: Ravi Bangoria <ravi.bangoria@xxxxxxxxxxxxx>
Reviewed-by: Michael Neuling <mikey@xxxxxxxxxxx>
---
arch/powerpc/include/asm/hw_breakpoint.h | 5 +++--
arch/powerpc/kernel/hw_breakpoint.c | 12 ++++++------
arch/powerpc/kernel/process.c | 8 ++++----
arch/powerpc/kernel/ptrace/ptrace-noadv.c | 2 +-
4 files changed, 14 insertions(+), 13 deletions(-)
diff --git a/arch/powerpc/include/asm/hw_breakpoint.h b/arch/powerpc/include/asm/hw_breakpoint.h
index d472b2eb757e..add5aa076919 100644
--- a/arch/powerpc/include/asm/hw_breakpoint.h
+++ b/arch/powerpc/include/asm/hw_breakpoint.h
@@ -34,10 +34,11 @@ struct arch_hw_breakpoint {
#define HW_BRK_TYPE_PRIV_ALL (HW_BRK_TYPE_USER | HW_BRK_TYPE_KERNEL | \
HW_BRK_TYPE_HYP)
+/* Minimum granularity */
#ifdef CONFIG_PPC_8xx
-#define HW_BREAKPOINT_ALIGN 0x3
+#define HW_BREAKPOINT_SIZE 0x4
#else
-#define HW_BREAKPOINT_ALIGN 0x7
+#define HW_BREAKPOINT_SIZE 0x8
#endif
#define DABR_MAX_LEN 8
diff --git a/arch/powerpc/kernel/hw_breakpoint.c b/arch/powerpc/kernel/hw_breakpoint.c
index 319a761b7412..ab0dd22fed5f 100644
--- a/arch/powerpc/kernel/hw_breakpoint.c
+++ b/arch/powerpc/kernel/hw_breakpoint.c
@@ -145,10 +145,10 @@ int arch_bp_generic_fields(int type, int *gen_bp_type)
* <---8 bytes--->
*
* In this case, we should configure hw as:
- * start_addr = address & ~HW_BREAKPOINT_ALIGN
+ * start_addr = address & ~(HW_BREAKPOINT_SIZE - 1)
* len = 16 bytes
*
- * @start_addr and @end_addr are inclusive.
+ * @start_addr is inclusive but @end_addr is exclusive.
*/
static int hw_breakpoint_validate_len(struct arch_hw_breakpoint *hw)
{
@@ -156,14 +156,14 @@ static int hw_breakpoint_validate_len(struct arch_hw_breakpoint *hw)
u16 hw_len;
unsigned long start_addr, end_addr;
- start_addr = hw->address & ~HW_BREAKPOINT_ALIGN;
- end_addr = (hw->address + hw->len - 1) | HW_BREAKPOINT_ALIGN;
- hw_len = end_addr - start_addr + 1;
+ start_addr = ALIGN_DOWN(hw->address, HW_BREAKPOINT_SIZE);
+ end_addr = ALIGN(hw->address + hw->len, HW_BREAKPOINT_SIZE);
+ hw_len = end_addr - start_addr;
if (dawr_enabled()) {
max_len = DAWR_MAX_LEN;
/* DAWR region can't cross 512 bytes boundary */
- if ((start_addr >> 9) != (end_addr >> 9))
+ if (ALIGN(start_addr, SZ_512M) != ALIGN(end_addr - 1, SZ_512M))
return -EINVAL;
} else if (IS_ENABLED(CONFIG_PPC_8xx)) {
/* 8xx can setup a range without limitation */
diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c
index 41a59a37383b..dcf9c5b4ac59 100644
--- a/arch/powerpc/kernel/process.c
+++ b/arch/powerpc/kernel/process.c
@@ -800,12 +800,12 @@ static inline int set_breakpoint_8xx(struct arch_hw_breakpoint *brk)
unsigned long lctrl1 = LCTRL1_CTE_GT | LCTRL1_CTF_LT | LCTRL1_CRWE_RW |
LCTRL1_CRWF_RW;
unsigned long lctrl2 = LCTRL2_LW0EN | LCTRL2_LW0LADC | LCTRL2_SLW0EN;
- unsigned long start_addr = brk->address & ~HW_BREAKPOINT_ALIGN;
- unsigned long end_addr = (brk->address + brk->len - 1) | HW_BREAKPOINT_ALIGN;
+ unsigned long start_addr = ALIGN_DOWN(brk->address, HW_BREAKPOINT_SIZE);
+ unsigned long end_addr = ALIGN(brk->address + brk->len, HW_BREAKPOINT_SIZE);
if (start_addr == 0)
lctrl2 |= LCTRL2_LW0LA_F;
- else if (end_addr == ~0U)
+ else if (end_addr == 0)
lctrl2 |= LCTRL2_LW0LA_E;
else
lctrl2 |= LCTRL2_LW0LA_EandF;
@@ -821,7 +821,7 @@ static inline int set_breakpoint_8xx(struct arch_hw_breakpoint *brk)
lctrl1 |= LCTRL1_CRWE_WO | LCTRL1_CRWF_WO;
mtspr(SPRN_CMPE, start_addr - 1);
- mtspr(SPRN_CMPF, end_addr + 1);
+ mtspr(SPRN_CMPF, end_addr);
mtspr(SPRN_LCTRL1, lctrl1);
mtspr(SPRN_LCTRL2, lctrl2);
diff --git a/arch/powerpc/kernel/ptrace/ptrace-noadv.c b/arch/powerpc/kernel/ptrace/ptrace-noadv.c
index 08cb8c1b504c..697c7e4b5877 100644
--- a/arch/powerpc/kernel/ptrace/ptrace-noadv.c
+++ b/arch/powerpc/kernel/ptrace/ptrace-noadv.c
@@ -216,7 +216,7 @@ long ppc_set_hwdebug(struct task_struct *child, struct ppc_hw_breakpoint *bp_inf
if ((unsigned long)bp_info->addr >= TASK_SIZE)
return -EIO;
- brk.address = bp_info->addr & ~HW_BREAKPOINT_ALIGN;
+ brk.address = ALIGN_DOWN(bp_info->addr, HW_BREAKPOINT_SIZE);
brk.type = HW_BRK_TYPE_TRANSLATE;
brk.len = DABR_MAX_LEN;
if (bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_READ)
--
2.21.1