[PATCH v3 4/7] mfd: arizona: Move binding over to dtschema
From: Charles Keepax
Date: Wed May 13 2020 - 05:57:53 EST
Signed-off-by: Charles Keepax <ckeepax@xxxxxxxxxxxxxxxxxxxxx>
---
Changes since v2:
- Removed a couple more redundant descriptions
Thanks,
Charles
Documentation/devicetree/bindings/mfd/arizona.txt | 101 -------
.../devicetree/bindings/mfd/wlf,arizona.yaml | 289 +++++++++++++++++++++
MAINTAINERS | 8 +-
3 files changed, 293 insertions(+), 105 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/mfd/arizona.txt
create mode 100644 Documentation/devicetree/bindings/mfd/wlf,arizona.yaml
diff --git a/Documentation/devicetree/bindings/mfd/arizona.txt b/Documentation/devicetree/bindings/mfd/arizona.txt
deleted file mode 100644
index 148ef621a5e5d..0000000000000
--- a/Documentation/devicetree/bindings/mfd/arizona.txt
+++ /dev/null
@@ -1,101 +0,0 @@
-Cirrus Logic/Wolfson Microelectronics Arizona class audio SoCs
-
-These devices are audio SoCs with extensive digital capabilities and a range
-of analogue I/O.
-
-Required properties:
-
- - compatible : One of the following chip-specific strings:
- "cirrus,cs47l24"
- "wlf,wm5102"
- "wlf,wm5110"
- "wlf,wm8280"
- "wlf,wm8997"
- "wlf,wm8998"
- "wlf,wm1814"
- "wlf,wm1831"
-
- - reg : I2C slave address when connected using I2C, chip select number when
- using SPI.
-
- - interrupts : The interrupt line the /IRQ signal for the device is
- connected to.
- - interrupt-controller : Arizona class devices contain interrupt controllers
- and may provide interrupt services to other devices.
- - #interrupt-cells: the number of cells to describe an IRQ, this should be 2.
- The first cell is the IRQ number.
- The second cell is the flags, encoded as the trigger masks from
- Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
-
- - gpio-controller : Indicates this device is a GPIO controller.
- - #gpio-cells : Must be 2. The first cell is the pin number and the
- second cell is used to specify optional parameters, see ../gpio/gpio.txt
- for details.
-
- - AVDD-supply, DBVDD1-supply, CPVDD-supply : Power supplies for the device,
- as covered in Documentation/devicetree/bindings/regulator/regulator.txt
-
- - DBVDD2-supply, DBVDD3-supply : Additional databus power supplies (wm5102,
- wm5110, wm8280, wm8998, wm1814)
-
- - SPKVDDL-supply, SPKVDDR-supply : Speaker driver power supplies (wm5102,
- wm5110, wm8280, wm8998, wm1814)
-
- - SPKVDD-supply : Speaker driver power supply (wm8997)
-
- - DCVDD-supply : Main power supply (cs47l24, wm1831)
-
- - MICVDD-supply : Microphone power supply (cs47l24, wm1831)
-
-Optional properties:
-
- - reset-gpios : GPIO specifier for the GPIO controlling /RESET
-
- - clocks: Should reference the clocks supplied on MCLK1 and MCLK2
- - clock-names: Should contains two strings:
- "mclk1" for the clock supplied on MCLK1, recommended to be a high
- quality audio reference clock
- "mclk2" for the clock supplied on MCLK2, recommended to be an always on
- 32k clock
-
- - wlf,gpio-defaults : A list of GPIO configuration register values. Defines
- for the appropriate values can found in <dt-bindings/mfd/arizona.txt>. If
- absent, no configuration of these registers is performed. If any entry has
- a value that is out of range for a 16 bit register then the chip default
- will be used. If present exactly five values must be specified.
-
- - DCVDD-supply, MICVDD-supply : Power supplies, only need to be specified if
- they are being externally supplied. As covered in
- Documentation/devicetree/bindings/regulator/regulator.txt
- (wm5102, wm5110, wm8280, wm8997, wm8998, wm1814)
-
-Deprecated properties:
-
- - wlf,reset : GPIO specifier for the GPIO controlling /RESET
-
-Also see child specific device properties:
- Regulator - ../regulator/arizona-regulator.txt
- Extcon - ../extcon/extcon-arizona.txt
- Sound - ../sound/wlf,arizona.txt
-
-Example:
-
-codec: wm5102@1a {
- compatible = "wlf,wm5102";
- reg = <0x1a>;
- interrupts = <347>;
- interrupt-controller;
- #interrupt-cells = <2>;
- interrupt-parent = <&gic>;
-
- gpio-controller;
- #gpio-cells = <2>;
-
- wlf,gpio-defaults = <
- ARIZONA_GP_FN_TXLRCLK
- ARIZONA_GP_DEFAULT
- ARIZONA_GP_DEFAULT
- ARIZONA_GP_DEFAULT
- ARIZONA_GP_DEFAULT
- >;
-};
diff --git a/Documentation/devicetree/bindings/mfd/wlf,arizona.yaml b/Documentation/devicetree/bindings/mfd/wlf,arizona.yaml
new file mode 100644
index 0000000000000..14b6aac64a7e0
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/wlf,arizona.yaml
@@ -0,0 +1,289 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/wlf,arizona.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cirrus Logic/Wolfson Microelectronics Arizona class audio SoCs
+
+maintainers:
+ - patches@xxxxxxxxxxxxxxxxxxxxx
+
+description: |
+ These devices are audio SoCs with extensive digital capabilities and a
+ range of analogue I/O.
+
+allOf:
+ - $ref: /schemas/sound/wlf,arizona.yaml#
+ - $ref: /schemas/regulator/wlf,arizona.yaml#
+ - $ref: /schemas/extcon/wlf,arizona.yaml#
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - cirrus,cs47l24
+ - wlf,wm1831
+ then:
+ required:
+ - DCVDD-supply
+ - MICVDD-supply
+ else:
+ properties:
+ LDOVDD-supply:
+ description:
+ Digital power supply, used internally to generate DCVDD when
+ internally supplied.
+ $ref: /schemas/types.yaml#/definitions/phandle
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - wlf,wm1814
+ - wlf,wm5102
+ - wlf,wm5110
+ - wlf,wm8280
+ - wlf,wm8997
+ - wlf,wm8998
+ then:
+ properties:
+ DBVDD2-supply:
+ description:
+ Databus power supply.
+ $ref: /schemas/types.yaml#/definitions/phandle
+
+ required:
+ - DBVDD2-supply
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - wlf,wm1814
+ - wlf,wm5102
+ - wlf,wm5110
+ - wlf,wm8280
+ - wlf,wm8998
+ then:
+ properties:
+ DBVDD3-supply:
+ description:
+ Databus power supply.
+ $ref: /schemas/types.yaml#/definitions/phandle
+
+ required:
+ - DBVDD3-supply
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - cirrus,cs47l24
+ - wlf,wm1831
+ - wlf,wm8997
+ then:
+ properties:
+ SPKVDD-supply:
+ description:
+ Mono speaker driver power supply.
+ $ref: /schemas/types.yaml#/definitions/phandle
+
+ required:
+ - SPKVDD-supply
+ else:
+ properties:
+ SPKVDDL-supply:
+ description:
+ Left speaker driver power supply.
+ $ref: /schemas/types.yaml#/definitions/phandle
+
+ SPKVDDR-supply:
+ description:
+ Right speaker driver power supply.
+ $ref: /schemas/types.yaml#/definitions/phandle
+
+ required:
+ - SPKVDDL-supply
+ - SPKVDDR-supply
+
+properties:
+ compatible:
+ enum:
+ - cirrus,cs47l24
+ - wlf,wm1814
+ - wlf,wm1831
+ - wlf,wm5102
+ - wlf,wm5110
+ - wlf,wm8280
+ - wlf,wm8997
+ - wlf,wm8998
+
+ reg:
+ maxItems: 1
+
+ AVDD-supply:
+ description:
+ Analogue power supply.
+ $ref: /schemas/types.yaml#/definitions/phandle
+
+ CPVDD-supply:
+ description:
+ Charge pump power supply.
+ $ref: /schemas/types.yaml#/definitions/phandle
+
+ DBVDD1-supply:
+ description:
+ Databus power supply.
+ $ref: /schemas/types.yaml#/definitions/phandle
+
+ DCVDD-supply:
+ description:
+ Digital power supply, normally supplied internally except on cs47l24,
+ wm1831 where it is mandatory.
+ $ref: /schemas/types.yaml#/definitions/phandle
+
+ MICVDD-supply:
+ description:
+ Microphone power supply, normally supplied internally except on
+ cs47l24, wm1831 where it is mandatory.
+ $ref: /schemas/types.yaml#/definitions/phandle
+
+ gpio-controller: true
+
+ '#gpio-cells':
+ description:
+ The first cell is the pin number and the second cell is used to
+ specify optional parameters.
+ const: 2
+
+ wlf,gpio-defaults:
+ description:
+ A list of GPIO configuration register values. Defines for the
+ appropriate values can found in dt-bindings/mfd/arizona.h. If
+ absent, no configuration of these registers is performed. If any
+ entry has a value that is out of range for a 16 bit register then the
+ chip default will be used. If present exactly five values must be
+ specified.
+ $ref: "/schemas/types.yaml#/definitions/uint32-array"
+ minItems: 1
+ maxItems: 5
+
+ interrupt-controller: true
+
+ '#interrupt-cells':
+ description:
+ The first cell is the IRQ number. The second cell is the flags,
+ encoded as trigger masks.
+ const: 2
+
+ interrupts: true
+
+ clocks:
+ description:
+ Should reference the clocks supplied on MCLK1 and MCLK2.
+ minItems: 1
+ maxItems: 2
+
+ clock-names:
+ description:
+ Should contains two strings mclk1 for the clock supplied on MCLK1,
+ recommended to be a high quality audio reference clock mclk2 for the
+ clock supplied on MCLK2, recommended to be an always on 32k clock.
+ oneOf:
+ - items:
+ - const: mclk1
+ - items:
+ - const: mclk2
+ - items:
+ - const: mclk1
+ - const: mclk2
+
+ reset-gpios:
+ maxItems: 1
+
+ wlf,reset:
+ description:
+ GPIO specifier for the GPIO controlling RESET
+ deprecated: true
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ maxItems: 1
+
+required:
+ - compatible
+ - AVDD-supply
+ - CPVDD-supply
+ - DBVDD1-supply
+ - gpio-controller
+ - '#gpio-cells'
+ - interrupt-controller
+ - '#interrupt-cells'
+ - interrupts
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/mfd/arizona.h>
+ i2c@e0004000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0xe0004000 0x1000>;
+
+ wm5102: codec@1a {
+ compatible = "wlf,wm5102";
+ reg = <0x1a>;
+
+ reset-gpios = <&gpio 0>;
+ wlf,ldoena = <&gpio 1>;
+
+ AVDD-supply = <&vdd1v8>;
+ DBVDD1-supply = <&vdd1v8>;
+ DBVDD2-supply = <&vdd1v8>;
+ DBVDD3-supply = <&vdd1v8>;
+ CPVDD-supply = <&vdd1v8>;
+ LDOVDD-supply = <&vdd1v8>;
+ SPKVDDL-supply = <&vdd5v>;
+ SPKVDDR-supply = <&vdd5v>;
+
+ interrupts = <347>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&gic>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ #sound-dai-cells = <1>;
+
+ wlf,gpio-defaults = <
+ ARIZONA_GP_FN_TXLRCLK
+ ARIZONA_GP_DEFAULT
+ ARIZONA_GP_DEFAULT
+ ARIZONA_GP_DEFAULT
+ ARIZONA_GP_DEFAULT
+ >;
+
+ clocks = <&clks 0>, <&clks 1>;
+ clock-names = "mclk1", "mclk2";
+
+ wlf,inmode = <ARIZONA_INMODE_DIFF ARIZONA_INMODE_DMIC>;
+ wlf,dmic-ref = <ARIZONA_DMIC_MICBIAS1 ARIZONA_DMIC_MICBIAS3>;
+
+ wlf,use-jd2;
+ wlf,use-jd2-nopull;
+ wlf,jd-invert;
+
+ wlf,micd-software-compare;
+ wlf,micd-detect-debounce = <0>;
+ wlf,micd-pol-gpio = <&codec 2 0>;
+ wlf,micd-rate = <ARIZONA_MICD_TIME_8MS>;
+ wlf,micd-dbtime = <4>;
+ wlf,micd-timeout-ms = <100>;
+ wlf,micd-force-micbias;
+ wlf,micd-configs = <0 ARIZONA_DMIC_MICBIAS1 0>,
+ <0x2000 ARIZONA_DMIC_MICBIAS2 1>;
+
+ wlf,gpsw = <ARIZONA_GPSW_OPEN>;
+ };
+ };
diff --git a/MAINTAINERS b/MAINTAINERS
index 91bf1fbe98c8e..92a96cc0ea734 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -18257,11 +18257,11 @@ L: patches@xxxxxxxxxxxxxxxxxxxxx
S: Supported
W: https://github.com/CirrusLogic/linux-drivers/wiki
T: git https://github.com/CirrusLogic/linux-drivers.git
-F: Documentation/devicetree/bindings/extcon/extcon-arizona.txt
-F: Documentation/devicetree/bindings/mfd/arizona.txt
+F: Documentation/devicetree/bindings/extcon/wlf,arizona.yaml
+F: Documentation/devicetree/bindings/mfd/wlf,arizona.yaml
F: Documentation/devicetree/bindings/mfd/wm831x.txt
-F: Documentation/devicetree/bindings/regulator/arizona-regulator.txt
-F: Documentation/devicetree/bindings/sound/wlf,arizona.txt
+F: Documentation/devicetree/bindings/regulator/wlf,arizona.yaml
+F: Documentation/devicetree/bindings/sound/wlf,arizona.yaml
F: Documentation/hwmon/wm83??.rst
F: arch/arm/mach-s3c64xx/mach-crag6410*
F: drivers/clk/clk-wm83*.c
--
2.11.0