Re: [net-next PATCH v3 4/5] net: phy: Introduce fwnode_get_phy_id()

[Andrew Lunn]

> NXP's LX2160ARDB platform currently has the following MDIO-PHY connection.
> 
> MDIO-1 ==> one 40G PHY, two 1G PHYs(C45), two 10G PHYs(C22)
> MDIO-2 ==> one 25G PHY

It has been suggested that ACPI only support a one to one
mapping. Each MAC has one MDIO bus, with one PHY on it. KISS.

This clearly does not work for your hardware. So not only do we need
to solve how PHY properties are described, we also need an equivalent
of phy-handle, so a MAC can indicate which PHY it is connected to.

So in effect, you seem to be heading towards a pretty full
reproduction of the DT binding. Before you go too much further and
waste too much of your time, you might want confirmation from the ACPI
people this is not too advanced for what ACPI can do and they tell you
to forget ACPI for this hardware and stick with DT.

   Andrew