Re: [PATCH v2 1/3] dt-bindings: mailbox: Add devicetree binding for Qcom IPCC

[Bjorn Andersson]

On Fri 08 May 11:27 PDT 2020, Manivannan Sadhasivam wrote:

> Add devicetree YAML binding for Qualcomm Inter-Processor Communication
> Controller (IPCC) block.
> 

Reviewed-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>

Regards,
Bjorn

> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
> ---
>  .../bindings/mailbox/qcom-ipcc.yaml           | 77 +++++++++++++++++++
>  include/dt-bindings/mailbox/qcom-ipcc.h       | 33 ++++++++
>  2 files changed, 110 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/mailbox/qcom-ipcc.yaml
>  create mode 100644 include/dt-bindings/mailbox/qcom-ipcc.h
> 
> diff --git a/Documentation/devicetree/bindings/mailbox/qcom-ipcc.yaml b/Documentation/devicetree/bindings/mailbox/qcom-ipcc.yaml
> new file mode 100644
> index 000000000000..62e7bc8ceb0b
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mailbox/qcom-ipcc.yaml
> @@ -0,0 +1,77 @@
> +# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/mailbox/qcom-ipcc.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Qualcomm Technologies, Inc. Inter-Processor Communication Controller
> +
> +maintainers:
> +  - Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
> +
> +description:
> +  The Inter-Processor Communication Controller (IPCC) is a centralized hardware
> +  to route interrupts across various subsystems. It involves a three-level
> +  addressing scheme called protocol, client and signal. For example, consider an
> +  entity on the Application Processor Subsystem (APSS) that wants to listen to
> +  Modem's interrupts via Shared Memory Point to Point (SMP2P) interface. In such
> +  a case, the client would be Modem (client-id is 2) and the signal would be
> +  SMP2P (signal-id is 2). The SMP2P itself falls under the Multiprocessor (MPROC)
> +  protocol (protocol-id is 0). Refer include/dt-bindings/mailbox/qcom-ipcc.h
> +  for the list of such IDs.
> +
> +properties:
> +  compatible:
> +    const: "qcom,ipcc"
> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  interrupt-controller: true
> +
> +  "#interrupt-cells":
> +    const: 3
> +    description:
> +      The first cell is the client-id, the second cell is the signal-id and the
> +      third cell is the interrupt type.
> +
> +  "#mbox-cells":
> +    const: 2
> +    description:
> +      The first cell is the client-id, and the second cell is the signal-id.
> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +  - interrupt-controller
> +  - "#interrupt-cells"
> +  - "#mbox-cells"
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +        #include <dt-bindings/interrupt-controller/arm-gic.h>
> +        #include <dt-bindings/mailbox/qcom-ipcc.h>
> +
> +        mailbox: qcom,ipcc@408000 {
> +                compatible = "qcom,ipcc";
> +                reg = <0x408000 0x1000>;
> +                interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
> +                interrupt-controller;
> +                #interrupt-cells = <3>;
> +                #mbox-cells = <2>;
> +        };
> +
> +        smp2p-modem {
> +                compatible = "qcom,smp2p";
> +                interrupts-extended = <&ipcc_mproc IPCC_CLIENT_MPSS
> +                                IPCC_MPROC_SIGNAL_SMP2P IRQ_TYPE_EDGE_RISING>;
> +                mboxes = <&ipcc_mproc IPCC_CLIENT_MPSS IPCC_MPROC_SIGNAL_SMP2P>;
> +
> +                /* Other SMP2P fields */
> +        };
> diff --git a/include/dt-bindings/mailbox/qcom-ipcc.h b/include/dt-bindings/mailbox/qcom-ipcc.h
> new file mode 100644
> index 000000000000..b8c04f6df57c
> --- /dev/null
> +++ b/include/dt-bindings/mailbox/qcom-ipcc.h
> @@ -0,0 +1,33 @@
> +/* SPDX-License-Identifier: GPL-2.0-only */
> +/*
> + * Copyright (c) 2018-2020, The Linux Foundation. All rights reserved.
> + */
> +
> +#ifndef __DT_BINDINGS_MAILBOX_IPCC_H
> +#define __DT_BINDINGS_MAILBOX_IPCC_H
> +
> +/* Signal IDs for MPROC protocol */
> +#define IPCC_MPROC_SIGNAL_GLINK_QMP	0
> +#define IPCC_MPROC_SIGNAL_SMP2P		2
> +#define IPCC_MPROC_SIGNAL_PING		3
> +
> +/* Client IDs */
> +#define IPCC_CLIENT_AOP			0
> +#define IPCC_CLIENT_TZ			1
> +#define IPCC_CLIENT_MPSS		2
> +#define IPCC_CLIENT_LPASS		3
> +#define IPCC_CLIENT_SLPI		4
> +#define IPCC_CLIENT_SDC			5
> +#define IPCC_CLIENT_CDSP		6
> +#define IPCC_CLIENT_NPU			7
> +#define IPCC_CLIENT_APSS		8
> +#define IPCC_CLIENT_GPU			9
> +#define IPCC_CLIENT_CVP			10
> +#define IPCC_CLIENT_CAM			11
> +#define IPCC_CLIENT_VPU			12
> +#define IPCC_CLIENT_PCIE0		13
> +#define IPCC_CLIENT_PCIE1		14
> +#define IPCC_CLIENT_PCIE2		15
> +#define IPCC_CLIENT_SPSS		16
> +
> +#endif
> -- 
> 2.17.1
>