Re: [PATCH 3/4] hwspinlock: qcom: Allow mmio usage in addition to syscon

[Baolin Wang]

On Wed, May 13, 2020 at 8:55 AM Bjorn Andersson
<bjorn.andersson@xxxxxxxxxx> wrote:
>
> In all modern Qualcomm platforms the mutex region of the TCSR is forked
> off into its own block, all with a offset of 0 and stride of 4096. So
> add support for directly memory mapping this register space, to avoid
> the need to represent this block using a syscon.
>
> Signed-off-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
> ---
>  drivers/hwspinlock/qcom_hwspinlock.c | 72 +++++++++++++++++++++-------
>  1 file changed, 56 insertions(+), 16 deletions(-)
>
> diff --git a/drivers/hwspinlock/qcom_hwspinlock.c b/drivers/hwspinlock/qcom_hwspinlock.c
> index f0da544b14d2..d8d4d729816c 100644
> --- a/drivers/hwspinlock/qcom_hwspinlock.c
> +++ b/drivers/hwspinlock/qcom_hwspinlock.c
> @@ -70,41 +70,81 @@ static const struct of_device_id qcom_hwspinlock_of_match[] = {
>  };
>  MODULE_DEVICE_TABLE(of, qcom_hwspinlock_of_match);
>
> -static int qcom_hwspinlock_probe(struct platform_device *pdev)
> +static struct regmap *qcom_hwspinlock_probe_syscon(struct platform_device *pdev,
> +                                                  u32 *base, u32 *stride)
>  {
> -       struct hwspinlock_device *bank;
>         struct device_node *syscon;
> -       struct reg_field field;
>         struct regmap *regmap;
> -       size_t array_size;
> -       u32 stride;
> -       u32 base;
>         int ret;
> -       int i;
>
>         syscon = of_parse_phandle(pdev->dev.of_node, "syscon", 0);
> -       if (!syscon) {
> -               dev_err(&pdev->dev, "no syscon property\n");
> -               return -ENODEV;
> -       }
> +       if (!syscon)
> +               return ERR_PTR(-ENODEV);
>
>         regmap = syscon_node_to_regmap(syscon);
>         of_node_put(syscon);
>         if (IS_ERR(regmap))
> -               return PTR_ERR(regmap);
> +               return regmap;
>
> -       ret = of_property_read_u32_index(pdev->dev.of_node, "syscon", 1, &base);
> +       ret = of_property_read_u32_index(pdev->dev.of_node, "syscon", 1, base);
>         if (ret < 0) {
>                 dev_err(&pdev->dev, "no offset in syscon\n");
> -               return -EINVAL;
> +               return ERR_PTR(-EINVAL);
>         }
>
> -       ret = of_property_read_u32_index(pdev->dev.of_node, "syscon", 2, &stride);
> +       ret = of_property_read_u32_index(pdev->dev.of_node, "syscon", 2, stride);
>         if (ret < 0) {
>                 dev_err(&pdev->dev, "no stride syscon\n");
> -               return -EINVAL;
> +               return ERR_PTR(-EINVAL);
>         }
>
> +       return regmap;
> +}
> +
> +static const struct regmap_config tcsr_mutex_config = {
> +       .reg_bits               = 32,
> +       .reg_stride             = 4,
> +       .val_bits               = 32,
> +       .max_register           = 0x40000,
> +       .fast_io                = true,
> +};
> +
> +static struct regmap *qcom_hwspinlock_probe_mmio(struct platform_device *pdev,
> +                                                u32 *offset, u32 *stride)
> +{
> +       struct device *dev = &pdev->dev;
> +       struct resource *res;
> +       void __iomem *base;
> +
> +       /* All modern platform has offset 0 and stride of 4k */
> +       *offset = 0;
> +       *stride = 0x1000;
> +
> +       res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +       base = devm_ioremap_resource(&pdev->dev, res);

I think you can use devm_platform_ioremap_resource(pdev, 0) to
simplify your code, otherwise looks good to me.
Reviewed-by: Baolin Wang <baolin.wang7@xxxxxxxxx>

> +       if (IS_ERR(base))
> +               return ERR_CAST(base);
> +
> +       return devm_regmap_init_mmio(dev, base, &tcsr_mutex_config);
> +}
> +
> +static int qcom_hwspinlock_probe(struct platform_device *pdev)
> +{
> +       struct hwspinlock_device *bank;
> +       struct reg_field field;
> +       struct regmap *regmap;
> +       size_t array_size;
> +       u32 stride;
> +       u32 base;
> +       int i;
> +
> +       regmap = qcom_hwspinlock_probe_syscon(pdev, &base, &stride);
> +       if (IS_ERR(regmap) && PTR_ERR(regmap) == -ENODEV)
> +               regmap = qcom_hwspinlock_probe_mmio(pdev, &base, &stride);
> +
> +       if (IS_ERR(regmap))
> +               return PTR_ERR(regmap);
> +
>         array_size = QCOM_MUTEX_NUM_LOCKS * sizeof(struct hwspinlock);
>         bank = devm_kzalloc(&pdev->dev, sizeof(*bank) + array_size, GFP_KERNEL);
>         if (!bank)
> --
> 2.26.2
>


-- 
Baolin Wang