[PATCH v2 3/6] phy: amlogic: meson8b-usb2: Use a MMIO regmap

From: Martin Blumenstingl
Date: Tue May 12 2020 - 18:24:47 EST


Using a MMIO regmap and switch to regmap_update_bits() to simplify the
code in the driver. Also switch to devm_platform_ioremap_resource()
instead of open-coding it. No functional changes intended.

Tested-by: Thomas Graichen <thomas.graichen@xxxxxxxxx>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
---
drivers/phy/amlogic/Kconfig | 1 +
drivers/phy/amlogic/phy-meson8b-usb2.c | 73 ++++++++++++--------------
2 files changed, 35 insertions(+), 39 deletions(-)

diff --git a/drivers/phy/amlogic/Kconfig b/drivers/phy/amlogic/Kconfig
index 71801e30d601..3495b23af797 100644
--- a/drivers/phy/amlogic/Kconfig
+++ b/drivers/phy/amlogic/Kconfig
@@ -9,6 +9,7 @@ config PHY_MESON8B_USB2
depends on USB_SUPPORT
select USB_COMMON
select GENERIC_PHY
+ select REGMAP_MMIO
help
Enable this to support the Meson USB2 PHYs found in Meson8,
Meson8b and GXBB SoCs.
diff --git a/drivers/phy/amlogic/phy-meson8b-usb2.c b/drivers/phy/amlogic/phy-meson8b-usb2.c
index bd66bd723e4a..86824cc21f11 100644
--- a/drivers/phy/amlogic/phy-meson8b-usb2.c
+++ b/drivers/phy/amlogic/phy-meson8b-usb2.c
@@ -10,6 +10,7 @@
#include <linux/io.h>
#include <linux/module.h>
#include <linux/of_device.h>
+#include <linux/regmap.h>
#include <linux/reset.h>
#include <linux/phy/phy.h>
#include <linux/platform_device.h>
@@ -105,34 +106,24 @@
#define ACA_ENABLE_COMPLETE_TIME 50

struct phy_meson8b_usb2_priv {
- void __iomem *regs;
+ struct regmap *regmap;
enum usb_dr_mode dr_mode;
struct clk *clk_usb_general;
struct clk *clk_usb;
struct reset_control *reset;
};

-static u32 phy_meson8b_usb2_read(struct phy_meson8b_usb2_priv *phy_priv,
- u32 reg)
-{
- return readl(phy_priv->regs + reg);
-}
-
-static void phy_meson8b_usb2_mask_bits(struct phy_meson8b_usb2_priv *phy_priv,
- u32 reg, u32 mask, u32 value)
-{
- u32 data;
-
- data = phy_meson8b_usb2_read(phy_priv, reg);
- data &= ~mask;
- data |= (value & mask);
-
- writel(data, phy_priv->regs + reg);
-}
+static const struct regmap_config phy_meson8b_usb2_regmap_conf = {
+ .reg_bits = 8,
+ .val_bits = 32,
+ .reg_stride = 4,
+ .max_register = REG_TUNE,
+};

static int phy_meson8b_usb2_power_on(struct phy *phy)
{
struct phy_meson8b_usb2_priv *priv = phy_get_drvdata(phy);
+ u32 reg;
int ret;

if (!IS_ERR_OR_NULL(priv->reset)) {
@@ -156,34 +147,34 @@ static int phy_meson8b_usb2_power_on(struct phy *phy)
return ret;
}

- phy_meson8b_usb2_mask_bits(priv, REG_CONFIG, REG_CONFIG_CLK_32k_ALTSEL,
- REG_CONFIG_CLK_32k_ALTSEL);
+ regmap_update_bits(priv->regmap, REG_CONFIG, REG_CONFIG_CLK_32k_ALTSEL,
+ REG_CONFIG_CLK_32k_ALTSEL);

- phy_meson8b_usb2_mask_bits(priv, REG_CTRL, REG_CTRL_REF_CLK_SEL_MASK,
- 0x2 << REG_CTRL_REF_CLK_SEL_SHIFT);
+ regmap_update_bits(priv->regmap, REG_CTRL, REG_CTRL_REF_CLK_SEL_MASK,
+ 0x2 << REG_CTRL_REF_CLK_SEL_SHIFT);

- phy_meson8b_usb2_mask_bits(priv, REG_CTRL, REG_CTRL_FSEL_MASK,
- 0x5 << REG_CTRL_FSEL_SHIFT);
+ regmap_update_bits(priv->regmap, REG_CTRL, REG_CTRL_FSEL_MASK,
+ 0x5 << REG_CTRL_FSEL_SHIFT);

/* reset the PHY */
- phy_meson8b_usb2_mask_bits(priv, REG_CTRL, REG_CTRL_POWER_ON_RESET,
- REG_CTRL_POWER_ON_RESET);
+ regmap_update_bits(priv->regmap, REG_CTRL, REG_CTRL_POWER_ON_RESET,
+ REG_CTRL_POWER_ON_RESET);
udelay(RESET_COMPLETE_TIME);
- phy_meson8b_usb2_mask_bits(priv, REG_CTRL, REG_CTRL_POWER_ON_RESET, 0);
+ regmap_update_bits(priv->regmap, REG_CTRL, REG_CTRL_POWER_ON_RESET, 0);
udelay(RESET_COMPLETE_TIME);

- phy_meson8b_usb2_mask_bits(priv, REG_CTRL, REG_CTRL_SOF_TOGGLE_OUT,
- REG_CTRL_SOF_TOGGLE_OUT);
+ regmap_update_bits(priv->regmap, REG_CTRL, REG_CTRL_SOF_TOGGLE_OUT,
+ REG_CTRL_SOF_TOGGLE_OUT);

if (priv->dr_mode == USB_DR_MODE_HOST) {
- phy_meson8b_usb2_mask_bits(priv, REG_ADP_BC,
- REG_ADP_BC_ACA_ENABLE,
- REG_ADP_BC_ACA_ENABLE);
+ regmap_update_bits(priv->regmap, REG_ADP_BC,
+ REG_ADP_BC_ACA_ENABLE,
+ REG_ADP_BC_ACA_ENABLE);

udelay(ACA_ENABLE_COMPLETE_TIME);

- if (phy_meson8b_usb2_read(priv, REG_ADP_BC) &
- REG_ADP_BC_ACA_PIN_FLOAT) {
+ regmap_read(priv->regmap, REG_ADP_BC, &reg);
+ if (reg & REG_ADP_BC_ACA_PIN_FLOAT) {
dev_warn(&phy->dev, "USB ID detect failed!\n");
clk_disable_unprepare(priv->clk_usb);
clk_disable_unprepare(priv->clk_usb_general);
@@ -213,18 +204,22 @@ static const struct phy_ops phy_meson8b_usb2_ops = {
static int phy_meson8b_usb2_probe(struct platform_device *pdev)
{
struct phy_meson8b_usb2_priv *priv;
- struct resource *res;
struct phy *phy;
struct phy_provider *phy_provider;
+ void __iomem *base;

priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
if (!priv)
return -ENOMEM;

- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- priv->regs = devm_ioremap_resource(&pdev->dev, res);
- if (IS_ERR(priv->regs))
- return PTR_ERR(priv->regs);
+ base = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(base))
+ return PTR_ERR(base);
+
+ priv->regmap = devm_regmap_init_mmio(&pdev->dev, base,
+ &phy_meson8b_usb2_regmap_conf);
+ if (IS_ERR(priv->regmap))
+ return PTR_ERR(priv->regmap);

priv->clk_usb_general = devm_clk_get(&pdev->dev, "usb_general");
if (IS_ERR(priv->clk_usb_general))
--
2.26.2