[PATCH 08/14] arm64: dts: sparx5: Add pinctrl support

[Lars Povlsen]

This add pinctrl support to the Microchip Sparx5 SoC.

Reviewed-by: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
Signed-off-by: Lars Povlsen <lars.povlsen@xxxxxxxxxxxxx>
---
 arch/arm64/boot/dts/microchip/sparx5.dtsi | 26 +++++++++++++++++++++++
 1 file changed, 26 insertions(+)

diff --git a/arch/arm64/boot/dts/microchip/sparx5.dtsi b/arch/arm64/boot/dts/microchip/sparx5.dtsi
index 3136b4369f507..45a60993789c8 100644
--- a/arch/arm64/boot/dts/microchip/sparx5.dtsi
+++ b/arch/arm64/boot/dts/microchip/sparx5.dtsi
@@ -102,6 +102,8 @@ gic: interrupt-controller@600300000 {
 		};

 		uart0: serial@600100000 {
+			pinctrl-0 = <&uart_pins>;
+			pinctrl-names = "default";
 			compatible = "ns16550a";
 			reg = <0x6 0x00100000 0x20>;
 			clocks = <&ahb_clk>;
@@ -113,6 +115,8 @@ uart0: serial@600100000 {
 		};

 		uart1: serial@600102000 {
+			pinctrl-0 = <&uart2_pins>;
+			pinctrl-names = "default";
 			compatible = "ns16550a";
 			reg = <0x6 0x00102000 0x20>;
 			clocks = <&ahb_clk>;
@@ -131,5 +135,27 @@ timer1: timer@600105000 {
 			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
 		};

+		gpio: pinctrl@6110101e0 {
+			compatible = "microchip,sparx5-pinctrl";
+			reg = <0x6 0x110101e0 0x90>, <0x6 0x10508010 0x100>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&gpio 0 0 64>;
+			interrupt-controller;
+			interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <2>;
+
+			uart_pins: uart-pins {
+				pins = "GPIO_10", "GPIO_11";
+				function = "uart";
+			};
+
+			uart2_pins: uart2-pins {
+				pins = "GPIO_26", "GPIO_27";
+				function = "uart2";
+			};
+
+		};
+
 	};
 };
--
2.26.2